Articles by keywords "opt"

Tuned mass damper for reduction seismic and wind loads

Building constructions, buildings and structures
  • Year: 2024
  • Volume: 17
  • Issue: 5
  • 67
  • 1045
  • Pages: 12904-12904

Providing free vibrations and stability of a multi-span beam under temperature changes by selecting the support system

Building constructions, buildings and structures
  • Year: 2024
  • Volume: 17
  • Issue: 4
  • 94
  • 1222
  • Pages: 12810-12810

Enhancing lightweight concrete strength through modified zeolite-alkaline porous aggregate: composition optimization and structural application

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 1
  • 103
  • 1884
  • Pages: 12507-12507

Optimum space frames with rectangular plans

Structural mechanics
  • Year: 2023
  • Issue: 8
  • 38
  • 1495
  • Pages: 12408-12408

Fiber optics based system of monitoring load-bearing building structures

Structural mechanics
  • Year: 2023
  • Issue: 7
  • 258
  • 2215
  • Pages: 12301-12301

Elliptical underground concrete block bridge with minimal weight

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2023
  • Issue: 1
  • 67
  • 1807
  • Pages: 11713-11713

Structure and properties of cement systems with additives of calcined clay and carbonate rocks

Building Materials
  • Year: 2022
  • Issue: 8
  • 101
  • 2328
  • Pages: 11602-11602

Compressive strength prediction model of lightweight high-strength concrete

Structural mechanics
  • Year: 2022
  • Issue: 7
  • 92
  • 2163
  • Pages: 11512-11512

Topology design of plane bar systems based on polygonal discretization

Structural mechanics
  • Year: 2022
  • Issue: 7
  • 47
  • 1849
  • Pages: 11508-11508

Comprehensive assessment for optimal wind energy use in cottage construction

Energy efficiency and thermal protection of buildings
  • Year: 2022
  • Issue: 6
  • 78
  • 2051
  • Pages: 11414-11414

Functional indium oxide-based thin-film coatings with variable light transmission

Building Materials
  • Year: 2022
  • Issue: 6
  • 51
  • 1961
  • Pages: 11410-11410

Fluorоanhydrite based composites with the thermoplastic additive

Building Materials
  • Year: 2022
  • Issue: 4
  • 59
  • 2094
  • Pages: 11210-11210

Mechanical properties of ceramic powder based geopolymer mortars

Building Materials
  • Year: 2022
  • Issue: 4
  • 89
  • 2367
  • Pages: 11207-11207

Fine-grained cement-ash concrete for 3D-printing

Building Materials
  • Year: 2022
  • Issue: 4
  • 70
  • 2322
  • Pages: 11203-11203

Mooring system optimization for marine floating hydrotechnical structures

Hydraulic engineering
  • Year: 2022
  • Issue: 3
  • 91
  • 2407
  • Pages: 11112-11112

Target reliability of alternative fundamental combinations in Eurocode EN1990

Building constructions, buildings and structures
  • Year: 2022
  • Issue: 1
  • 73
  • 3111
  • Pages: 10912-10912

Algorithm for building structures optimization based on Lagrangian functions

Structural mechanics
  • Year: 2022
  • Issue: 1
  • 94
  • 2883
  • Pages: 10910-10910

Strength of earth dams considering elastic-plastic properties of soil

Hydraulic engineering
  • Year: 2021
  • Issue: 8
  • 68
  • 2298
  • Pages: 10813-10813

Methodology for solving parametric optimization problems of steel structures

Structural mechanics
  • Year: 2021
  • Issue: 7
  • 100
  • 2831
  • Pages: 10705-10705

The dependence of the gathering characteristics of nanocarbon cement on the parameters of its production process

Building Materials
  • Year: 2021
  • Issue: 6
  • 41
  • 2122
  • Pages: 10615-10615

Determination of the multicomponent lightweight mixture optimal composition

Building Materials
  • Year: 2021
  • Issue: 4
  • 40
  • 2392
  • Pages: 10411-10411

The location of supports under the monolithic reinforced concrete slabs optimization

Structural mechanics
  • Year: 2021
  • Issue: 4
  • 96
  • 3115
  • Pages: 10404-10404

Modeling the influence of input factors on foam concrete properties

Building Materials
  • Year: 2021
  • Issue: 3
  • 112
  • 2800
  • Pages: 10311-10310

Bending of stiffened plates considering different stiffeners orientations

Structural mechanics
  • Year: 2021
  • Issue: 3
  • 80
  • 2440
  • Pages: 10310-10310

Improved gradient projection method for parametric optimisation of bar structures

Structural mechanics
  • Year: 2020
  • Issue: 6
  • 63
  • 2670
  • Pages: 9812-9812

Stress-strain state of Insulated Glass Unit in structural glazing systems

Structural mechanics
  • Year: 2020
  • Issue: 6
  • 86
  • 3399
  • Pages: 9808-9808

Antiskid prediction model for cement pavements in seasonal frost regions

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2020
  • Issue: 6
  • 84
  • 2985
  • Pages: 9807-9807

Optimisation of steel trusses with a choice of multi-stage prestressing conditions

Structural mechanics
  • Year: 2020
  • Issue: 5
  • 71
  • 2923
  • Pages: 9705-9705

Seismic design philosophy of special steel plate shear walls

Structural mechanics
  • Year: 2020
  • Issue: 3
  • 197
  • 3390
  • Pages: 3-18

Optimization of steel beam structures for frame buildings subject to their safety requirements

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 7
  • 240
  • 4279
  • Pages: 3-15

Technological optimization of temperature efficiency of heat recoverers with intremediate heat carrier

Energy efficiency and thermal protection of buildings
  • Year: 2011
  • Issue: 1
  • 19
  • 2760
  • Pages: 34-36

Static calculation and analysis of spatial rod system

Structural mechanics
  • Year: 2011
  • Issue: 6
  • 29
  • 2986
  • Pages: 28-34

Building side area minimization at the expense of optimization the schedule of movement of workers

Technology and organization of construction
  • Year: 2011
  • Issue: 7
  • 23
  • 2739
  • Pages: 76-81

Theoretical and experimental validation of the air changes in industrial ventilation optimization method

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2012
  • Issue: 2
  • 44
  • 3033
  • Pages: 32-38

Systematization and generalization of local exhaust devices characteristics - the basis for engineering design techniques of effective industrial ventilation

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2012
  • Issue: 6
  • 26
  • 2939
  • Pages: 54-59

Possible applications of clinoptilolites for natural water purification

Hydraulic engineering
  • Year: 2013
  • Issue: 2
  • 36
  • 3521
  • Pages: 81-88

Addition to the method of dimensional analysis in hydraulic problems

Hydraulics and Engineering Hydrology
  • Year: 2013
  • Issue: 2
  • 12
  • 2996
  • Pages: 41-47

A hydraulically optimum ventilated gap

Building constructions, buildings and structures
  • Year: 2013
  • Issue: 2
  • 10
  • 2958
  • Pages: 35-40

Integrated characteristics of thermogravitational convection in the air layer of ventilated facades

Energy efficiency and thermal protection of buildings
  • Year: 2013
  • Issue: 2
  • 9
  • 3111
  • Pages: 25-34

Multiparameter structure optimization of the cellular silicate concrete

Building Materials
  • Year: 2013
  • Issue: 3
  • 6
  • 2889
  • Pages: 15-23

Calculating the main canals

Hydraulics and Engineering Hydrology
  • Year: 2013
  • Issue: 4
  • 22
  • 3697
  • Pages: 83-93

Determination of optimal damping parameters for seismic isolation systems

Building constructions, buildings and structures
  • Year: 2013
  • Issue: 5
  • 29
  • 3447
  • Pages: 107-115

Evolutionary optimization of steel trusses with the nodal joints of rods

Structural mechanics
  • Year: 2013
  • Issue: 5
  • 43
  • 4798
  • Pages: 28-37

Self-organizing numerical models of transient processes in water supply hydraulic structures of energy industries

Hydraulics and Engineering Hydrology
  • Year: 2013
  • Issue: 6
  • 6
  • 3075
  • Pages: 50-61

The diffuser design of ventilated facades

Energy efficiency and thermal protection of buildings
  • Year: 2013
  • Issue: 8
  • 16
  • 3266
  • Pages: 38-45

Overall instability and optimization of bar structures with random defects in case of constraints on faultless operation probability

Structural mechanics
  • Year: 2013
  • Issue: 9
  • 14
  • 3054
  • Pages: 30-41

Optimization of frame structures with possibility оf emergency actions

Structural mechanics
  • Year: 2013
  • Issue: 9
  • 37
  • 3313
  • Pages: 23-29

Optimized structure of ventilated facades

Energy efficiency and thermal protection of buildings
  • Year: 2014
  • Issue: 6
  • 50
  • 3480
  • Pages: 53-66

Calculation of optimized methods of the river underwater pipeline backfill with the use of APMWinMachine 9.7

Structural mechanics
  • Year: 2016
  • Issue: 5
  • 9
  • 3317
  • Pages: 42-66

Optimal design of 3d frame structures taking into account the stress and multiple natural frequency constraints

Structural mechanics
  • Year: 2016
  • Issue: 1
  • 36
  • 3632
  • Pages: 74-81

The method of calculation for the period of checking utility systems

Technology and organization of construction
  • Year: 2017
  • Issue: 2
  • 31
  • 3248
  • Pages: 72-83

Optimization of flat steel frame and foundation posts system

Grounds and foundations, underground structures
  • Year: 2016
  • Issue: 1
  • 61
  • 4014
  • Pages: 14-24

Fiber fine-grained concretes with polyfunctional modifying additives

Building Materials
  • Year: 2017
  • Issue: 4
  • 43
  • 3852
  • Pages: 73-83

Selection criteria of space planning and structural solutions of low-rise buildings

Technology and organization of construction
  • Year: 2017
  • Issue: 7
  • 58
  • 3383
  • Pages: 84-93

Flat rod systems: optimization with overall stability control

Structural mechanics
  • Year: 2017
  • Issue: 8
  • 35
  • 3371
  • Pages: 181-192

Dynamic programming in optimization of comprehensive housing stock modernization

Architecture and Urban planning
  • Year: 2017
  • Issue: 8
  • 34
  • 2814
  • Pages: 3-19

Seismic design optimization considering base-isolation system

Technology and organization of construction
  • Year: 2018
  • Issue: 4
  • 48
  • 3354
  • Pages: 138-150

Evolutionary optimization of prestressed steel frames

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 5
  • 37
  • 3108
  • Pages: 32-42

Method of calculating the optimal sand content in normal-weight concrete

Building Materials
  • Year: 2018
  • Issue: 7
  • 31
  • 2627
  • Pages: 186-197

Optimization of hybrid I-beams using modified particle swarm method

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 7
  • 32
  • 2996
  • Pages: 175-185

Сообщить автору об опечатке:

Адрес страницы с ошибкой:

Текст с ошибкой:

Ваш комментарий или корректная версия: