Publication schedule
  • №3 April 2021
  • №4 June 2021
  • №5 September 2021

Articles by keywords "stress"

Low-heat steaming treatment of concrete with polycarboxylate superplasticizers

Building Materials
  • Year: 2021
  • Issue: 2
  • 16
  • 96
  • Pages: 10213-10213

Design parameters of steel fiber concrete beams

Building constructions, buildings and structures
  • Year: 2021
  • Issue: 2
  • 26
  • 112
  • Pages: 10207-10207

Strength of ultra-high rockfill dam concrete face

Hydraulic engineering
  • Year: 2021
  • Issue: 1
  • 47
  • 231
  • Pages: 10113-10113

Impact of loading rate on asphalt concrete deformation and failure

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2020
  • Issue: 8
  • 46
  • 255
  • Pages: 10008-10008

Flange connections with high-strength bolts with technological heredity of bolts

Structural mechanics
  • Year: 2020
  • Issue: 7
  • 51
  • 312
  • Pages: 9912-9912

The effect of formworks on the temperature regime in the mass concrete

Building Materials
  • Year: 2020
  • Issue: 7
  • 42
  • 287
  • Pages: 9911-9911

Numerical simulation of concrete dam during heavy rain

Hydraulic engineering
  • Year: 2020
  • Issue: 7
  • 68
  • 363
  • Pages: 9903-9903

Stress-strain state of Insulated Glass Unit in structural glazing systems

Structural mechanics
  • Year: 2020
  • Issue: 6
  • 34
  • 445
  • Pages: 9808-9808

Optimisation of steel trusses with a choice of multi-stage prestressing conditions

Structural mechanics
  • Year: 2020
  • Issue: 5
  • 46
  • 431
  • Pages: 9705-9705

Stress-strain state of bending reinforced beams with cracks

Structural mechanics
  • Year: 2020
  • Issue: 5
  • 112
  • 609
  • Pages: 9701-9701

Deformed state of the bases buildings and structures from weak viscoelastic soils

Grounds and foundations, underground structures
  • Year: 2020
  • Issue: 3
  • 60
  • 766
  • Pages: 119-130

Method of plates stability analysis based on the moments approximations

Structural mechanics
  • Year: 2020
  • Issue: 3
  • 64
  • 644
  • Pages: 90-103

Loads for the design of the industrial building frame

Structural mechanics
  • Year: 2020
  • Issue: 3
  • 58
  • 736
  • Pages: 66-79

The strength of short compressed concrete elements in a fiberglass shell

Building Materials
  • Year: 2020
  • Issue: 2
  • 229
  • 1090
  • Pages: 3-10

Strength of underground pipelines under seismic effects

Grounds and foundations, underground structures
  • Year: 2020
  • Issue: 1
  • 113
  • 903
  • Pages: 97-120

Earthquake resistance of buildings on thawing permafrost grounds

Grounds and foundations, underground structures
  • Year: 2020
  • Issue: 1
  • 106
  • 884
  • Pages: 50-59

Failure simulation of a RC multi-storey building frame with prestressed girders

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 8
  • 152
  • 1107
  • Pages: 155-162

Stress-strain state of a glass panel with adhesive point fixings

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 8
  • 84
  • 743
  • Pages: 127-141

Equilibrium finite elements for plane problems of the elasticity theory

Structural mechanics
  • Year: 2019
  • Issue: 7
  • 74
  • 789
  • Pages: 80-97

Clay-cement-concrete diaphragm — justifying calculation for new-built constructions

Hydraulic engineering
  • Year: 2019
  • Issue: 5
  • 172
  • 1202
  • Pages: 16-25

Spatial stress state and dynamic characteristics of earth dams

Hydraulic engineering
  • Year: 2019
  • Issue: 5
  • 181
  • 1208
  • Pages: 3-15

Frost heaving of foundation pit for seasonal permafrost areas

Grounds and foundations, underground structures
  • Year: 2019
  • Issue: 2
  • 84
  • 985
  • Pages: 61-71

Modelling the stressed skin effect by using shell elements with meta-material model

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 2
  • 74
  • 870
  • Pages: 20-29

Non-nogging prestressed building frame with flat-slab deck

Building constructions, buildings and structures
  • Year: 2010
  • Issue: 3
  • 15
  • 734
  • Pages: 52-55

Saint-Venant principle in geotechnics

Grounds and foundations, underground structures
  • Year: 2010
  • Issue: 4
  • 20
  • 854
  • Pages: 31-32

Nanobeton use in monolithic large-span ribbed floors with post-stress

Building Materials
  • Year: 2009
  • Issue: 2
  • 12
  • 894
  • Pages: 54-58

Stability evaluation of slopes of earth dams with account of soil rheological properties

Hydraulic engineering
  • Year: 2012
  • Issue: 9
  • 20
  • 878
  • Pages: 49-58

Estimation of the soil body stability

Grounds and foundations, underground structures
  • Year: 2012
  • Issue: 9
  • 50
  • 1020
  • Pages: 41-48

Finite element modelling of open section perforated thin-walled studs made from thin-walled steel profiles

Structural mechanics
  • Year: 2011
  • Issue: 3
  • 6
  • 691
  • Pages: 32-35

The problem of bending the thick orthotropic plate of three-dimensional formulation

Structural mechanics
  • Year: 2011
  • Issue: 4
  • 17
  • 919
  • Pages: 40-47

Analysis of mathematical expectations of the cracks parameters from the degree of element deterioration based on historical data processingabout similar objects

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 1
  • 7
  • 788
  • Pages: 106-112

Strengthening of the beam structures taking into account repair and mounting forcesinfluence

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 1
  • 3
  • 714
  • Pages: 98-105

Numerical evaluating strength reliability of penstocks under hydraulic hammer

Hydraulics and Engineering Hydrology
  • Year: 2012
  • Issue: 6
  • 10
  • 881
  • Pages: 29-35

Behavior of plasters on the modern heat-effective exterior walls of buildings

Energy efficiency and thermal protection of buildings
  • Year: 2012
  • Issue: 8
  • 12
  • 991
  • Pages: 22-29

Stability assessment of concrete structures on not bedrock foundation

Grounds and foundations, underground structures
  • Year: 2013
  • Issue: 1
  • 11
  • 760
  • Pages: 57-64

Fatigue assessment of load-carrying welded cruciform joints

Monitoring and testing of buildings and structures
  • Year: 2013
  • Issue: 3
  • 4
  • 846
  • Pages: 51-58

Application of modified yield criteria for calculation of safe pressures on the subgrade soil

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2013
  • Issue: 4
  • 7
  • 816
  • Pages: 35-45

Influence of discontinuities on the rock mass stress-strain state around excavation

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2013
  • Issue: 4
  • 12
  • 899
  • Pages: 3-11

The effect of construction joints and cracks on the stress-strain state of the arch-gravity dam

Hydraulic engineering
  • Year: 2013
  • Issue: 5
  • 8
  • 823
  • Pages: 76-85

An assessment of stress-strain state of earth dams with account of elastic-plastic, moist properties of soil and large strains

Hydraulic engineering
  • Year: 2013
  • Issue: 5
  • 16
  • 977
  • Pages: 59-68

Stress-strain state of seepage-control wall constructed for repairs of earth rock-fill dam

Hydraulic engineering
  • Year: 2016
  • Issue: 8
  • 12
  • 1051
  • Pages: 3-17

Non-uniform torsion of thin-walled open-section multi-span beams

Structural mechanics
  • Year: 2016
  • Issue: 7
  • 35
  • 1047
  • Pages: 55-69

Stress finite element models for determining the frequencies of free oscillations

Structural mechanics
  • Year: 2016
  • Issue: 7
  • 21
  • 1059
  • Pages: 39-54

Experimental Investigation considering the Stressed State of some Essential Constructions of Large Hydropower Buildings

Hydraulic engineering
  • Year: 2014
  • Issue: 1
  • 13
  • 1024
  • Pages: 59-70

Assessment of stress-strain state of earth dams with allowance for non-linear strain of material and large strains

Hydraulic engineering
  • Year: 2014
  • Issue: 5
  • 14
  • 859
  • Pages: 73-82

Stress-strain behavior investigation of friction grip bolts in flange joints of trusses

Structural mechanics
  • Year: 2014
  • Issue: 5
  • 17
  • 939
  • Pages: 54-62

Distribution capacity of sandy soils reinforced with geosynthetics

Structural mechanics
  • Year: 2016
  • Issue: 6
  • 26
  • 839
  • Pages: 35-48

Allowing for changes in the calculated scheme during the analysis of structural behaviour

Building constructions, buildings and structures
  • Year: 2014
  • Issue: 5
  • 16
  • 962
  • Pages: 15-26

Effect of viscosity of petroleum products on deformation properties of concrete

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 7
  • 16
  • 1026
  • Pages: 16-22

Calculations of strengthened open profile thin-walled element enclosing structures

Structural mechanics
  • Year: 2014
  • Issue: 8
  • 7
  • 781
  • Pages: 49-56

Improved numerical methods in reliability analysis of suspension roof joints

Structural mechanics
  • Year: 2016
  • Issue: 5
  • 13
  • 1044
  • Pages: 27-41

3D performance of a seepage control wall in dam and foundation

Hydraulic engineering
  • Year: 2015
  • Issue: 5
  • 6
  • 845
  • Pages: 20-33

Analysis of normal operation of a rockfill dam with combination of seepage-control elements: reinforced concrete face and clay-cement-concrete wall

Hydraulic engineering
  • Year: 2016
  • Issue: 4
  • 8
  • 925
  • Pages: 3-9

Effects of structure type on viscoelastic properties of geosynthetics

Building Materials
  • Year: 2015
  • Issue: 4
  • 19
  • 932
  • Pages: 11-18

Impact of dam site configuration on 3D stress-strain state of concrete faced rockfill dam

Hydraulic engineering
  • Year: 2016
  • Issue: 3
  • 8
  • 1078
  • Pages: 16-39

Calculation method of bending plates with assuming shear deformations

Structural mechanics
  • Year: 2019
  • Issue: 1
  • 50
  • 1071
  • Pages: 107-122

Improvement of shear strength design of a road structure. Part 2. Modified models to calculate the principal and shear stresses

Structural mechanics
  • Year: 2016
  • Issue: 2
  • 13
  • 849
  • Pages: 51-68

Accounting for the elements stiffness change in the course of erection and operation

Structural mechanics
  • Year: 2015
  • Issue: 1
  • 19
  • 1070
  • Pages: 6-14

Deformation of concrete creep in the thermal stress state calculation of massive concrete and reinforced concrete structures

Structural mechanics
  • Year: 2017
  • Issue: 1
  • 23
  • 1183
  • Pages: 56-63

Stress-strain state and performance of a high rockfill dam with a grout curtain

Hydraulic engineering
  • Year: 2017
  • Issue: 1
  • 7
  • 1077
  • Pages: 44-55

Stress state of protective shells in the area of holes due to prestressed reinforcement curvature

Structural mechanics
  • Year: 2017
  • Issue: 2
  • 18
  • 843
  • Pages: 33-41

The functional of additional energy for stability analysis of spatial rod systems

Structural mechanics
  • Year: 2017
  • Issue: 2
  • 19
  • 805
  • Pages: 18-32

The thermo-stressed state in massive concrete structures

Structural mechanics
  • Year: 2017
  • Issue: 3
  • 30
  • 946
  • Pages: 51-60

Stress-strain state of seepage-control walls in foundations of embankment dams

Hydraulic engineering
  • Year: 2017
  • Issue: 5
  • 13
  • 763
  • Pages: 96-112

Quasistaticity of the process of dynamic strain of soils

Grounds and foundations, underground structures
  • Year: 2019
  • Issue: 1
  • 32
  • 1135
  • Pages: 71-91

The stress-strain state of ribbed shell structures

Structural mechanics
  • Year: 2017
  • Issue: 6
  • 25
  • 907
  • Pages: 147-160

Workability of high rockfill dam with a polymer face

Hydraulic engineering
  • Year: 2017
  • Issue: 7
  • 9
  • 909
  • Pages: 76-83

Thermal cracking resistance in massive foundation slabs in the building period

Grounds and foundations, underground structures
  • Year: 2017
  • Issue: 8
  • 25
  • 874
  • Pages: 193-200

Normal stresses of frost heaving as function of excess moisture

Grounds and foundations, underground structures
  • Year: 2017
  • Issue: 8
  • 14
  • 775
  • Pages: 130-139

Bearing capacity of rafter systems made of steel thin-walled structures in attic roofs

Structural mechanics
  • Year: 2017
  • Issue: 8
  • 27
  • 895
  • Pages: 28-39

Strength of reinforced concrete beams of high-performance concrete and fiber reinforced concrete

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 1
  • 42
  • 1137
  • Pages: 90-100

Finite element models in stresses for plane elasticity problems

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 1
  • 20
  • 1026
  • Pages: 23-37

Heat dissipation of cement and calculation of crack resistance of concrete massifs

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 2
  • 23
  • 867
  • Pages: 128-135

Serviceability of rockfill dam with reinforced concrete face and grout curtain

Hydraulic engineering
  • Year: 2018
  • Issue: 3
  • 7
  • 912
  • Pages: 77-85

Thermal cracking resistance in massive steel-reinforced concrete structures

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 3
  • 21
  • 835
  • Pages: 45-53

Strength of composite steel and concrete beams of highperformance concrete

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 3
  • 37
  • 919
  • Pages: 36-44

Models of direct anchoring of reinforcement in concrete

Building Materials
  • Year: 2018
  • Issue: 3
  • 27
  • 960
  • Pages: 3-13

The modeling method of discrete cracks in reinforced concrete under the torsion with bending

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 5
  • 35
  • 975
  • Pages: 160-173

Ultra-high rockfill dam with combination of the reinforced concrete face and clay-cement diaphragm

Hydraulic engineering
  • Year: 2018
  • Issue: 5
  • 9
  • 930
  • Pages: 135-148

Evolutionary optimization of prestressed steel frames

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 5
  • 18
  • 851
  • Pages: 32-42

Composition calculation and cracking estimation of concrete at early ages

Grounds and foundations, underground structures
  • Year: 2018
  • Issue: 6
  • 29
  • 927
  • Pages: 136-148

Suspension structure with cross-laminated timber deck panels

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 7
  • 20
  • 912
  • Pages: 126-132

Distribution of temperature, moisture, stress and strain in the highway

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2018
  • Issue: 7
  • 52
  • 866
  • Pages: 102-113

Stress-strain state of a steel-reinforced concrete slab under long-term

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 7
  • 19
  • 830
  • Pages: 12-23

Residual resource of a one-storey steel frame industrial building constructed with bridge cranes

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 8
  • 28
  • 890
  • Pages: 150-161

Stress-strain behavior of welded joints in railway girders

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2018
  • Issue: 8
  • 34
  • 805
  • Pages: 119-129

Additional load on barrel vaults of architectural monuments

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 8
  • 25
  • 1081
  • Pages: 15-28

Rational use of HPSFRC in multi-storey building

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 8
  • 46
  • 1085
  • Pages: 3-14