doi: 10.5862/MCE.56.4

Evaluation of installation efforts in metal coatings, allowing for assembly process

A.B. Bondarev, A. Yugov, Donbas National Academy of Civil Engineering and Architecture, Makeevka, Ukraine

This article gives an account and analysis of the accuracy of assembly variations in the parameters of the stress-strain state - according to values of assembly (initial) efforts. Deviations are determined by the position of nodes and rods in space relative to their design values.

The article considers two technological schemes of the dome cover assembly - from the edge to the center and from the center to the edge. . The accuracy calculation was made with the author's developed computing system "Dimensional analysis of rod structures" . Parameters of the stress-strain state of the dome cover, allowing for the accumulation of assembly deviations, were estimated using the computer complex SCAD.

The results of the calculation effort in the shell, taking into account possible assembly deviations, are presented in the form of histograms; and deviations in the nodes and rods are presented in a tabular form. The data on the assembly effort and the deviations are given for individual items. The author suggests constructive solutions for joining rods and installation method for coatings, which are aimed at increasing their load-bearing capacity, longevity and assemblability.

Key words:

large-span spatial shells; hinged frame structures; installation effects; assembly deviation; assembly errors

Read the whole article (rus) in pdf

(Bondarev A.B., Yugov A. Otsenka montazhnykh usiliy v metallicheskom pokrytii s uchetom sborki [Evaluation of installation efforts in metal coatings, allowing for assembly process]. Magazine of Civil Engineering. 2015. No.4(56). Pp. 28–37).

Under Creative Commons Attribution-NonCommercial 4.0 International License

References:

1. DBN V.1.2-14-2009. Sistema obespecheniya nadyozhnosti i bezopasnosti stroitelnyih ob'ektov. Obschie printsipyi obespecheniya nadyozhnosti i konstruktivnoy bezopasnosti zdaniy, sooruzheniy, stroitelnyih konstruktsiy i osnovaniy [Ukrainian Building Codes. System for assurance of reliability and safety of construction projects. General principles of assurance of reliability and structural safety of bulidings, structures and foundations]. Kiev: Stal, 45 p. (rus)

2. GOST 21778-81. Sistema obespecheniya tochnosti geometricheskih parametrov v stroitelstve. Osnovnyie polozheniya [State standard specification. System for assurance of accuracy of geometrical parameters in construction. General principles]. Moscow: Izdatelstvo standartov, 11 p. (rus)

3. Garifullin M.R., Semenov S.A., Belyaev S.V., Poryvaev I.A., Safiullin M.N., Semenov A.A. Poisk ratsionalnoy geometricheskoy skhemy prostranstvennoy metallicheskoy konstruktsii pokrytiya bolsheproletnogo sportivnogo sooruzheniya [The search of rational shape of spatial metal roof of long-span sport arena]. Construction of Unique Buildings and Structures. 2014. Vol. 2(17). Pp. 107–124. (rus)

4. Gorohov E.V. Povysheniye dolgovechnosti i nadezhnosti metallicheskikh konstruktsiy promyshlennykh zdaniy i sooruzheniy v usloviyakh ekspluatatsii i rekonstruktsii [Increase of durability and reliability of metal structures of industrial buildings and constructions in terms of operation and reconstruction]: The scientific report of Doctor of Technical Sciences. Dnepropetrovsk, 90 p. (rus)

5. Denisov E.V. Opredeleniye parametrov napryazhennogo sostoyaniya elementov, ekspluatiruyemykh metallicheskikh fermennykh konstruktsiy usovershenstvovannym vibratsionnym metodom. [Defining the parameters of the stress state elements operated metal trusses improved vibration-insulating method]: Ph.D. Dissertation. Makeevka, 2006, 226 p. (rus)

6. Nazarov J.P., Gorodetsky A.S., Simbirkin V.N. K probleme obespecheniya zhivuchesti stroitelnykh konstruktsiy pri avariynykh vozdeystviyakh [To the problem of survivability build-enforcement structures in emergency actions]. Building mechanics and calculation of structures. Moscow: ASV, 2009. Vol. 4. Pp. 5–9.

7. Yugov A.M., Bondarev A.B. Otsenka zhivuchesti odnopoyasnoy metallicheskoy obolochki pokrytiya tsilindricheskoy formy vsledstviye pogreshnostey izgotovleniya i montazha [Evaluation of the survivability odnopoyasnoy metal shell cover cylindrical form errors due to the construction and mounting]. International Journal for Computational Civil and Structural Engineering. 2013. Vol. 9(2). Рp. 124–131. (rus)

8. Korchak M.D. Vliyaniye geometricheskikh nesovershenstv na nesushchuyu sposobnost legkikh metallicheskikh konstruktsiy [Influence of geometrical imperfections on the carrying capacity of light metal structures]: Ph.D. Dissertation. Moscow, 1993. 39 p. (rus)

9. Yugov A.M. Deystvitelnaya rabota metallicheskikh reshetchatykh konstruktsiy s nesovershenstvami [Real operation of metal grid structures with imperfections]. Ph.D. thesis in Engineering Science. Odessa. 1988. 200 p. (rus)

10. Kolesnikov G.N. Staticheskiy raschet i formoobrazovaniye nesushchikh karkasov setchatykh obolochek [Static calculations and formation of base plates lattice shells]: Ph.D. thesis in Engineering Science. Rostov-on-Don, 1982. 21 p. (rus)

11. Vatin N.I., Kuznetsov V.D., Nedviga E.S. Installation errors in calculating large-panel buildings [Accounting installation errors in the calculation of large-panel buildings]. Magazine of Civil Engineering. 2011. No. 6. Pp. 35–40. (rus)

12. Konin D.V. Napryazhenno-deformirovannoye sostoyaniye kolonn vysotnykh zdaniy s metallicheskim karkasom s uchetom netochnostey montazha [The stress-strain state of the columns of high-rise buildings with metal frames with the uncertainties of installation]: Ph.D. Dissertation. Moscow, 2011, 24 p. (rus)

13. Sno V. Ye. Statisticheskiy analiz pogreshnostey montazha kolonn karkasnykh zdaniy [Statistical analysis of installation errors columns frame buildings]. Building mechanics and calculation of structures. 1984, Vol. 6. Рp. 5–9. (rus)

14. Isaev S.V. Metodika otsenki lineynoy modeli prostranstvennoy razmernoy tsepi dlya obespecheniya vzaimozamenyayemosti obyektov proizvodstva pri sborke [Methodology to evaluate the linear model of the spatial dimension chain to ensure interchangeability of production facilities for assembly]. Ph.D. Dissertation. Moscow, 2007. 204 p. (rus)

15. Kashuba L.A. Geometriya sborki nedeformiruyemykh detaley [Deformable geometry of the assembly parts]. System analysis in science and education. Electronic scientific journal. Dubna. 2011. No.4. URL: http: www.sanse.ru/archive/19 (rus)

16. Alyamovskiy A.A., Sobachkin A.A., Odintsov Ye.V., Kharitonovich A.I., Ponomarev N.B. Solid Works. Kompyuternoye modelirovaniye v inzhenernoy praktike [Solid Works. Computer modeling in engineering practice]. Saint-Petersburg: BHV-Petersburg. 2005. 800 p. (rus)

17. Kulyabko V.V., Banakh V.A., Redchenko V.P. Problemy modelirovaniya dinamicheskikh nagruzok i raschetnykh skhem sooruzheniy, provedeniya dinamicheskikh ispytaniy i analiza ikh rezultatov [Problems simulation of dynamic loads and design schemes structures, dynamic testing and analyzing their results]. The tower structures: materials, design, and technology. Makeyevka: DonNACEA, 2009, Vol. 3(83). Pp. 84–89. (rus)

18. Belostotskiy A.M., Pavlov A.S. Kompleksnoye konechnoelementnoye modelirovaniye NDS i ustoychivosti setchatoy obolochki pokrytiya bolsheproletnogo sooruzheniya s elastomernymi oporami [Complex finite element simulation of stress-strain state and stability of braced shell with elastomeric bearings]. International journal for computational civil and structural engineering. 2014. Vol. 10(3). Pp. 64–70. (rus)

19. Pavlov A.S. Chislennoye modelirovaniye nelineynykh protsessov razrusheniya konstruktsiy bolsheproletnykh sooruzheniy [Numerical simulation of nonlinear processes of destruction of structures of large-span structures]: Ph.D. Dissertation. Moscow, 2011. 24 p. (rus)

20. Perelmuter A.V. Proverka ustoychivosti konstruktsiy, raschet kotorykh vypolnyayetsya s uchetom stadiynosti montazha [Checking the stability of structures, which is calculated based on the staged installation]. International Journal for Computational Civil and Structural Engineering. 2014. Vol. 10(4). Pp. 22–28. (rus)

21. Buyakas V.I. Staticheski opredelimyye reguliruyemyye struktury i ikh prilozheniya v tekhnicheskikh zadachakh kosmicheskoy astronomii [Statically determinate controlled structures and their imposition in engineering problems of space astronomy]: Doctoral Dissertation. Moscow, 2004. 190 p. (rus)

22. Goldenblat I.I., Nikolayenko N.A., Polyakov S.V., Ulyanov S.V. Modeli seysmostoykosti sooruzheniy [Models of Earthquake Engineering]. Moscow: Nauka. 1979. 252 p. (rus)

23. Larionov V.V., Molchanov A.A., Kalashnikov G.V. Metallicheskiye konstruktsii nazemnogo oborudovaniya, razrabotannyye TsNIIPSK im. Melnikova dlya kosmicheskikh startov [Metal Constructions ground equipment, designed, by TsNIIPSK Melnikova for space launches]. Industrial and civil engineering. 2005, Vol. 10. Pp. 60–63. (rus)

24. Abovskiy N.P. Upravlyayemyye konstruktsii [Controlled design. Textbook]. Krasnoyarsk: KamKras, 1998. 433 p. (rus)

25. Farrar C.R., Worden K., Todd M. D., Park G., Nichols J., Adams D. E., Bement M. T., Farinholt K. Impacts of artificial intelligence and optimization on design, construction and maintenance. Los Alamos, New Mexico: Los Alamos. National Laboratory, 2007. 143 р.

26. Gantes C.J., Connor J.J., Lwxhеr R.D., Rosenfeld Y. Structural analysis and design of deployable structures. Computers and Structures. 1989. Vol. 32(3-4). Рр. 661–669.

27. Gaul L., Albrecht H., Wirnitzer J. Semi-active friction damping of large space truss structures. Shock and Vibration. 2004. Vol. 11. Pр. 173–186.

28. Hasan R., Xu L., Grierson D. E. Push-over analysis for performance-based seismic design. Computers and Structures. 2002. № 80. Рр. 2483–2493.

29. Kartal M.E., Basaga H.B., Bayraktar A., Muvafık M. Effects of semi-rigid connection on structural responses. Electronic Journal of Structural Engineering. 2010. Vol. 10. Рр. 22–35.

30. Kaveh A., Nouri M. Weighted graph products for configuration processing of planar and space structures. International Journal of Space Structures. 2009. Vol. 24. №1. Рр. 13–26.

31. Matsumoto K., Wakabayashi S., Noumi M., Yoshida T., Ueno H., Fukase Y. Space Truss Handling Experiment on ETS-VII. Automation and Robotics in Construction XVI. UC3M. 1999. Рр. 225–230.

32. Keleşoglu O., Ulker M. Fuzzy optimization of geometrical nonlinear space truss design. Turkish Journal of Engineering and Environmental Sciences. 2005. Vol. 80, № 5. Рp. 321–329.

33. Preumont A. Vibration control of active structures: an introduction. 2-nd Edition. New York, Boston, Dordrecht, London, Moscow: Kluwer Academic Publishers, 2002. 385 p.

34. Tokunbo Ogunfunmi. Adaptive Nonlinear System Identification. The Volterra and Wiener Model Approaches. USA: Springer Science+Business Media, LLC, 2007. 229 р.

35. Kim H.M., Bartkowicz T.J. Damage detection and health monitoring of large space structures. Proceedings of the 34th AIAA SDM Conference. La Jolla, California, April, 1993. Pр. 3527–3533.

36. Pearson J.E., Hansen S. Experimental Studies of a Deformable-Mirror Adaptive Optical System. Journal of Optical Society America. 1977. № 67. Рр. 360–369.

37. Rabinovich I. M. Kurs stroitelnoy mekhaniki sterzhnevykh sistem. Chast ІІ. Staticheski neopredelimyye sistemy [The course of structural mechanics of rod systems. Part II. Statically indeterminate system. 2-nd edition, revised]. Moscow: State Publishing House of Literature on construction and architecture, 1954. 544 p. (rus)

38. GOST 21780-2006. Sistema obespecheniya tochnosti geometricheskikh parametrov v stroitel'stve. Raschet tochnosti. [State standard specification. System for ensuring the accuracy of the geometric parameters in construction. Calculation accuracy] Moscow: Publishing standards. 13 р. (rus)

39. Bondarev A.B., Yugov A.M. Kompyuternaya programma «Vychislitelnyy kompleks «Razmernyy analiz sterzhnevykh konstruktsiy» («VK RASK») [Patent. Computer program «Computing system "Dimensional analysis of rod structures"» («CS DARS»)]. Ukraine. No.48382; preference, 20.12.2012; published, 20.02.2013, Ballot papers No.1. 2 p. (rus)

40. Belyaev N. M. Soprotivleniye materialov. [Strength of materials] Moscow: Nauka, 1965. 856 p. (rus)

41. DBN В.2.6-163:2011. Stroitel'nye materialy i konstruktsii. Stal'nye konstruktsii. Normy proektirovaniya, izgotovleniya i montazha. [Ukrainian Building Codes. The constructions of buildings and structures. The steel constructions. Norms for design, fabrication and erection]. Kiev: Ministry of Regional Development of Ukraine, 2011. 127 p. (rus)

42. Bondarev A.B., Yugov A.M. Sposob montazha bol'sheproletnykh sterzhnevykh metallicheskikh pokrytij. Pat. Number 79680 Ukraine, IPC E04V 1/32; E04V 1/58 [Installation method of large-core metal coatings]. Patent. № u 2012 13187; 19.11.2012 stated; published 25.04.2013, Bulletin № 1. 5 р. (rus)





Search
 
Contact us Site map
All rights reserved. When using the information from this site the mention of the resource is obligatory