Articles by keywords "frame"

Reliability studies of the frame of the C1 shipping opening

Hydraulic engineering
  • Year: 2025
  • Volume: 18
  • Issue: 8
  • 11
  • 391
  • Pages: 14008-14008

Dynamic characteristics of a reinforced concrete frame under vibration load conditions

Structural mechanics
  • Year: 2024
  • Volume: 17
  • Issue: 2
  • 81
  • 4338
  • Pages: 12607-12607

Lateral bracing and steel shear wall integration in steel high-rises

Building constructions, buildings and structures
  • Year: 2023
  • Issue: 7
  • 256
  • 4571
  • Pages: 12309-12309

Bearing capacity of frame-gantry pile foundations

Grounds and foundations, underground structures
  • Year: 2023
  • Issue: 6
  • 57
  • 3842
  • Pages: 12207-12207

Calculation method for sound insulation of lightweight enclosures at low frequencies

Building constructions, buildings and structures
  • Year: 2023
  • Issue: 5
  • 77
  • 3953
  • Pages: 12103-12103

Effect of uncertainties of shear wall on reliability of rehabilitated structure

Structural mechanics
  • Year: 2023
  • Issue: 1
  • 117
  • 4815
  • Pages: 11701-11701

Seismic damage mechanism of weak beam-column joint frames

Building constructions, buildings and structures
  • Year: 2022
  • Issue: 8
  • 137
  • 4807
  • Pages: 11601-11601

Topology design of plane bar systems based on polygonal discretization

Structural mechanics
  • Year: 2022
  • Issue: 7
  • 51
  • 4263
  • Pages: 11508-11508

Algorithm of correcting bimoments in calculations of thin-walled bar systems

Structural mechanics
  • Year: 2021
  • Issue: 7
  • 37
  • 4476
  • Pages: 10706-10706

Mechanical safety of reinforced concrete frames under complex emergency actions

Structural mechanics
  • Year: 2021
  • Issue: 3
  • 125
  • 5751
  • Pages: 10306-10306

Bending torsion in Γ-shaped rigid and warping hinge joints

Structural mechanics
  • Year: 2020
  • Issue: 7
  • 89
  • 4866
  • Pages: 9909-9909

Computational modeling of yielding octagonal connection for concentrically braced frames

Structural mechanics
  • Year: 2020
  • Issue: 2
  • 150
  • 6032
  • Pages: 31-53

Failure simulation of a RC multi-storey building frame with prestressed girders

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 8
  • 230
  • 6057
  • Pages: 155-162

Timber frame buildings with efficient junction designs for earthquake-prone areas

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 8
  • 188
  • 6141
  • Pages: 84-95

Shear lag phenomenon in the tubular systems with outriggers and belt trusses

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 2
  • 99
  • 5221
  • Pages: 105-118

Protection of frame buildings from progressive collapse

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 3
  • 112
  • 4884
  • Pages: 38-41

Non-nogging prestressed building frame with flat-slab deck

Building constructions, buildings and structures
  • Year: 2010
  • Issue: 3
  • 27
  • 4439
  • Pages: 52-55

About the quality and longevity of facing of laminose stone walls

Building Materials
  • Year: 2011
  • Issue: 2
  • 17
  • 4635
  • Pages: 42-47

About stability analysis of elastic frames

Structural mechanics
  • Year: 2012
  • Issue: 1
  • 20
  • 4822
  • Pages: 74-78

Frame systems used in enclosure structure in construction from monolithic autoclaved aerated concrete

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 1
  • 14
  • 4237
  • Pages: 13-16

Towards the anchors behavior in multilayer building envelope with face brick layer

Building constructions, buildings and structures
  • Year: 2013
  • Issue: 1
  • 35
  • 5133
  • Pages: 3-11

Features of the calculation and installation of buildings with internal framework

Building constructions, buildings and structures
  • Year: 2008
  • Issue: 2
  • 20
  • 4227
  • Pages: 17-26

Joint action of masonry filling and monolithic reinforced concrete frame

Structural mechanics
  • Year: 2013
  • Issue: 5
  • 24
  • 5087
  • Pages: 20-27

Non-uniform torsion of thin-walled open-section multi-span beams

Structural mechanics
  • Year: 2016
  • Issue: 7
  • 66
  • 5919
  • Pages: 55-69

Optimization of frame structures with possibility оf emergency actions

Structural mechanics
  • Year: 2013
  • Issue: 9
  • 41
  • 5518
  • Pages: 23-29

Wind load resistance of multilayer walls supported floor-by-floor with a facing layer

Structural mechanics
  • Year: 2015
  • Issue: 8
  • 33
  • 7319
  • Pages: 38-43

The damage of a stone facing layer at the junction with reinforced concrete floors

Monitoring and testing of buildings and structures
  • Year: 2015
  • Issue: 8
  • 35
  • 5366
  • Pages: 30-37

The stiffness of rigid joints of beam with hollow section column

Structural mechanics
  • Year: 2016
  • Issue: 4
  • 114
  • 6930
  • Pages: 40-51

Evaluation of installation efforts in metal coatings, allowing for assembly process

Structural mechanics
  • Year: 2015
  • Issue: 4
  • 12
  • 5193
  • Pages: 28-37

Prospects of metal as a construction material

Building constructions, buildings and structures
  • Year: 2015
  • Issue: 2
  • 40
  • 5074
  • Pages: 4-5

Optimal design of 3d frame structures taking into account the stress and multiple natural frequency constraints

Structural mechanics
  • Year: 2016
  • Issue: 1
  • 37
  • 5738
  • Pages: 74-81

Evaluation methods of asphalt pavement service life

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2017
  • Issue: 2
  • 111
  • 5018
  • Pages: 42-56

Optimization of flat steel frame and foundation posts system

Grounds and foundations, underground structures
  • Year: 2016
  • Issue: 1
  • 63
  • 5767
  • Pages: 14-24

Semi-rigid steel beam-to-column connections

Structural mechanics
  • Year: 2017
  • Issue: 5
  • 132
  • 6013
  • Pages: 25-39

Fire design methods for structures with timber framework

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 1
  • 153
  • 6355
  • Pages: 92-106

Heat loss through the window frames of buildings

Energy efficiency and thermal protection of buildings
  • Year: 2019
  • Issue: 1
  • 176
  • 6428
  • Pages: 3-14

Technical normalization of working processes in construction based on spatial-temporal modeling

Technology and organization of construction
  • Year: 2017
  • Issue: 8
  • 59
  • 4587
  • Pages: 84-97

Refined methods for calculating and designing engineering structures

Technology and organization of construction
  • Year: 2018
  • Issue: 2
  • 33
  • 4462
  • Pages: 101-115

Survivability criteria for reinforced concrete frame at loss of stability

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 4
  • 84
  • 5290
  • Pages: 73-80

Evolutionary optimization of prestressed steel frames

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 5
  • 41
  • 5056
  • Pages: 32-42

Analytical calculation of the frame with an arbitrary number of panels

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 6
  • 24
  • 4697
  • Pages: 127-135

Probabilistic seismic assessment of concrete frame with mass irregularity

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 6
  • 48
  • 4656
  • Pages: 49-58