Publication schedule
  • №1 February 2023
  • №2 April 2023
  • №3 May 2023
  • №4 July 2023

Articles by keywords "element"

Temperature effects on the design parameters of a geothermal pile

Grounds and foundations, underground structures
  • Year: 2022
  • Issue: 8
  • 56
  • 230
  • Pages: 11606-11606

Topology design of plane bar systems based on polygonal discretization

Structural mechanics
  • Year: 2022
  • Issue: 7
  • 21
  • 225
  • Pages: 11508-11508

Stress-strain state of CFRD with a decrease in friction at the face-sidewall contact

Hydraulic engineering
  • Year: 2022
  • Issue: 7
  • 23
  • 238
  • Pages: 11506-11506

Assessment of crack resistance of ultra-high earth core rockfill dam by pore pressure

Hydraulic engineering
  • Year: 2022
  • Issue: 6
  • 29
  • 348
  • Pages: 11411-11411

Bolted connections stiffness of steel trusses for bridge superstructures

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2022
  • Issue: 6
  • 33
  • 333
  • Pages: 11409-11409

The calculation of the dynamic characteristics of the spillway of the dam

Hydraulic engineering
  • Year: 2022
  • Issue: 5
  • 42
  • 422
  • Pages: 11312-11312

Physically nonlinear shell deformation based on three-dimensional finite elements

Structural mechanics
  • Year: 2022
  • Issue: 5
  • 31
  • 402
  • Pages: 11314-11314

Rubber concrete beams under the action of transverse bending

Structural mechanics
  • Year: 2022
  • Issue: 5
  • 54
  • 507
  • Pages: 11301-11301

Structural performance of corroded RC beams without shear reinforcement

Building constructions, buildings and structures
  • Year: 2022
  • Issue: 4
  • 60
  • 604
  • Pages: 11211-11211

Telescopic water intake with stilling well

Water supply, sewerage, construction systems of water resources protection
  • Year: 2022
  • Issue: 4
  • 24
  • 451
  • Pages: 11209-11209

High-strength steel effects on the behavior of special shear walls

Structural mechanics
  • Year: 2022
  • Issue: 3
  • 38
  • 511
  • Pages: 11102-11102

Structural health monitoring by merging dynamic response data

Structural mechanics
  • Year: 2022
  • Issue: 3
  • 41
  • 571
  • Pages: 11111-11111

Performance of elastomeric seismic isolators under long-period earthquakes

Structural mechanics
  • Year: 2022
  • Issue: 2
  • 75
  • 790
  • Pages: 11014-11014

Numerical shear of post-tensioned beams with inverted-U shaped reinforcements

Structural mechanics
  • Year: 2022
  • Issue: 2
  • 72
  • 825
  • Pages: 11006-11006

Finite element models based on the approximation of discontinuous stress fields

Structural mechanics
  • Year: 2022
  • Issue: 2
  • 50
  • 562
  • Pages: 11004-11004

Algorithm for building structures optimization based on Lagrangian functions

Structural mechanics
  • Year: 2022
  • Issue: 1
  • 64
  • 870
  • Pages: 10910-10910

The shear behavior of Anchored CFRP Strengthened RC beams

Structural mechanics
  • Year: 2022
  • Issue: 1
  • 52
  • 795
  • Pages: 10905-10905

Behavior of CFT steel columns damaged by thermal shock

Structural mechanics
  • Year: 2021
  • Issue: 8
  • 23
  • 619
  • Pages: 10808-10808

Interaction and control measures of shallow-buried shield twin tunnels with small clear-distance

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2021
  • Issue: 8
  • 98
  • 930
  • Pages: 10801-10801

Isotropic damage model to simulate failure in reinforced concrete beam

Structural mechanics
  • Year: 2021
  • Issue: 7
  • 35
  • 1113
  • Pages: 10714-10714

Arbitrary quadrangular finite element for plates with shear deformations

Structural mechanics
  • Year: 2021
  • Issue: 7
  • 40
  • 687
  • Pages: 10707-10707

Algorithm of correcting bimoments in calculations of thin-walled bar systems

Structural mechanics
  • Year: 2021
  • Issue: 7
  • 31
  • 671
  • Pages: 10706-10706

Methodology for solving parametric optimization problems of steel structures

Structural mechanics
  • Year: 2021
  • Issue: 7
  • 75
  • 866
  • Pages: 10705-10705

Performance of composite connections strengthened with CFRP laminate

Structural mechanics
  • Year: 2021
  • Issue: 6
  • 86
  • 833
  • Pages: 10614-10614

The impact of depth on shear behavior of strengthened beams

Structural mechanics
  • Year: 2021
  • Issue: 5
  • 88
  • 1566
  • Pages: 10501-10501

Ultimate load capacity of high-performance fibre-concrete hollow square columns

Building Materials
  • Year: 2021
  • Issue: 4
  • 65
  • 1329
  • Pages: 10412-10412

The location of supports under the monolithic reinforced concrete slabs optimization

Structural mechanics
  • Year: 2021
  • Issue: 4
  • 74
  • 1080
  • Pages: 10404-10404

Elasto-plastic progressive collapse analysis based on the integration of the equations of motion

Structural mechanics
  • Year: 2021
  • Issue: 2
  • 108
  • 1409
  • Pages: 10214-10214

Tendencies in developing structural designs of non-soil seepage-control structures of embankment dams

Hydraulic engineering
  • Year: 2021
  • Issue: 2
  • 62
  • 1130
  • Pages: 10212-10212

Numerical investigation of truss-shaped braces in eccentrically braced steel frames

Structural mechanics
  • Year: 2021
  • Issue: 2
  • 51
  • 1140
  • Pages: 10208-10208

Performance of two-way hinges in reinforced concrete structures

Structural mechanics
  • Year: 2021
  • Issue: 2
  • 117
  • 1747
  • Pages: 10204-10204

Bearing capacity of eccentrically compressed bisteel columns

Structural mechanics
  • Year: 2021
  • Issue: 2
  • 96
  • 1348
  • Pages: 10201-10201

Strength of concrete columns reinforced with Glass fiber reinforced polymer

Structural mechanics
  • Year: 2021
  • Issue: 1
  • 108
  • 1646
  • Pages: 10108-10108

Basalt fiber reinforced expanded clay concrete for building structures

Building Materials
  • Year: 2021
  • Issue: 1
  • 128
  • 1731
  • Pages: 10107-10107

Behavior of light-gauge steel beams filled with recycled concrete

Structural mechanics
  • Year: 2021
  • Issue: 1
  • 250
  • 3516
  • Pages: 10102-10102

Frictional contact problem in building constructions analysis

Structural mechanics
  • Year: 2020
  • Issue: 8
  • 95
  • 1378
  • Pages: 10001-10001

Deformations during drying of wooden corner elements of I-beams

Structural mechanics
  • Year: 2020
  • Issue: 7
  • 43
  • 1146
  • Pages: 9913-9913

Flange connections with high-strength bolts with technological heredity of bolts

Structural mechanics
  • Year: 2020
  • Issue: 7
  • 77
  • 1526
  • Pages: 9912-9912

Behavior of B-C connections damaged by thermal shock

Structural mechanics
  • Year: 2020
  • Issue: 7
  • 30
  • 1073
  • Pages: 9910-9910

Earth pressure reduction on retaining walls using EPS geofoam

Structural mechanics
  • Year: 2020
  • Issue: 7
  • 113
  • 1815
  • Pages: 9904-9904

Numerical simulation of concrete dam during heavy rain

Hydraulic engineering
  • Year: 2020
  • Issue: 7
  • 93
  • 1462
  • Pages: 9903-9903

Improved gradient projection method for parametric optimisation of bar structures

Structural mechanics
  • Year: 2020
  • Issue: 6
  • 56
  • 1246
  • Pages: 9812-9812

The shear behavior of CFRP strengthened RC beams

Structural mechanics
  • Year: 2020
  • Issue: 6
  • 54
  • 1108
  • Pages: 9810-9810

Stress-strain state of Insulated Glass Unit in structural glazing systems

Structural mechanics
  • Year: 2020
  • Issue: 6
  • 59
  • 1507
  • Pages: 9808-9808

Behavior of CFRP strengthened columns damaged by thermal shock

Structural mechanics
  • Year: 2020
  • Issue: 5
  • 41
  • 1168
  • Pages: 9708-9708

Stress-strain state of fiber cement cladding within curtain wall system

Building Materials
  • Year: 2020
  • Issue: 5
  • 65
  • 1445
  • Pages: 9709-9709

Method of plates stability analysis based on the moments approximations

Structural mechanics
  • Year: 2020
  • Issue: 3
  • 72
  • 1636
  • Pages: 90-103

Behavior of strengthened concrete beams damaged by thermal shock

Building constructions, buildings and structures
  • Year: 2020
  • Issue: 2
  • 169
  • 1799
  • Pages: 93-107

Computational modeling of yielding octagonal connection for concentrically braced frames

Structural mechanics
  • Year: 2020
  • Issue: 2
  • 138
  • 1777
  • Pages: 31-53

Finite element modeling of cold-formed steel deck in bending

Building constructions, buildings and structures
  • Year: 2020
  • Issue: 2
  • 157
  • 1636
  • Pages: 129-144

An improved membrane element for high-rise building with shear walls

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 7
  • 81
  • 1673
  • Pages: 121-128

Equilibrium finite elements for plane problems of the elasticity theory

Structural mechanics
  • Year: 2019
  • Issue: 7
  • 83
  • 1788
  • Pages: 80-97

Risk of surface blast load on pile foundations

Grounds and foundations, underground structures
  • Year: 2019
  • Issue: 6
  • 171
  • 2205
  • Pages: 47-61

Modelling of contact interaction of structures with the base under dynamic loading

Structural mechanics
  • Year: 2019
  • Issue: 5
  • 106
  • 1961
  • Pages: 167-178

Mixed finite-element method in V.I. Slivker’s semi-shear thin-walled bar theory

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 5
  • 151
  • 2105
  • Pages: 79-93

Finite element model of Reisner’s plates in stresses

Structural mechanics
  • Year: 2019
  • Issue: 5
  • 87
  • 2011
  • Pages: 61-78

Behaviour of axisymmetric thick plates resting against conical surface

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 2
  • 94
  • 2269
  • Pages: 92-104

The semi-shear theory of V.I. Slivker for the stability problems of thin-walled bars

Structural mechanics
  • Year: 2019
  • Issue: 3
  • 118
  • 2343
  • Pages: 66-79

Bearing capacity of fastener steel tube full hall scaffolds

Structural mechanics
  • Year: 2019
  • Issue: 3
  • 58
  • 1957
  • Pages: 35-45

The effect of perforations on the deformability of welded beam with corrugated webs

Structural mechanics
  • Year: 2019
  • Issue: 3
  • 109
  • 2147
  • Pages: 18-34

The watertight geomembrane elements. Use experience in the hydraulic engineering

Hydraulic engineering
  • Year: 2009
  • Issue: 6
  • 39
  • 1935
  • Pages: 35-43

A probabilistic method for estimating the technical state of reinforced concrete monolithic slabs of old urban area buildings

Monitoring and testing of buildings and structures
  • Year: 2010
  • Issue: 4
  • 38
  • 1636
  • Pages: 49-58

Monolithic constructions made of light nanoconcrete by the example of 5-story multilayer parking

Building constructions, buildings and structures
  • Year: 2010
  • Issue: 5
  • 9
  • 1446
  • Pages: 12-15

Bottom paving as a part of the low pressure culvert erected by the float-on method

Hydraulic engineering
  • Year: 2012
  • Issue: 9
  • 10
  • 1475
  • Pages: 97-102

Designing of steel frameworks from thin-walled cold-formed profiles in SCAD Office

Technology and organization of construction
  • Year: 2010
  • Issue: 8
  • 27
  • 1591
  • Pages: 38-46

Application of shell and solid elements in the analysis of building steel designs with software SCAD and Nastran accounting for geometrical and physical nonlinearity

Structural mechanics
  • Year: 2011
  • Issue: 3
  • 17
  • 1579
  • Pages: 4-20

Finite element modelling of open section perforated thin-walled studs made from thin-walled steel profiles

Structural mechanics
  • Year: 2011
  • Issue: 3
  • 9
  • 1352
  • Pages: 32-35

Substantive provisions of Numeral-analytical boundary elements method

Structural mechanics
  • Year: 2011
  • Issue: 4
  • 12
  • 1640
  • Pages: 33-39

Installation errors in calculating large-panel buildings

Building constructions, buildings and structures
  • Year: 2011
  • Issue: 6
  • 18
  • 1899
  • Pages: 35-40

Calculation algorithm of steel-reinforced concrete water passages

Hydraulic engineering
  • Year: 2011
  • Issue: 6
  • 17
  • 1692
  • Pages: 41-49

Station Adler railway terminal structures modelling taking into account seismic base isolation

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2012
  • Issue: 1
  • 14
  • 1722
  • Pages: 22-30

Complex Analysis of Energy Efficiency of public buildings: case study of VGTU

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 2
  • 12
  • 1518
  • Pages: 9-17

Use of quick-setting substances in watertight elements for rock material dams

Hydraulic engineering
  • Year: 2012
  • Issue: 3
  • 7
  • 1569
  • Pages: 48-53

Reliability validation of hydropower units of high-head developments

Hydraulic engineering
  • Year: 2012
  • Issue: 5
  • 17
  • 1667
  • Pages: 30-37

Estimating reliability of buildings and structures according to the methods of the risk of unserviceability

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 7
  • 27
  • 1489
  • Pages: 76-88

Finite element modeling of fracture processes and estimation of durability of the road bridge with account of corrosion damages

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 7
  • 15
  • 1632
  • Pages: 32-42

On the decision of contact problems of structural mechanics with unilateral constraints and friction by step-by-step analysis

Structural mechanics
  • Year: 2013
  • Issue: 1
  • 14
  • 1676
  • Pages: 75-81

About analysis of large problems of structural mechanics on multi-core computers

Structural mechanics
  • Year: 2013
  • Issue: 5
  • 14
  • 1624
  • Pages: 116-124

Simulation of degradation of bond between reinforcing bar and concrete. Part 1. Models with account of the discontinuity

Structural mechanics
  • Year: 2013
  • Issue: 5
  • 59
  • 1926
  • Pages: 86-99

The effect of construction joints and cracks on the stress-strain state of the arch-gravity dam

Hydraulic engineering
  • Year: 2013
  • Issue: 5
  • 12
  • 1612
  • Pages: 76-85

Evolutionary optimization of steel trusses with the nodal joints of rods

Structural mechanics
  • Year: 2013
  • Issue: 5
  • 39
  • 3319
  • Pages: 28-37

Numerical study of hyperelastic materials

Structural mechanics
  • Year: 2013
  • Issue: 9
  • 24
  • 1755
  • Pages: 69-71

Corrosion cracking propagation and fatigue strength of complex technical systems

Monitoring and testing of buildings and structures
  • Year: 2013
  • Issue: 9
  • 16
  • 1892
  • Pages: 42-48

Adaptive models of short-term surface subsidence prediction and detection of the most hazardous building position in displacement trough

Monitoring and testing of buildings and structures
  • Year: 2013
  • Issue: 9
  • 9
  • 1836
  • Pages: 10-22

Stress finite element models for determining the frequencies of free oscillations

Structural mechanics
  • Year: 2016
  • Issue: 7
  • 25
  • 1991
  • Pages: 39-54

The Simulation of Bond Fracture between Reinforcing Bars and concrete. Part 2. Models without taking the Bond Discontinuity into account

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 1
  • 35
  • 2211
  • Pages: 23-40

Experimental research and finite element analysis of elastic and strength properties of fiberglass composite material

Building Materials
  • Year: 2014
  • Issue: 3
  • 60
  • 2051
  • Pages: 25-39

Ice induced vibrations of offshore structures

Hydraulic engineering
  • Year: 2014
  • Issue: 4
  • 31
  • 1844
  • Pages: 72-88

Tubular composite columns in a non-symmetrical fire

Fire safety in construction
  • Year: 2014
  • Issue: 5
  • 16
  • 1742
  • Pages: 107-120

Influence of structural parameters of the masonry on effective elastic properties and strength

Structural mechanics
  • Year: 2014
  • Issue: 5
  • 9
  • 1615
  • Pages: 95-106

Stress-strain behavior investigation of friction grip bolts in flange joints of trusses

Structural mechanics
  • Year: 2014
  • Issue: 5
  • 23
  • 1869
  • Pages: 54-62

Quadrilateral shell finite element for analysis of thin-walled reinforced concrete structures

Building constructions, buildings and structures
  • Year: 2014
  • Issue: 5
  • 11
  • 1670
  • Pages: 27-36

Multifactorial forecast of thermal behavior in building envelope elements

Energy efficiency and thermal protection of buildings
  • Year: 2014
  • Issue: 8
  • 24
  • 1890
  • Pages: 25-37

Buildings with suspended structures in seismic areas

Building constructions, buildings and structures
  • Year: 2016
  • Issue: 5
  • 34
  • 2001
  • Pages: 17-26

Analysis of local stability of the rectangular tubes filled with concrete

Building constructions, buildings and structures
  • Year: 2016
  • Issue: 4
  • 31
  • 1832
  • Pages: 59-68

Reticular-stretched thermoprofile: a numerical and analytical study

Structural mechanics
  • Year: 2015
  • Issue: 5
  • 9
  • 1722
  • Pages: 74-85

Settlement calculation of clay bed reinforced with vertical elements

Grounds and foundations, underground structures
  • Year: 2015
  • Issue: 4
  • 15
  • 1652
  • Pages: 19-27

Surrogate modeling for initial rotational stiffness of welded tubular joints

Structural mechanics
  • Year: 2016
  • Issue: 3
  • 37
  • 1983
  • Pages: 53-76

Durability and Deformability of Braced Bending Elements with External Sheet Rreinforcement

Building constructions, buildings and structures
  • Year: 2016
  • Issue: 3
  • 21
  • 1850
  • Pages: 3-15

Calculation method of bending plates with assuming shear deformations

Structural mechanics
  • Year: 2019
  • Issue: 1
  • 56
  • 2072
  • Pages: 107-122

Combined Method of 3d Analysis for Underground Structures in View of Surrounding Infinite Homogeneous and Inhomogeneous Medium

Grounds and foundations, underground structures
  • Year: 2016
  • Issue: 2
  • 18
  • 1774
  • Pages: 83-91

Method of initial functions in model of compression linearly deformable layered foundation under normal local load

Structural mechanics
  • Year: 2015
  • Issue: 1
  • 17
  • 1670
  • Pages: 91-96

Finite element models for the analysis of nonlinear deformation of shells stepwise-variable thickness with holes, channels and cavities

Structural mechanics
  • Year: 2015
  • Issue: 1
  • 29
  • 2061
  • Pages: 56-69

Modeling of porous material fracture

Building Materials
  • Year: 2017
  • Issue: 1
  • 30
  • 2650
  • Pages: 3-22

Stress state of protective shells in the area of holes due to prestressed reinforcement curvature

Structural mechanics
  • Year: 2017
  • Issue: 2
  • 24
  • 1748
  • Pages: 33-41

The functional of additional energy for stability analysis of spatial rod systems

Structural mechanics
  • Year: 2017
  • Issue: 2
  • 24
  • 1643
  • Pages: 18-32

Modeling of indentation and slip of wedge punch

Structural mechanics
  • Year: 2017
  • Issue: 6
  • 18
  • 1732
  • Pages: 78-101

Methods of identification of concrete elastic-plastic-damage models

Monitoring and testing of buildings and structures
  • Year: 2017
  • Issue: 8
  • 52
  • 1873
  • Pages: 279-297

Dynamic stability of the lattice truss of the bridge taking into account local oscillations

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2017
  • Issue: 8
  • 21
  • 1820
  • Pages: 266-278

Flat rod systems: optimization with overall stability control

Structural mechanics
  • Year: 2017
  • Issue: 8
  • 26
  • 1904
  • Pages: 181-192

Finite element analysis of crane secondary truss

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 1
  • 41
  • 2079
  • Pages: 68-89

Finite element models in stresses for plane elasticity problems

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 1
  • 29
  • 1981
  • Pages: 23-37

Adaptive finite-element models in structural health monitoring systems

Technology and organization of construction
  • Year: 2018
  • Issue: 2
  • 57
  • 1816
  • Pages: 169-178

Deformation compatibility of masonry and composite materials

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 2
  • 38
  • 1912
  • Pages: 136-150

Refined finite element of rods for stability calculation

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 3
  • 22
  • 1612
  • Pages: 54-65

Cold-formed RHS T joints with initial geometrical imperfections

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 4
  • 30
  • 2162
  • Pages: 81-94

Influence of stiffness of node on stability and strength of thin-walled structure

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 4
  • 50
  • 1929
  • Pages: 48-61

Energy intensity of parts made from polyurethane elastomers

Building Materials
  • Year: 2018
  • Issue: 5
  • 17
  • 1546
  • Pages: 102-115

Finite element models in stresses for bending plates

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 6
  • 27
  • 1557
  • Pages: 170-190

Strength evaluation of the Prussian vaults made from brick aggregate concrete

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 6
  • 74
  • 2514
  • Pages: 95-102

Experimental justification of strainer meshes of NPP sump

Hydraulics and Engineering Hydrology
  • Year: 2018
  • Issue: 7
  • 28
  • 1710
  • Pages: 208-221

Optimization of hybrid I-beams using modified particle swarm method

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 7
  • 27
  • 1612
  • Pages: 175-185

Laminar polymer composites for wooden structures

Building Materials
  • Year: 2018
  • Issue: 7
  • 47
  • 1860
  • Pages: 3-11

Stress-strain behavior of welded joints in railway girders

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2018
  • Issue: 8
  • 42
  • 1643
  • Pages: 119-129

Rational use of HPSFRC in multi-storey building

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 8
  • 67
  • 2376
  • Pages: 3-14