Articles from section "Building constructions, buildings and structures"
Target reliability of alternative fundamental combinations in Eurocode EN1990
- Year: 2022
- Issue: 1
- 36
- 695
- Pages: 10912-10912
Corrosion resistance of steel structures in marine conditions
A.A. Alhimenko
N.O. Shaposhnikov
A.A. Kharkov
D.A. Strekalovskaya
E.L. Alekseeva
M.A. Kovalev
M.L. Shishkova
- Year: 2021
- Issue: 8
- 88
- 599
- Pages: 10815-10815
Properties of tropically sourced timber subjected to elevated temperature
- Year: 2021
- Issue: 8
- 30
- 376
- Pages: 10811-10811
Effect of irregularity on seismic design parameters of RC-infilled structures
- Year: 2021
- Issue: 8
- 31
- 421
- Pages: 10807-10807
Effectiveness of base-isolated low-rise masonry building under excitation from earthquakes
- Year: 2021
- Issue: 8
- 74
- 769
- Pages: 10803-10803
Application of SMA anchors to the seismic performance of tanks
- Year: 2021
- Issue: 8
- 60
- 685
- Pages: 10802-10802
Ultra high-performance fiber reinforced concrete panel subjected to high velocity impact
- Year: 2021
- Issue: 7
- 62
- 433
- Pages: 10703-10703
Thin-walled compressed steel constructions under fire load
- Year: 2021
- Issue: 5
- 69
- 565
- Pages: 10514-10514
Deflection of a cladding panel of fully tempered glass in curtain wall system
- Year: 2021
- Issue: 4
- 87
- 970
- Pages: 10403-10403
Stochastic model of the construction process implemented with application of sliding formwork
- Year: 2021
- Issue: 1
- 43
- 845
- Pages: 10111-10111
The influence of reinforcing joints on the fire resistance of reinforced concrete structures
- Year: 2020
- Issue: 8
- 98
- 1091
- Pages: 10004-10004
Behavior of strengthened concrete beams damaged by thermal shock
- Year: 2020
- Issue: 2
- 156
- 1484
- Pages: 93-107
Finite element modeling of cold-formed steel deck in bending
- Year: 2020
- Issue: 2
- 150
- 1365
- Pages: 129-144
Technical diagnostics of reinforced concrete structures using intelligent systems
- Year: 2020
- Issue: 1
- 266
- 2042
- Pages: 13-26
Failure simulation of a RC multi-storey building frame with prestressed girders
- Year: 2019
- Issue: 8
- 180
- 1866
- Pages: 155-162
Stress-strain state of a glass panel with adhesive point fixings
- Year: 2019
- Issue: 8
- 95
- 1303
- Pages: 127-141
Timber frame buildings with efficient junction designs for earthquake-prone areas
- Year: 2019
- Issue: 8
- 137
- 1790
- Pages: 84-95
Bending and torsion behaviour of CFRP strengthened RC beams
- Year: 2019
- Issue: 8
- 148
- 1653
- Pages: 48-62
Dynamic deformation of a beam at sudden structural transformation of foundation
- Year: 2019
- Issue: 7
- 135
- 3205
- Pages: 129-144
An improved membrane element for high-rise building with shear walls
- Year: 2019
- Issue: 7
- 77
- 1399
- Pages: 121-128
Structural performance of reinforced concrete beams containing plastic waste caps
- Year: 2019
- Issue: 7
- 116
- 1791
- Pages: 73-79
Optimization of steel beam structures for frame buildings subject to their safety requirements
- Year: 2019
- Issue: 7
- 213
- 1897
- Pages: 3-15
Ductility and moment redistribution capacity of two-span RC beams
- Year: 2019
- Issue: 6
- 160
- 1633
- Pages: 104-118
Сoordinate functions quadratic approximation in V.I. Slivker's semi-shear stability theory
- Year: 2019
- Issue: 5
- 117
- 1549
- Pages: 115-128
Strengthening of RC beams by ferrocement made with unconventional concrete
- Year: 2019
- Issue: 5
- 195
- 2201
- Pages: 94-105
Mixed finite-element method in V.I. Slivker’s semi-shear thin-walled bar theory
- Year: 2019
- Issue: 5
- 149
- 1787
- Pages: 79-93
Nonlinear deformation and stability of geometrically exact elastic arches
- Year: 2019
- Issue: 5
- 180
- 2020
- Pages: 39-51
Static accounting of highest modes in problems of structural dynamics
- Year: 2019
- Issue: 4
- 296
- 2279
- Pages: 3-13
Shear lag phenomenon in the tubular systems with outriggers and belt trusses
- Year: 2019
- Issue: 2
- 80
- 1622
- Pages: 105-118
Behaviour of axisymmetric thick plates resting against conical surface
- Year: 2019
- Issue: 2
- 90
- 1905
- Pages: 92-104
Modelling the stressed skin effect by using shell elements with meta-material model
- Year: 2019
- Issue: 2
- 82
- 1434
- Pages: 20-29
Manufacturing structural building components from round timber with heartwood rot
- Year: 2019
- Issue: 2
- 57
- 1571
- Pages: 11-19
Destruction of building materials in terms of the method of crystallization in gels
- Year: 2009
- Issue: 3
- 6
- 1189
- Pages: 53-60
Compressive stability of composite columns made of high-strength steel profiles
- Year: 2009
- Issue: 3
- 21
- 1194
- Pages: 42-49
Strengthening of building structures using post-stressed reinforced concrete
- Year: 2009
- Issue: 3
- 39
- 1551
- Pages: 29-32
The spatial rigidity assurance of coating in light-gauge thin structure buidings
- Year: 2009
- Issue: 6
- 35
- 1438
- Pages: 12-15
Calculation of concrete structures strengthening with compound materials
- Year: 2009
- Issue: 3
- 27
- 1289
- Pages: 25-28
Strengthening of reinforced concrete structures using polymer compounds
- Year: 2009
- Issue: 3
- 35
- 1350
- Pages: 22-24
Pipe protecting screen use in the construction of underground structures in Saint-Petersburg
- Year: 2009
- Issue: 7
- 10
- 1236
- Pages: 6-9
Strengthening of building structures using carbon composite materials
- Year: 2010
- Issue: 2
- 56
- 1927
- Pages: 19-22
Influence of mortar joints in aerocrete-work on the thermotechnical homogeneity of walls
- Year: 2010
- Issue: 3
- 44
- 1671
- Pages: 39-42
External reinforcement of reinforced concrete column by composite coal-plastic material
- Year: 2010
- Issue: 3
- 12
- 1298
- Pages: 35-38
Early loading of floor monolithic slabs with removable forms
- Year: 2010
- Issue: 4
- 15
- 1195
- Pages: 17-20
Monolithic constructions made of light nanoconcrete by the example of 5-story multilayer parking
- Year: 2010
- Issue: 5
- 8
- 1168
- Pages: 12-15
Constructional approach of ventilated facade with increased reliability
- Year: 2010
- Issue: 8
- 43
- 1503
- Pages: 5-9
Humidity conditions of the external thermal insulation composite systems with the ventilated air gap
- Year: 2010
- Issue: 8
- 18
- 1347
- Pages: 10-15
About the calculation of reduced total thermal resistance of walling
- Year: 2010
- Issue: 8
- 14
- 1410
- Pages: 21-27
Increase in double-wall constructions acoustic isolation due to the use of soundproof bridges
- Year: 2009
- Issue: 2
- 11
- 1219
- Pages: 46-53
Effect of acoustic holes on sound isolation of building structures
- Year: 2009
- Issue: 1
- 12
- 1324
- Pages: 17-21
Frame systems used in enclosure structure in construction from monolithic autoclaved aerated concrete
- Year: 2009
- Issue: 1
- 11
- 1269
- Pages: 13-16
The use of CAD for solving research problems in the power pole design
- Year: 2009
- Issue: 1
- 6
- 1224
- Pages: 6-12
Quantitative assessment of the conservative addition transfer by filtration flow through the wall
- Year: 2012
- Issue: 6
- 4
- 1306
- Pages: 36-41
External reinforcing of fiber concrete constructions by carbon fiber tapes
- Year: 2013
- Issue: 1
- 20
- 1258
- Pages: 21-26
Towards the anchors behavior in multilayer building envelope with face brick layer
- Year: 2013
- Issue: 1
- 24
- 1551
- Pages: 3-11
Features of the calculation and installation of buildings with internal framework
- Year: 2008
- Issue: 2
- 13
- 1281
- Pages: 17-26
Determination of optimal damping parameters for seismic isolation systems
- Year: 2013
- Issue: 5
- 20
- 1547
- Pages: 107-115
Influence of circuit temperature during the construction of the voltage in load-bearing structure
- Year: 2008
- Issue: 2
- 22
- 1332
- Pages: 8-16
Extremal calculation problems of free convective movements in ventilated facades
- Year: 2013
- Issue: 8
- 4
- 1340
- Pages: 46-53
Quadrilateral shell finite element for analysis of thin-walled reinforced concrete structures
- Year: 2014
- Issue: 5
- 10
- 1441
- Pages: 27-36
Allowing for changes in the calculated scheme during the analysis of structural behaviour
- Year: 2014
- Issue: 5
- 28
- 1523
- Pages: 15-26
Problems of completion of nuclear power plant units after long-term conservation
- Year: 2008
- Issue: 1
- 17
- 985
- Pages: 42-43
Behaviour of load-carrying members of velodromes’ long-span steel roof
- Year: 2016
- Issue: 5
- 22
- 1526
- Pages: 3-16
Analysis of local stability of the rectangular tubes filled with concrete
- Year: 2016
- Issue: 4
- 29
- 1537
- Pages: 59-68
Analysis of the buckling of spatial truss with cross lattice
- Year: 2016
- Issue: 4
- 23
- 1779
- Pages: 52-58
Structural health monitoring of a concrete-filled tube column
- Year: 2019
- Issue: 1
- 59
- 1658
- Pages: 136-145
Durability and Deformability of Braced Bending Elements with External Sheet Rreinforcement
- Year: 2016
- Issue: 3
- 20
- 1564
- Pages: 3-15
Тhe method of calculating the accuracy of large-span metal rod systems
- Year: 2016
- Issue: 1
- 19
- 1724
- Pages: 60-73
The optimum geometry of the flat diagonal truss taking into account the linear creep
- Year: 2016
- Issue: 1
- 12
- 1807
- Pages: 25-32
Design methods of timber-concrete composite ceiling structure
- Year: 2017
- Issue: 5
- 26
- 1466
- Pages: 88-95
Dome houses made of soil-concrete based on local raw materials
- Year: 2017
- Issue: 7
- 32
- 1396
- Pages: 123-128
Deformation compatibility of masonry and composite materials
- Year: 2018
- Issue: 2
- 27
- 1584
- Pages: 136-150
Ultra-light hybrid composite wood-polymer structural materials in construction
- Year: 2018
- Issue: 3
- 42
- 1520
- Pages: 132-139
Compressed-bent masonry walls reinforced with composite materials
- Year: 2018
- Issue: 3
- 45
- 3389
- Pages: 112-119
Behavior of a hollowed-wood ventilated façade during temperature changes
- Year: 2018
- Issue: 3
- 33
- 1458
- Pages: 103-111
Strength of composite steel and concrete beams of highperformance concrete
- Year: 2018
- Issue: 3
- 52
- 1517
- Pages: 36-44
Temperature and velocity conditions in vertical channel of ventilated facade
- Year: 2018
- Issue: 4
- 21
- 1416
- Pages: 119-127
Cold-formed RHS T joints with initial geometrical imperfections
- Year: 2018
- Issue: 4
- 23
- 1753
- Pages: 81-94
Wooden beams with reinforcement along a curvilinear trajectory
- Year: 2018
- Issue: 5
- 32
- 1587
- Pages: 193-201
Installation diagram of the lattice truss with an arbitrary number of panels
- Year: 2018
- Issue: 5
- 11
- 1567
- Pages: 174-182
Computational modelling of stiffness and strength properties of the contact seam
- Year: 2018
- Issue: 5
- 13
- 1430
- Pages: 149-159
Bearing capacity of pasted anchors in the masonry walls of natural limestone
- Year: 2018
- Issue: 5
- 22
- 1422
- Pages: 52-63
Analytical calculation of the frame with an arbitrary number of panels
- Year: 2018
- Issue: 6
- 17
- 1326
- Pages: 127-135
Lightweight steel concrete structures technology with foam fiber-cement sheets
- Year: 2018
- Issue: 6
- 92
- 2033
- Pages: 103-111
Optimization of hybrid I-beams using modified particle swarm method
- Year: 2018
- Issue: 7
- 27
- 1334
- Pages: 175-185
Ultimate state of the support zone of reinforced concrete beams
- Year: 2018
- Issue: 7
- 53
- 1404
- Pages: 165-174
Suspension structure with cross-laminated timber deck panels
- Year: 2018
- Issue: 7
- 26
- 1796
- Pages: 126-132
Additional load on barrel vaults of architectural monuments
- Year: 2018
- Issue: 8
- 29
- 1693
- Pages: 15-28