Articles by keywords "compressive strength"
Production of glass-alkali binder for construction purposes by recycling of cullet
- Year: 2025
- Volume: 18
- Issue: 4
- 89
- 475
- Pages: 13602-13602
Simplified finite element model for rectangular CFST columns strength calculation under eccentric compression
- Year: 2025
- Volume: 18
- Issue: 2
- 104
- 3109
- Pages: 13406-13406
Axial capacity and ductility of reinforced concrete columns with strip plate steel and conventional stirrup reinforcements
- Year: 2025
- Volume: 18
- Issue: 1
- 122
- 3296
- Pages: 13304-13304
Electrically conductive cement composites modified with weakly oxidized graphene
- Year: 2024
- Volume: 17
- Issue: 8
- 68
- 3339
- Pages: 13203-13203
Strength and thermal conductivity properties of thermowood-cement composition
- Year: 2024
- Volume: 17
- Issue: 7
- 52
- 2641
- Pages: 13107-13107
Ground granulated blast furnace slag and fly ash concrete
- Year: 2024
- Volume: 17
- Issue: 7
- 93
- 2628
- Pages: 13103-13103
Artificial intelligence models for determining the strength of centrally compressed pipe-concrete columns with square cross-section
- Year: 2024
- Volume: 17
- Issue: 6
- 48
- 2407
- Pages: 13008-13008
Effects of chicken bone powder mixed with limestone and cement on the clayey soil geotechnical characteristics
- Year: 2024
- Volume: 17
- Issue: 6
- 60
- 2286
- Pages: 13003-13003
Effect of nanosilica on properties of porcelanite aggregate concrete
- Year: 2024
- Volume: 17
- Issue: 5
- 71
- 2299
- Pages: 12905-12905
Stabilization of expansive soil with lime and brick dust
- Year: 2023
- Issue: 8
- 125
- 3543
- Pages: 12401-12401
Shear strength and chemical properties of soft clayey soil treated with magnetized water
- Year: 2023
- Issue: 8
- 57
- 2720
- Pages: 12406-12406
Self-compacting concrete with finely dispersed additives and superplasticizer
- Year: 2023
- Issue: 7
- 272
- 3509
- Pages: 12306-12306
Performance of aluminium shaving waste and silica fume blended mortar
- Year: 2023
- Issue: 6
- 46
- 2574
- Pages: 12209-12209
Experimental behavior of novel GFRP reinforcing bars under compressive loads
- Year: 2023
- Issue: 2
- 60
- 3812
- Pages: 11805-11805
Performance of waste foundry sand concrete in sulfate environment
- Year: 2023
- Issue: 2
- 75
- 3242
- Pages: 11801-11801
Peculiarities of hydration and frost resistance of cement with natural zeolite additive
- Year: 2023
- Issue: 1
- 59
- 3243
- Pages: 11711-11711
Effects of gradation and clay minerals on stabilized lateritic soil blocks
- Year: 2023
- Issue: 1
- 78
- 3152
- Pages: 11704-11704
Size effect of cube specimen on strength of expanded clay fiber-reinforced concrete
- Year: 2022
- Issue: 8
- 74
- 2891
- Pages: 11612-11612
Porous glass ceramics from siliceous rocks with high operating temperature
- Year: 2022
- Issue: 8
- 77
- 3052
- Pages: 11615-11615
Structure and properties of cement systems with additives of calcined clay and carbonate rocks
- Year: 2022
- Issue: 8
- 103
- 3966
- Pages: 11602-11602
Influence of NaOH-concentration and blast-furnace-slag on the properties of geopolymer mortars
- Year: 2022
- Issue: 7
- 73
- 3399
- Pages: 11514-11514
High performance lightweight concretes for 3D printing
- Year: 2022
- Issue: 7
- 117
- 3547
- Pages: 11510-11510
Complex modified additive for concrete based on industrial waste
- Year: 2022
- Issue: 7
- 53
- 2999
- Pages: 11507-11507
Comparative feasibility analysis of fly ash bricks, clay bricks and fly ash incorporated clay bricks
- Year: 2022
- Issue: 7
- 123
- 4262
- Pages: 11502-11502
High-performance fine-grained nanostructured concrete based on low strength aggregates
- Year: 2022
- Issue: 6
- 50
- 3252
- Pages: 11413-11413
Aerated dry mix concrete for remote northern territories
- Year: 2022
- Issue: 5
- 40
- 3015
- Pages: 11310-11310
Metamorphic rocks for manufactured sand and coarse aggregate for concrete and mortar
- Year: 2022
- Issue: 5
- 63
- 4623
- Pages: 11308-11308
Fluorоanhydrite based composites with the thermoplastic additive
- Year: 2022
- Issue: 4
- 59
- 3350
- Pages: 11210-11210
Cement grinding aid based on glycerol-waste antifreeze
- Year: 2022
- Issue: 4
- 56
- 3188
- Pages: 11214-11214
Lightweight concrete for 3D-printing with internal curing agent for Portland cement hydration
- Year: 2022
- Issue: 1
- 131
- 3772
- Pages: 10915-10915
Different types of basalt fibers for disperse reinforcing of fine-grained concrete
- Year: 2022
- Issue: 1
- 88
- 3798
- Pages: 10913-10913
The strength of fly ash concrete of experimental design
- Year: 2022
- Issue: 1
- 124
- 4487
- Pages: 10911-10911
Differential characteristics of concrete in centrifugally spun and vibrospun building structures
- Year: 2021
- Issue: 8
- 83
- 4040
- Pages: 10812-10812
Waste iron powder as aggregate and binder in mortar production
- Year: 2021
- Issue: 8
- 68
- 3766
- Pages: 10810-10810
Physical and mechanical properties of construction and demolition waste
- Year: 2021
- Issue: 8
- 134
- 4447
- Pages: 10804-10804
Properties of fine-grained concrete containing fly ash and bottom ash
- Year: 2021
- Issue: 7
- 106
- 3911
- Pages: 10711-10711
Technogenic anhydrite binder for high-strength concrete
- Year: 2021
- Issue: 7
- 51
- 3469
- Pages: 10701-10701
Composite non-autoclaved aerated concrete based on an emulsion
- Year: 2021
- Issue: 6
- 76
- 4827
- Pages: 10605-10605
A deformed state of the composite frame with phased installation
- Year: 2021
- Issue: 5
- 42
- 3453
- Pages: 10512-10512
Experimental characterization of brick masonry for lateral strength evaluation
- Year: 2021
- Issue: 4
- 79
- 4671
- Pages: 10409-10409
Properties of porous glass ceramics based on siliceous rocks
- Year: 2021
- Issue: 2
- 129
- 4482
- Pages: 10202-10202
Silica concrete compressive behavior under alternating magnetic field
- Year: 2021
- Issue: 1
- 102
- 4084
- Pages: 10112-10112
Stabilization of lateritic soil for masonry applications
- Year: 2021
- Issue: 1
- 119
- 4903
- Pages: 10109-10109
Basalt fiber reinforced expanded clay concrete for building structures
- Year: 2021
- Issue: 1
- 165
- 5013
- Pages: 10107-10107
Influence of raw greywater on compressive strength of concrete
- Year: 2020
- Issue: 8
- 86
- 4400
- Pages: 10010-10010
The formation mechanism of the porous structure of glass ceramics from siliceous rock
- Year: 2020
- Issue: 8
- 98
- 4468
- Pages: 10006-10006
Influence of polypropylene-fiber on the mechanical properties of self-compacting-concrete with recycled aggregates
- Year: 2020
- Issue: 7
- 101
- 4161
- Pages: 9905-9905
Mechanical-thermal characteristics of foamed ultra-lightweight composites
- Year: 2020
- Issue: 6
- 120
- 4721
- Pages: 9802-9802
Clinkerless slag-silica binder: hydration process and hardening kinetics (part 2)
- Year: 2020
- Issue: 5
- 93
- 3707
- Pages: 9712-9712
Stress-strain state of the precast monolithic bent element
- Year: 2020
- Issue: 5
- 44
- 4133
- Pages: 9706-9706
Influence of silica fume on the pervious concrete with different levels of recycled aggregates
- Year: 2020
- Issue: 1
- 241
- 6071
- Pages: 71-82
Lightweight geopolymers made of mineral wool production waste
- Year: 2020
- Issue: 1
- 267
- 5806
- Pages: 3-12
Сlinkerless slag-silica binder: hydration process and hardening kinetics
- Year: 2019
- Issue: 8
- 113
- 4838
- Pages: 96-105
Strength and microstructure of alkali-activated natural pozzolan and limestone powder mortar
- Year: 2019
- Issue: 8
- 157
- 4980
- Pages: 36-47
The fine high-calcium fly ash as the basis of composite cementing material
- Year: 2019
- Issue: 7
- 150
- 5431
- Pages: 60-72
Physical and mechanical properties of cement stone with superabsorbent polyacrylate solutions
- Year: 2019
- Issue: 5
- 113
- 4459
- Pages: 179-186
Estimation of masonry mortars strength during stone buildings investigation
- Year: 2011
- Issue: 7
- 39
- 4185
- Pages: 3-10
Compressive strength of concrete with millet husk ash (MHA) as a partial replacement for cement
- Year: 2015
- Issue: 7
- 61
- 4430
- Pages: 74-79
The influence of clay additives in Portland cement on the compressive strength of the cement stone
- Year: 2015
- Issue: 7
- 70
- 4688
- Pages: 66-73
Fiber fine-grained concretes with polyfunctional modifying additives
- Year: 2017
- Issue: 4
- 43
- 5168
- Pages: 73-83
The phase composition and properties of aluminate cements after early loading
- Year: 2017
- Issue: 7
- 27
- 4158
- Pages: 114-122