Chloride diffusion in concrete with silica fume under early-age exposure

Building Materials
Authors:
Abstract:

This study investigates chloride diffusion in marine concrete structures during early-age curing, specifically slip-formed caissons and cast-in-place quay walls where concrete experiences chloride ingress before achieving full strength. The research examines how early-age exposure affects long-term chloride diffusion coefficients in conventional concrete and silica fume-modified concrete. Early-age chloride exposure critically compromises marine concrete durability, yet standardized testing typically evaluates concrete at 28 days or later. Understanding this impact is essential for accurate service-life prediction, but conventional concentration profile methods are labor-intensive and expensive, necessitating more efficient assessment techniques. We employed a rapid colorimetric technique under natural diffusion conditions to determine apparent chloride diffusion coefficients () for concrete mixes with water-cement ratios of 0.3, 0.4, and 0.5, both with and without 10% silica fume. The study compared diffusion coefficients across multiple exposure intervals from casting (0 days) to 1, 3, 7, 28, and 180 days. Results show early-age exposure significantly elevates long-term : for plain concrete, 0−180 days exposure increased by 58% compared to standard 28−180 days exposure. The colorimetric method revealed an even more pronounced effect (235% increase) for silica fume concrete. Diffusion coefficients for 0−1-day intervals were approximately 82 times higher than 0−180-day intervals. Silica fume reduced by 65% for 0−180 days and 81% for 28−180 days compared to control mixes. The findings demonstrate that early-age chloride exposure substantially impacts long-term durability, with the colorimetric method providing a more conservative assessment than traditional methods. Delaying exposure by just three days significantly improves performance, with 3−180 days exposure showing only 8% higher than standard exposure. These results emphasize the necessity of accounting for early-age chloride ingress in coastal infrastructure design and validate silica fume as an effective material for enhancing marine concrete resilience.

  • References
    1. Kang, W., Mei, K., Liu, W., Sun, S. Study on Chloride Diffusion Performance and Structural Durability Design of UHPC Under Chloride Salt Erosion. Buildings. 2025. 15(19). Article no. 3569. DOI: 10.3390/buildings15193569
    2. Xu, Z., Ye, G. Understanding Chloride Diffusion Coefficient in Cementitious Materials. Materials. 2023. 16(9). Article no. 3464. DOI: 10.3390/ma16093464
    3. Razmi, A., Bennett, T., Xie, T., Visintin, P. A phenomenological model for chloride diffusion coefficient in concretes with traditional and blended binders and alternative fillers. Construction and Building Materials. 2025. 461. Article no. 139783. DOI: 10.3390/ma16093464
    4. Wang, Y., Liao, J., Zhang, B. A Review of Chloride Penetration of Recycled Concrete with Enhancement Treatment and Service Life Prediction. Materials. 2024. 17(6). Article no. 1349.
    5. Khan, Z.H., Alhasan, A. A Comparison of Service Life Models for Concrete Corrosion Durability. Florida Department of Transportation, 2023. 53 p.
    6. Xu, Q., Liu, B., Dai, L., Yao, M., Pang, X. Factors Influencing Chloride Ion Diffusion in Reinforced Concrete Structures. Materials. 2024. 17(13). Article no. 3296. DOI: 10.3390/ma17133296
    7. Caballero, J., Polder, R.B., Leegwater, G., Fraaij, A.L. Chloride penetration into cementitious mortar at early age. Heron. 2012. 57(3). Pp. 185–196.
    8. Fraj, A.B., Bonnet, S., Leklou, N., Khelidj, A. Investigating the early-age diffusion of chloride ions in hardening slag-blended mortars on the light of their hydration progress. Construction and Building Materials. 2019. 225. Pp. 485–495. DOI: 10.1016/j.conbuildmat.2019.07.185
    9. Bagheri, A., Ajam, A., Zanganeh, H. Investigation of chloride ingress into concrete under very early age exposure conditions. Construction and Building Materials. 2019. 225. Pp. 801–811. DOI: 10.1016/j.conbuildmat.2019.07.225
    10. Bagheri, A., Ajam, A., Zanganeh, H. Effect of very early age exposure on chloride ingress and service life performance of binary and ternary concretes. Construction and Building Materials. 2021. 289. Article no. 123137. DOI: 10.1016/j.conbuildmat.2021.123137
    11. Kim, M.Y., Yang, E.I., Yi, S.T. Application of the colorimetric method to chloride diffusion evaluation in concrete structures. Construction and Building Materials. 2013. 41. Pp. 239–245. DOI: 10.1016/j.conbuildmat.2012.11.084
    12. He, F., Shi, C., Yuan, Q., An, X., Tong, B. Calculation of chloride concentration at color change boundary of AgNO3 colorimetric measurement. Cement and Concrete Research. 2012. 41(11). Pp. 1095–1103. DOI: 10.1016/j.cemconres.2011.06.008
    13. Aoki, Y., Shimano, K., Suzuki, M. Chloride ion concentration on the discoloration boundary produced by spraing AgNO3 solution. Proceedings of 35th Conference on OUR WORLD IN CONCRETE & STRUCTURES. Singapore, 2010. 8 p.
    14. Otsuki, N., Nagataki, S., Nakashita, K. Evaluation of the AgNO3 solution spray method for measurement of chloride penetration into hardened cementitious matrix materials. Construction and Building Materials. 1993. 7(4). Pp. 195–201. DOI: 10.1016/0950-0618(93)90002-T
    15. Shafikhani, M., Chidiac, S.E. Quantification of concrete chloride diffusion coefficient – A critical review. Cement and Concrete Composites. 2019. 99. Pp. 225–250. DOI: 10.1016/j.cemconcomp.2019.03.011
    16. Higashiyama, H., Yamauchi, K., Sappakittipakorn, M., Sano, M., Takahashi, O. A visual investigation on chloride ingress into ceramic waste aggregate mortars having different water to cement ratios. Construction and Building Materials. 2013. 40. Pp. 1021–1028. DOI: 10.1016/j.conbuildmat.2012.11.078
    17. Sadrinejad, I., Madandoust, R., Ranjbar, M.M. The mechanical and durability properties of concrete containing hybrid synthetic fibers. Construction and Building Materials. 2018. 178. Pp. 72–82. DOI: 10.1016/j.conbuildmat.2018.05.145
    18. Javier, A.R.A., Lopez, N.E., Juanzon, J.B.P. Compressive Strength and Chloride Penetration Tests of Modified Type IP Cement Concrete with Rice Ash. Procedia Engineering. 2017. 171. Pp. 543–548. DOI: 10.1016/j.proeng.2017.01.369
    19. De Weerdt, K., Justnes, H., Geiker, M.R. Changes in the phase assemblage of concrete exposed to seawater. Cement and Concrete Composites. 2014. 47. Pp. 53–63. DOI: 10.1016/j.cemconcomp.2013.09.015
    20. Yang, C.C., Liang, C.H. A modified colorimetric method to determine the chloride profile from the ponding test. Journal of the Chinese Institute of Engineers. 2014. 37(4). Pp. 419–427. DOI: 10.1080/02533839.2013.799948
    21. Baroghel-Bouny, V., Belin, P., Maultzsch, M., Henry, D. AgNO3 spray tests: advantages, weaknesses, and various applications to quantify chloride ingress into concrete. Part 1: Non-steady-state diffusion tests and exposure to natural conditions. Materials and Structures. 2007. 40. Pp. 759–781. DOI: 10.1617/s11527-007-9233-1
    22. Samimi, K., Kamali-Bernard, S., Maghsoudi, A.A., Maghsoudi, M., Siad, H. Influence of pumice and zeolite on compressive strength, transport properties and resistance to chloride penetration of high strength self-compacting concretes. Construction and Building Materials. 2017. 151. Pp. 292–311. DOI: 10.1016/j.conbuildmat.2017.06.071
    23. Kim, M.Y., Yang, E.I., Yi, S.T. Evaluation of chloride penetration characteristics using a colorimetric method in concrete Structures. Proceedings of SMiRT 19. Toronto, 2007. 8 p.
    24. He, F., Shi, C., Yuan, Q., Chen, C., Zheng, K. AgNO3-based colorimetric methods for measurement of chloride penetration in concrete. Construction and Building Materials. 2012. 26(1). Pp. 1–8. DOI: 10.1016/j.conbuildmat.2011.06.003
    25. Tang, L. Guidelines for practical use of methods for testing the resistance of concrete to chloride ingress. Chlortest. Report D23. SP Swedish National Testing and Research Institute, 2005.
    26. Qiang, Y., De-hua, D., Cai-jun, S., Schutter, G.D. Application of silver nitrate colorimetric method to non-steady-state diffusion test. Journal of Central South University. 2012. 19. Pp. 2983–2990. DOI: 10.1007/s11771-012-1367-9
    27. Vosoughi, P., Taylor, P., Najimi, M., Horton, R. Effect of Exposure Conditions and Internal Curing on Pore Water Potential Development in Cement-Based Materials. Transportation Research Record. 2021. 2675(1). Pp. 184–191. DOI: 10.1177/0361198120957319
    28. Chen, J., Jia, J., Zhu, M. Role of supplementary cementitious materials on chloride binding behaviors and corrosion resistance in marine environment. Construction and Building Materials. 2025. 458. Article no. 139724. DOI: 10.1016/j.conbuildmat.2024.139724
    29. Monika, M., Sonal, T. Influence of Supplementary Cementitious Material on Estimated Service Life of Structure in Chloride Environment. Journal of Rehabilitation in Civil Engineering. 2022. 10(2). Pp. 122–133. DOI: 10.22075/jrce.2022.22394.1476
    30. Wilson, W., Gonthier, J.N., Georget, F., Scrivener, K.L. Insights on chemical and physical chloride binding in blended cement pastes. Cement and Concrete Research. 2022. 156. Article no. 106747. DOI: 10.1016/j.cemconres.2022.106747
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Previous articleNext article