Articles by keywords "finite element"

Rectangular flat finite element for modeling the process of crack formation

Structural mechanics
  • Year: 2025
  • Volume: 18
  • Issue: 3
  • 107
  • 2937
  • Pages: 13502-13502

An investigation on the nonlinear dynamic behavior of reinforced concrete shear wall under seismic loading

Structural mechanics
  • Year: 2025
  • Volume: 18
  • Issue: 2
  • 110
  • 3022
  • Pages: 13409-13409

Simplified finite element model for rectangular CFST columns strength calculation under eccentric compression

Structural mechanics
  • Year: 2025
  • Volume: 18
  • Issue: 2
  • 104
  • 3115
  • Pages: 13406-13406

Natural vibrations of buried pipeline section

Grounds and foundations, underground structures
  • Year: 2025
  • Volume: 18
  • Issue: 1
  • 86
  • 3151
  • Pages: 13305-13305

Artificial intelligence models for determining the strength of centrally compressed pipe-concrete columns with square cross-section

Structural mechanics
  • Year: 2024
  • Volume: 17
  • Issue: 6
  • 48
  • 2412
  • Pages: 13008-13008

Response spectra at elevations of station dam equipment installation

Hydraulic engineering
  • Year: 2024
  • Volume: 17
  • Issue: 6
  • 49
  • 1710
  • Pages: 13006-13006

Assessment of two nearby interfering strip footings of different embedment depths in saturated cohesive soils

Grounds and foundations, underground structures
  • Year: 2024
  • Volume: 17
  • Issue: 5
  • 62
  • 2233
  • Pages: 12906-12906

Providing free vibrations and stability of a multi-span beam under temperature changes by selecting the support system

Building constructions, buildings and structures
  • Year: 2024
  • Volume: 17
  • Issue: 4
  • 98
  • 2480
  • Pages: 12810-12810

The beam finite element with five nodal degrees of freedom

Structural mechanics
  • Year: 2024
  • Volume: 17
  • Issue: 4
  • 108
  • 2881
  • Pages: 12802-12802

Three-field FEM for analysis of thin elastic shells

Structural mechanics
  • Year: 2024
  • Volume: 17
  • Issue: 3
  • 66
  • 2839
  • Pages: 12710-12710

The temperature nomogram to predict the maximum temperature in mass concrete

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 2
  • 55
  • 2736
  • Pages: 12605-12605

Dynamic characteristics of a reinforced concrete frame under vibration load conditions

Structural mechanics
  • Year: 2024
  • Volume: 17
  • Issue: 2
  • 74
  • 3275
  • Pages: 12607-12607

Numerical analysis of rainfall-induced slope instability using a reduced-scale model

Grounds and foundations, underground structures
  • Year: 2024
  • Volume: 17
  • Issue: 1
  • 53
  • 2910
  • Pages: 12506-12506

Concrete face rockfill dam located on deformed foundation: stress-strain state

Hydraulic engineering
  • Year: 2023
  • Issue: 8
  • 85
  • 2564
  • Pages: 12402-12402

Digital models for retrospective analysis of the structure of currents in the Neva Bay

Hydraulics and Engineering Hydrology
  • Year: 2023
  • Issue: 8
  • 55
  • 2417
  • Pages: 12411-12411

Beam on a two-parameter elastic foundation: simplified finite element model

Grounds and foundations, underground structures
  • Year: 2023
  • Issue: 5
  • 103
  • 3424
  • Pages: 12107-12107

Triangular prism finite element based on piecewise constant stress approximations

Structural mechanics
  • Year: 2023
  • Issue: 5
  • 65
  • 3151
  • Pages: 12105-12105

Soil-structure interaction: theoretical research, in-situ observations, and practical applications

Grounds and foundations, underground structures
  • Year: 2023
  • Issue: 4
  • 66
  • 2913
  • Pages: 12005-12005

Behavior of timber-timber composite structure connected by inclined screws

Building constructions, buildings and structures
  • Year: 2023
  • Issue: 4
  • 94
  • 3068
  • Pages: 12004-12004

Tank shell stability: refined design schemes

Structural mechanics
  • Year: 2023
  • Issue: 3
  • 81
  • 3680
  • Pages: 11906-11906

Elliptical underground concrete block bridge with minimal weight

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2023
  • Issue: 1
  • 69
  • 2800
  • Pages: 11713-11713

Energy efficiency of underground structures in harsh climatic conditions

Energy efficiency and thermal protection of buildings
  • Year: 2023
  • Issue: 1
  • 79
  • 3271
  • Pages: 11710-11710

Heterogeneous embankment dam under rapid drawdown

Hydraulic engineering
  • Year: 2023
  • Issue: 1
  • 127
  • 3878
  • Pages: 11708-11708

Temperature effects on the design parameters of a geothermal pile

Grounds and foundations, underground structures
  • Year: 2022
  • Issue: 8
  • 98
  • 3447
  • Pages: 11606-11606

Topology design of plane bar systems based on polygonal discretization

Structural mechanics
  • Year: 2022
  • Issue: 7
  • 51
  • 3382
  • Pages: 11508-11508

Stress-strain state of CFRD with a decrease in friction at the face-sidewall contact

Hydraulic engineering
  • Year: 2022
  • Issue: 7
  • 61
  • 3227
  • Pages: 11506-11506

Assessment of crack resistance of ultra-high earth core rockfill dam by pore pressure

Hydraulic engineering
  • Year: 2022
  • Issue: 6
  • 68
  • 3536
  • Pages: 11411-11411

The calculation of the dynamic characteristics of the spillway of the dam

Hydraulic engineering
  • Year: 2022
  • Issue: 5
  • 106
  • 3073
  • Pages: 11312-11312

Physically nonlinear shell deformation based on three-dimensional finite elements

Structural mechanics
  • Year: 2022
  • Issue: 5
  • 49
  • 3490
  • Pages: 11314-11314

Rubber concrete beams under the action of transverse bending

Structural mechanics
  • Year: 2022
  • Issue: 5
  • 92
  • 4500
  • Pages: 11301-11301

Structural performance of corroded RC beams without shear reinforcement

Building constructions, buildings and structures
  • Year: 2022
  • Issue: 4
  • 114
  • 3607
  • Pages: 11211-11211

Telescopic water intake with stilling well

Water supply, sewerage, construction systems of water resources protection
  • Year: 2022
  • Issue: 4
  • 59
  • 3674
  • Pages: 11209-11209

High-strength steel effects on the behavior of special shear walls

Structural mechanics
  • Year: 2022
  • Issue: 3
  • 64
  • 4136
  • Pages: 11102-11102

Structural health monitoring by merging dynamic response data

Structural mechanics
  • Year: 2022
  • Issue: 3
  • 75
  • 4001
  • Pages: 11111-11111

Performance of elastomeric seismic isolators under long-period earthquakes

Structural mechanics
  • Year: 2022
  • Issue: 2
  • 255
  • 4894
  • Pages: 11014-11014

Numerical shear of post-tensioned beams with inverted-U shaped reinforcements

Structural mechanics
  • Year: 2022
  • Issue: 2
  • 85
  • 4277
  • Pages: 11006-11006

Finite element models based on the approximation of discontinuous stress fields

Structural mechanics
  • Year: 2022
  • Issue: 2
  • 76
  • 4449
  • Pages: 11004-11004

Algorithm for building structures optimization based on Lagrangian functions

Structural mechanics
  • Year: 2022
  • Issue: 1
  • 96
  • 4392
  • Pages: 10910-10910

The shear behavior of Anchored CFRP Strengthened RC beams

Structural mechanics
  • Year: 2022
  • Issue: 1
  • 61
  • 4352
  • Pages: 10905-10905

Behavior of CFT steel columns damaged by thermal shock

Structural mechanics
  • Year: 2021
  • Issue: 8
  • 31
  • 3906
  • Pages: 10808-10808

Interaction and control measures of shallow-buried shield twin tunnels with small clear-distance

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2021
  • Issue: 8
  • 129
  • 3787
  • Pages: 10801-10801

Isotropic damage model to simulate failure in reinforced concrete beam

Structural mechanics
  • Year: 2021
  • Issue: 7
  • 57
  • 4148
  • Pages: 10714-10714

Arbitrary quadrangular finite element for plates with shear deformations

Structural mechanics
  • Year: 2021
  • Issue: 7
  • 64
  • 3740
  • Pages: 10707-10707

Algorithm of correcting bimoments in calculations of thin-walled bar systems

Structural mechanics
  • Year: 2021
  • Issue: 7
  • 36
  • 3745
  • Pages: 10706-10706

Methodology for solving parametric optimization problems of steel structures

Structural mechanics
  • Year: 2021
  • Issue: 7
  • 101
  • 4558
  • Pages: 10705-10705

Performance of composite connections strengthened with CFRP laminate

Structural mechanics
  • Year: 2021
  • Issue: 6
  • 95
  • 3713
  • Pages: 10614-10614

The impact of depth on shear behavior of strengthened beams

Structural mechanics
  • Year: 2021
  • Issue: 5
  • 97
  • 4923
  • Pages: 10501-10501

Ultimate load capacity of high-performance fibre-concrete hollow square columns

Building Materials
  • Year: 2021
  • Issue: 4
  • 77
  • 4141
  • Pages: 10412-10412

The location of supports under the monolithic reinforced concrete slabs optimization

Structural mechanics
  • Year: 2021
  • Issue: 4
  • 96
  • 4834
  • Pages: 10404-10404

Elasto-plastic progressive collapse analysis based on the integration of the equations of motion

Structural mechanics
  • Year: 2021
  • Issue: 2
  • 150
  • 4810
  • Pages: 10214-10214

Numerical investigation of truss-shaped braces in eccentrically braced steel frames

Structural mechanics
  • Year: 2021
  • Issue: 2
  • 64
  • 4386
  • Pages: 10208-10208

Performance of two-way hinges in reinforced concrete structures

Structural mechanics
  • Year: 2021
  • Issue: 2
  • 143
  • 5383
  • Pages: 10204-10204

Bearing capacity of eccentrically compressed bisteel columns

Structural mechanics
  • Year: 2021
  • Issue: 2
  • 106
  • 5322
  • Pages: 10201-10201

Strength of concrete columns reinforced with Glass fiber reinforced polymer

Structural mechanics
  • Year: 2021
  • Issue: 1
  • 151
  • 5325
  • Pages: 10108-10108

Basalt fiber reinforced expanded clay concrete for building structures

Building Materials
  • Year: 2021
  • Issue: 1
  • 165
  • 5019
  • Pages: 10107-10107

Behavior of light-gauge steel beams filled with recycled concrete

Structural mechanics
  • Year: 2021
  • Issue: 1
  • 274
  • 7011
  • Pages: 10102-10102

Frictional contact problem in building constructions analysis

Structural mechanics
  • Year: 2020
  • Issue: 8
  • 108
  • 4685
  • Pages: 10001-10001

Flange connections with high-strength bolts with technological heredity of bolts

Structural mechanics
  • Year: 2020
  • Issue: 7
  • 106
  • 4839
  • Pages: 9912-9912

Behavior of B-C connections damaged by thermal shock

Structural mechanics
  • Year: 2020
  • Issue: 7
  • 46
  • 4039
  • Pages: 9910-9910

Earth pressure reduction on retaining walls using EPS geofoam

Structural mechanics
  • Year: 2020
  • Issue: 7
  • 148
  • 5198
  • Pages: 9904-9904

Numerical simulation of concrete dam during heavy rain

Hydraulic engineering
  • Year: 2020
  • Issue: 7
  • 125
  • 4319
  • Pages: 9903-9903

Improved gradient projection method for parametric optimisation of bar structures

Structural mechanics
  • Year: 2020
  • Issue: 6
  • 64
  • 4110
  • Pages: 9812-9812

The shear behavior of CFRP strengthened RC beams

Structural mechanics
  • Year: 2020
  • Issue: 6
  • 70
  • 3952
  • Pages: 9810-9810

Stress-strain state of Insulated Glass Unit in structural glazing systems

Structural mechanics
  • Year: 2020
  • Issue: 6
  • 86
  • 4969
  • Pages: 9808-9808

Behavior of CFRP strengthened columns damaged by thermal shock

Structural mechanics
  • Year: 2020
  • Issue: 5
  • 55
  • 4035
  • Pages: 9708-9708

Stress-strain state of fiber cement cladding within curtain wall system

Building Materials
  • Year: 2020
  • Issue: 5
  • 98
  • 4112
  • Pages: 9709-9709

Method of plates stability analysis based on the moments approximations

Structural mechanics
  • Year: 2020
  • Issue: 3
  • 78
  • 4801
  • Pages: 90-103

Behavior of strengthened concrete beams damaged by thermal shock

Building constructions, buildings and structures
  • Year: 2020
  • Issue: 2
  • 188
  • 4806
  • Pages: 93-107

Computational modeling of yielding octagonal connection for concentrically braced frames

Structural mechanics
  • Year: 2020
  • Issue: 2
  • 148
  • 5073
  • Pages: 31-53

Finite element modeling of cold-formed steel deck in bending

Building constructions, buildings and structures
  • Year: 2020
  • Issue: 2
  • 190
  • 4356
  • Pages: 129-144

An improved membrane element for high-rise building with shear walls

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 7
  • 93
  • 4422
  • Pages: 121-128

Equilibrium finite elements for plane problems of the elasticity theory

Structural mechanics
  • Year: 2019
  • Issue: 7
  • 99
  • 5035
  • Pages: 80-97

Risk of surface blast load on pile foundations

Grounds and foundations, underground structures
  • Year: 2019
  • Issue: 6
  • 191
  • 5318
  • Pages: 47-61

Modelling of contact interaction of structures with the base under dynamic loading

Structural mechanics
  • Year: 2019
  • Issue: 5
  • 133
  • 5120
  • Pages: 167-178

Mixed finite-element method in V.I. Slivker’s semi-shear thin-walled bar theory

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 5
  • 170
  • 4984
  • Pages: 79-93

Finite element model of Reisner’s plates in stresses

Structural mechanics
  • Year: 2019
  • Issue: 5
  • 92
  • 5247
  • Pages: 61-78

The semi-shear theory of V.I. Slivker for the stability problems of thin-walled bars

Structural mechanics
  • Year: 2019
  • Issue: 3
  • 139
  • 5590
  • Pages: 66-79

Bearing capacity of fastener steel tube full hall scaffolds

Structural mechanics
  • Year: 2019
  • Issue: 3
  • 66
  • 5022
  • Pages: 35-45

The effect of perforations on the deformability of welded beam with corrugated webs

Structural mechanics
  • Year: 2019
  • Issue: 3
  • 125
  • 5271
  • Pages: 18-34

Monolithic constructions made of light nanoconcrete by the example of 5-story multilayer parking

Building constructions, buildings and structures
  • Year: 2010
  • Issue: 5
  • 14
  • 4049
  • Pages: 12-15

Designing of steel frameworks from thin-walled cold-formed profiles in SCAD Office

Technology and organization of construction
  • Year: 2010
  • Issue: 8
  • 39
  • 4128
  • Pages: 38-46

Application of shell and solid elements in the analysis of building steel designs with software SCAD and Nastran accounting for geometrical and physical nonlinearity

Structural mechanics
  • Year: 2011
  • Issue: 3
  • 25
  • 4297
  • Pages: 4-20

Substantive provisions of Numeral-analytical boundary elements method

Structural mechanics
  • Year: 2011
  • Issue: 4
  • 15
  • 4626
  • Pages: 33-39

Calculation algorithm of steel-reinforced concrete water passages

Hydraulic engineering
  • Year: 2011
  • Issue: 6
  • 22
  • 4185
  • Pages: 41-49

Station Adler railway terminal structures modelling taking into account seismic base isolation

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2012
  • Issue: 1
  • 19
  • 3904
  • Pages: 22-30

Finite element modeling of fracture processes and estimation of durability of the road bridge with account of corrosion damages

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 7
  • 21
  • 4054
  • Pages: 32-42

About analysis of large problems of structural mechanics on multi-core computers

Structural mechanics
  • Year: 2013
  • Issue: 5
  • 23
  • 4466
  • Pages: 116-124

Simulation of degradation of bond between reinforcing bar and concrete. Part 1. Models with account of the discontinuity

Structural mechanics
  • Year: 2013
  • Issue: 5
  • 78
  • 4872
  • Pages: 86-99

The effect of construction joints and cracks on the stress-strain state of the arch-gravity dam

Hydraulic engineering
  • Year: 2013
  • Issue: 5
  • 17
  • 3777
  • Pages: 76-85

Evolutionary optimization of steel trusses with the nodal joints of rods

Structural mechanics
  • Year: 2013
  • Issue: 5
  • 43
  • 6219
  • Pages: 28-37

Stress finite element models for determining the frequencies of free oscillations

Structural mechanics
  • Year: 2016
  • Issue: 7
  • 35
  • 4740
  • Pages: 39-54

The Simulation of Bond Fracture between Reinforcing Bars and concrete. Part 2. Models without taking the Bond Discontinuity into account

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 1
  • 39
  • 4692
  • Pages: 23-40

Ice induced vibrations of offshore structures

Hydraulic engineering
  • Year: 2014
  • Issue: 4
  • 45
  • 4551
  • Pages: 72-88

Tubular composite columns in a non-symmetrical fire

Fire safety in construction
  • Year: 2014
  • Issue: 5
  • 21
  • 3882
  • Pages: 107-120

Influence of structural parameters of the masonry on effective elastic properties and strength

Structural mechanics
  • Year: 2014
  • Issue: 5
  • 18
  • 4135
  • Pages: 95-106

Stress-strain behavior investigation of friction grip bolts in flange joints of trusses

Structural mechanics
  • Year: 2014
  • Issue: 5
  • 27
  • 4582
  • Pages: 54-62

Quadrilateral shell finite element for analysis of thin-walled reinforced concrete structures

Building constructions, buildings and structures
  • Year: 2014
  • Issue: 5
  • 17
  • 4027
  • Pages: 27-36

Buildings with suspended structures in seismic areas

Building constructions, buildings and structures
  • Year: 2016
  • Issue: 5
  • 66
  • 4913
  • Pages: 17-26

Analysis of local stability of the rectangular tubes filled with concrete

Building constructions, buildings and structures
  • Year: 2016
  • Issue: 4
  • 40
  • 4281
  • Pages: 59-68

Surrogate modeling for initial rotational stiffness of welded tubular joints

Structural mechanics
  • Year: 2016
  • Issue: 3
  • 50
  • 5096
  • Pages: 53-76

Calculation method of bending plates with assuming shear deformations

Structural mechanics
  • Year: 2019
  • Issue: 1
  • 68
  • 4911
  • Pages: 107-122

Combined Method of 3d Analysis for Underground Structures in View of Surrounding Infinite Homogeneous and Inhomogeneous Medium

Grounds and foundations, underground structures
  • Year: 2016
  • Issue: 2
  • 22
  • 4463
  • Pages: 83-91

Method of initial functions in model of compression linearly deformable layered foundation under normal local load

Structural mechanics
  • Year: 2015
  • Issue: 1
  • 26
  • 4446
  • Pages: 91-96

Modeling of porous material fracture

Building Materials
  • Year: 2017
  • Issue: 1
  • 43
  • 5524
  • Pages: 3-22

The functional of additional energy for stability analysis of spatial rod systems

Structural mechanics
  • Year: 2017
  • Issue: 2
  • 31
  • 4381
  • Pages: 18-32

Modeling of indentation and slip of wedge punch

Structural mechanics
  • Year: 2017
  • Issue: 6
  • 24
  • 4555
  • Pages: 78-101

Flat rod systems: optimization with overall stability control

Structural mechanics
  • Year: 2017
  • Issue: 8
  • 36
  • 4896
  • Pages: 181-192

Finite element analysis of crane secondary truss

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 1
  • 61
  • 4729
  • Pages: 68-89

Finite element models in stresses for plane elasticity problems

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 1
  • 39
  • 4644
  • Pages: 23-37

Adaptive finite-element models in structural health monitoring systems

Technology and organization of construction
  • Year: 2018
  • Issue: 2
  • 76
  • 4308
  • Pages: 169-178

Refined finite element of rods for stability calculation

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 3
  • 27
  • 4220
  • Pages: 54-65

Cold-formed RHS T joints with initial geometrical imperfections

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 4
  • 48
  • 5225
  • Pages: 81-94

Influence of stiffness of node on stability and strength of thin-walled structure

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 4
  • 63
  • 4623
  • Pages: 48-61

Finite element models in stresses for bending plates

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 6
  • 35
  • 4365
  • Pages: 170-190

Optimization of hybrid I-beams using modified particle swarm method

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 7
  • 33
  • 4212
  • Pages: 175-185

Stress-strain behavior of welded joints in railway girders

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2018
  • Issue: 8
  • 47
  • 3931
  • Pages: 119-129