Articles by keywords "strength"
Construction of coconut shell column for the enhancement of expansive soil
- Year: 2024
- Volume: 17
- Issue: 8
- 0
- 74
- Pages: 13204-13204
Electrically conductive cement composites modified with weakly oxidized graphene
- Year: 2024
- Volume: 17
- Issue: 8
- 0
- 161
- Pages: 13203-13203
Strength and thermal conductivity properties of thermowood-cement composition
- Year: 2024
- Volume: 17
- Issue: 7
- 18
- 798
- Pages: 13107-13107
Ground granulated blast furnace slag and fly ash concrete
- Year: 2024
- Volume: 17
- Issue: 7
- 28
- 472
- Pages: 13103-13103
Cut-off wall in foundation of reservoir dam and tailing dam: comparative evaluation
- Year: 2024
- Volume: 17
- Issue: 6
- 20
- 287
- Pages: 13010-13010
Artificial intelligence models for determining the strength of centrally compressed pipe-concrete columns with square cross-section
- Year: 2024
- Volume: 17
- Issue: 6
- 29
- 359
- Pages: 13008-13008
Effects of chicken bone powder mixed with limestone and cement on the clayey soil geotechnical characteristics
- Year: 2024
- Volume: 17
- Issue: 6
- 23
- 461
- Pages: 13003-13003
Effect of nanosilica on properties of porcelanite aggregate concrete
- Year: 2024
- Volume: 17
- Issue: 5
- 53
- 734
- Pages: 12905-12905
Cable roof with stiffening girder and flexible membrane shell
- Year: 2024
- Volume: 17
- Issue: 5
- 54
- 1044
- Pages: 12902-12902
Compressible soil thickness and settlement prediction using elastoviscoplastic models: a comprehensive method
- Year: 2024
- Volume: 17
- Issue: 4
- 43
- 940
- Pages: 12803-12803
Anisotropy in mechanical properties of 3D-printed layered concrete
- Year: 2024
- Volume: 17
- Issue: 3
- 48
- 1103
- Pages: 12708-12708
Mechanical behavior and eco-efficiency of sisal fiber reinforced cement composites containing husk rice ash
- Year: 2024
- Volume: 17
- Issue: 3
- 108
- 1224
- Pages: 12702-12702
Dynamic characteristics of a reinforced concrete frame under vibration load conditions
- Year: 2024
- Volume: 17
- Issue: 2
- 64
- 1054
- Pages: 12607-12607
Corrosion-resistant concretes for coastal underground structures
- Year: 2024
- Volume: 17
- Issue: 2
- 75
- 1040
- Pages: 12606-12606
Strength and stability of a pipe-concrete column of a high-rise building
- Year: 2024
- Volume: 17
- Issue: 2
- 127
- 1597
- Pages: 12601-12601
Enhancing lightweight concrete strength through modified zeolite-alkaline porous aggregate: composition optimization and structural application
- Year: 2024
- Volume: 17
- Issue: 1
- 96
- 1548
- Pages: 12507-12507
Stabilization of expansive soil with lime and brick dust
- Year: 2023
- Issue: 8
- 94
- 1396
- Pages: 12401-12401
Shear strength and chemical properties of soft clayey soil treated with magnetized water
- Year: 2023
- Issue: 8
- 53
- 1131
- Pages: 12406-12406
Radiation changes in hardened Portland cement paste under the influence of gamma radiation
- Year: 2023
- Issue: 8
- 69
- 1253
- Pages: 12403-12403
Cementless binder based on high-calcium fly ash with calcium nitrate additive
- Year: 2023
- Issue: 8
- 78
- 1294
- Pages: 12405-12405
Lateral bracing and steel shear wall integration in steel high-rises
- Year: 2023
- Issue: 7
- 184
- 1507
- Pages: 12309-12309
Self-compacting concrete with finely dispersed additives and superplasticizer
- Year: 2023
- Issue: 7
- 200
- 1672
- Pages: 12306-12306
Cementless binder consisting of high-calcium fly ash, silica fume and magnesium chloride
- Year: 2023
- Issue: 7
- 160
- 1350
- Pages: 12305-12305
Performance of aluminium shaving waste and silica fume blended mortar
- Year: 2023
- Issue: 6
- 42
- 1065
- Pages: 12209-12209
Heat-conducting and dielectric characteristics of polyorganosiloxane composites
- Year: 2023
- Issue: 6
- 31
- 1238
- Pages: 12203-12203
Structural behavior of concrete arches reinforced with glass textiles
- Year: 2023
- Issue: 6
- 81
- 1548
- Pages: 12202-12202
High-strength building ceramics based on fly ash – red mud mixtures
- Year: 2023
- Issue: 5
- 95
- 1342
- Pages: 12104-12104
Behavior of timber-timber composite structure connected by inclined screws
- Year: 2023
- Issue: 4
- 86
- 1403
- Pages: 12004-12004
Strength and crack-resistance of concrete with fibre fillers and modifying nano-additives
- Year: 2023
- Issue: 3
- 53
- 1373
- Pages: 11909-11909
Regularity of natural oscillations characteristics change of tall earth dams
- Year: 2023
- Issue: 2
- 70
- 1548
- Pages: 11807-11807
Experimental behavior of novel GFRP reinforcing bars under compressive loads
- Year: 2023
- Issue: 2
- 52
- 1828
- Pages: 11805-11805
Performance of waste foundry sand concrete in sulfate environment
- Year: 2023
- Issue: 2
- 71
- 1746
- Pages: 11801-11801
Long-term strength and porosity of mortars based on ettringite binder
- Year: 2023
- Issue: 2
- 75
- 1598
- Pages: 11802-11802
High-performance concrete produced with locally available materials
- Year: 2023
- Issue: 1
- 125
- 2378
- Pages: 11702-11702
Peculiarities of hydration and frost resistance of cement with natural zeolite additive
- Year: 2023
- Issue: 1
- 51
- 1667
- Pages: 11711-11711
Effects of gradation and clay minerals on stabilized lateritic soil blocks
- Year: 2023
- Issue: 1
- 76
- 1636
- Pages: 11704-11704
Numerical analysis of the buried fiber concrete slabs dynamics under blast loads
- Year: 2023
- Issue: 1
- 101
- 1987
- Pages: 11703-11703
Size effect of cube specimen on strength of expanded clay fiber-reinforced concrete
- Year: 2022
- Issue: 8
- 71
- 1426
- Pages: 11612-11612
Porous glass ceramics from siliceous rocks with high operating temperature
- Year: 2022
- Issue: 8
- 74
- 1578
- Pages: 11615-11615
Structure and properties of cement systems with additives of calcined clay and carbonate rocks
- Year: 2022
- Issue: 8
- 100
- 1907
- Pages: 11602-11602
Influence of NaOH-concentration and blast-furnace-slag on the properties of geopolymer mortars
- Year: 2022
- Issue: 7
- 69
- 1673
- Pages: 11514-11514
High performance lightweight concretes for 3D printing
- Year: 2022
- Issue: 7
- 108
- 1927
- Pages: 11510-11510
Complex modified additive for concrete based on industrial waste
- Year: 2022
- Issue: 7
- 50
- 1454
- Pages: 11507-11507
Comparative feasibility analysis of fly ash bricks, clay bricks and fly ash incorporated clay bricks
- Year: 2022
- Issue: 7
- 110
- 1977
- Pages: 11502-11502
High-performance fine-grained nanostructured concrete based on low strength aggregates
- Year: 2022
- Issue: 6
- 48
- 1625
- Pages: 11413-11413
Shear strengthening of RC beam using RFRP composites
- Year: 2022
- Issue: 6
- 111
- 2118
- Pages: 11401-11401
Aerated dry mix concrete for remote northern territories
- Year: 2022
- Issue: 5
- 39
- 1573
- Pages: 11310-11310
Metamorphic rocks for manufactured sand and coarse aggregate for concrete and mortar
- Year: 2022
- Issue: 5
- 56
- 2405
- Pages: 11308-11308
Rubber concrete beams under the action of transverse bending
- Year: 2022
- Issue: 5
- 89
- 2141
- Pages: 11301-11301
Structural performance of corroded RC beams without shear reinforcement
- Year: 2022
- Issue: 4
- 107
- 1989
- Pages: 11211-11211
Fluorоanhydrite based composites with the thermoplastic additive
- Year: 2022
- Issue: 4
- 56
- 1780
- Pages: 11210-11210
Cement grinding aid based on glycerol-waste antifreeze
- Year: 2022
- Issue: 4
- 48
- 1585
- Pages: 11214-11214
Bearing capacity of riveted connections of mineral wool sandwich panels
- Year: 2022
- Issue: 4
- 65
- 1895
- Pages: 11202-11202
High-strength steel effects on the behavior of special shear walls
- Year: 2022
- Issue: 3
- 61
- 2013
- Pages: 11102-11102
Behavior of heat damaged reinforced recycled aggregate concrete beams repaired with NSM-CFRP strips
- Year: 2022
- Issue: 3
- 57
- 2154
- Pages: 11106-11106
Nanostructured high-performance concretes based on low-strength aggregates
- Year: 2022
- Issue: 2
- 74
- 1887
- Pages: 11015-11015
Estimation of soil properties by an artificial neural network
- Year: 2022
- Issue: 2
- 159
- 2646
- Pages: 11011-11011
Impact of elevated temperature on the shear behavior of strengthened RC beams
- Year: 2022
- Issue: 2
- 76
- 2053
- Pages: 11002-11002
Effect of elastomer polymer on the moisture susceptibility of asphalt concrete
- Year: 2022
- Issue: 1
- 104
- 2941
- Pages: 10901-10901
Lightweight concrete for 3D-printing with internal curing agent for Portland cement hydration
- Year: 2022
- Issue: 1
- 127
- 2091
- Pages: 10915-10915
Fibers reinforcement of the fissured clayey soil by desiccation
- Year: 2022
- Issue: 1
- 75
- 1924
- Pages: 10914-10914
Different types of basalt fibers for disperse reinforcing of fine-grained concrete
- Year: 2022
- Issue: 1
- 83
- 2225
- Pages: 10913-10913
The strength of fly ash concrete of experimental design
- Year: 2022
- Issue: 1
- 109
- 2406
- Pages: 10911-10911
Factors and mechanisms of nanomodification cement systems in the technological life cycle
- Year: 2022
- Issue: 1
- 47
- 2528
- Pages: 10906-10906
The shear behavior of Anchored CFRP Strengthened RC beams
- Year: 2022
- Issue: 1
- 59
- 2367
- Pages: 10905-10905
Differential characteristics of concrete in centrifugally spun and vibrospun building structures
- Year: 2021
- Issue: 8
- 80
- 2216
- Pages: 10812-10812
Waste iron powder as aggregate and binder in mortar production
- Year: 2021
- Issue: 8
- 60
- 2137
- Pages: 10810-10810
Physical and mechanical properties of construction and demolition waste
- Year: 2021
- Issue: 8
- 126
- 2432
- Pages: 10804-10804
Improvement of mechanical characteristics of mortar by using of wollastonite
A.V. Kozin
R.S. Fediuk
S.B. Yarusova
P.S. Gordienko
V.S. Lesovik
M.A. Mosaberpanah
Y.H. Mugahed Amran
G. Murali
- Year: 2021
- Issue: 7
- 55
- 1983
- Pages: 10715-10715
Properties of fine-grained concrete containing fly ash and bottom ash
- Year: 2021
- Issue: 7
- 94
- 2273
- Pages: 10711-10711
Long-term strength of polyethylene pipes with increased temperature resistance without reinforcement
- Year: 2021
- Issue: 7
- 72
- 2084
- Pages: 10712-10712
Methodology for solving parametric optimization problems of steel structures
- Year: 2021
- Issue: 7
- 97
- 2366
- Pages: 10705-10705
Structural reliability analysis using evidence theory and fuzzy probability distributions
- Year: 2021
- Issue: 7
- 94
- 2892
- Pages: 10704-10704
Technogenic anhydrite binder for high-strength concrete
- Year: 2021
- Issue: 7
- 50
- 1941
- Pages: 10701-10701
Performance of composite connections strengthened with CFRP laminate
- Year: 2021
- Issue: 6
- 94
- 1944
- Pages: 10614-10614
Impact of elevated temperature on the behavior of strengthened RC beams with CFRP
- Year: 2021
- Issue: 6
- 31
- 1851
- Pages: 10612-10612
Composite non-autoclaved aerated concrete based on an emulsion
- Year: 2021
- Issue: 6
- 68
- 2817
- Pages: 10605-10605
Effect of vertical circular openings on flexural strength of reinforced concrete beam
- Year: 2021
- Issue: 6
- 137
- 2890
- Pages: 10601-10601
Resistance to temperature and humidity changes of construction plywood and thermal-insulation boards
- Year: 2021
- Issue: 5
- 75
- 2368
- Pages: 10506-10506
A deformed state of the composite frame with phased installation
- Year: 2021
- Issue: 5
- 42
- 1962
- Pages: 10512-10512
The impact of depth on shear behavior of strengthened beams
- Year: 2021
- Issue: 5
- 97
- 2905
- Pages: 10501-10501
Experimental characterization of brick masonry for lateral strength evaluation
- Year: 2021
- Issue: 4
- 74
- 2517
- Pages: 10409-10409
Homogeneous pore distribution in foam concrete by two-stage foaming
R.E. Lukpanov
D. Dyussembinov
Ye.B. Utepov
D.O. Bazarbayev
D.V. Tsygulyov
S.B. Yenkebayev
Zh.A. Shakhmov
- Year: 2021
- Issue: 3
- 73
- 2820
- Pages: 10313-10313
The behavior of CFRP strengthened RC beams subjected to blast loading
- Year: 2021
- Issue: 3
- 123
- 3190
- Pages: 10309-10309
Reinforced concrete beams strength under power and environmental influences
- Year: 2021
- Issue: 3
- 251
- 3273
- Pages: 10303-10303
Properties of porous glass ceramics based on siliceous rocks
- Year: 2021
- Issue: 2
- 126
- 2702
- Pages: 10202-10202
Silica concrete compressive behavior under alternating magnetic field
- Year: 2021
- Issue: 1
- 100
- 2507
- Pages: 10112-10112
Stabilization of lateritic soil for masonry applications
- Year: 2021
- Issue: 1
- 112
- 2817
- Pages: 10109-10109
Basalt fiber reinforced expanded clay concrete for building structures
- Year: 2021
- Issue: 1
- 162
- 3305
- Pages: 10107-10107
Bond strength in PVA fibre reinforced fly ash-based geopolymer concrete
- Year: 2021
- Issue: 1
- 157
- 3077
- Pages: 10105-10105
Influence of raw greywater on compressive strength of concrete
- Year: 2020
- Issue: 8
- 84
- 2619
- Pages: 10010-10010
Hydration and structure formation of chloride-activated cement paste
- Year: 2020
- Issue: 8
- 60
- 2758
- Pages: 10009-10009
The formation mechanism of the porous structure of glass ceramics from siliceous rock
- Year: 2020
- Issue: 8
- 97
- 2680
- Pages: 10006-10006
Flange connections with high-strength bolts with technological heredity of bolts
- Year: 2020
- Issue: 7
- 100
- 2788
- Pages: 9912-9912
Mechanical-thermal characteristics of foamed ultra-lightweight composites
- Year: 2020
- Issue: 6
- 118
- 3064
- Pages: 9802-9802
Clinkerless slag-silica binder: hydration process and hardening kinetics (part 2)
- Year: 2020
- Issue: 5
- 81
- 2410
- Pages: 9712-9712
Behavior of CFRP strengthened columns damaged by thermal shock
- Year: 2020
- Issue: 5
- 51
- 2319
- Pages: 9708-9708
Stress-strain state of the precast monolithic bent element
- Year: 2020
- Issue: 5
- 43
- 2349
- Pages: 9706-9706
Optimisation of steel trusses with a choice of multi-stage prestressing conditions
- Year: 2020
- Issue: 5
- 71
- 2583
- Pages: 9705-9705
Stress-strain state of fiber cement cladding within curtain wall system
- Year: 2020
- Issue: 5
- 93
- 2608
- Pages: 9709-9709
The effect of simulated ambient conditions on durability of concrete
- Year: 2020
- Issue: 4
- 93
- 2654
- Pages: 138-156
Radiation changes of concrete aggregates under the influence of gamma radiation
- Year: 2020
- Issue: 4
- 69
- 2771
- Pages: 94-109
Impact of anchored CFRP on the torsional and bending behaviour of RC beams
- Year: 2020
- Issue: 4
- 69
- 2680
- Pages: 79-93
Analysis of reinforced soil sustainability while tunnel construction
- Year: 2020
- Issue: 3
- 83
- 3136
- Pages: 80-89
Stability of fixed-fixed shallow arches under arbitrary radial and vertical forces
- Year: 2020
- Issue: 3
- 80
- 2872
- Pages: 31-41
Behavior of strengthened concrete beams damaged by thermal shock
- Year: 2020
- Issue: 2
- 187
- 3191
- Pages: 93-107
Finite element modeling of cold-formed steel deck in bending
- Year: 2020
- Issue: 2
- 185
- 2864
- Pages: 129-144
Evolving crack influence on the strength of frozen sand soils
- Year: 2020
- Issue: 2
- 113
- 3237
- Pages: 54-64
The influence of polyfunctional modifier additives on properties of cement-ash fine-grained concrete
- Year: 2020
- Issue: 1
- 155
- 3152
- Pages: 121-133
Lightweight cement mortar with inorganic perlite microspheres for equipping oil and gas production wells
- Year: 2020
- Issue: 1
- 131
- 4063
- Pages: 83-96
Influence of silica fume on the pervious concrete with different levels of recycled aggregates
- Year: 2020
- Issue: 1
- 239
- 4240
- Pages: 71-82
Lightweight geopolymers made of mineral wool production waste
- Year: 2020
- Issue: 1
- 260
- 3986
- Pages: 3-12
Сlinkerless slag-silica binder: hydration process and hardening kinetics
- Year: 2019
- Issue: 8
- 107
- 3251
- Pages: 96-105
Strength and microstructure of alkali-activated natural pozzolan and limestone powder mortar
- Year: 2019
- Issue: 8
- 153
- 3298
- Pages: 36-47
The fine high-calcium fly ash as the basis of composite cementing material
- Year: 2019
- Issue: 7
- 144
- 3802
- Pages: 60-72
Heat transfer and thermal shock of recycled glass concrete
- Year: 2019
- Issue: 7
- 105
- 3093
- Pages: 27-38
Microstructure and strength of iron-filing Portland cement paste and mortar
- Year: 2019
- Issue: 6
- 140
- 3090
- Pages: 28-36
Method of proportioning the cement-water ratio of steam-cured concrete
- Year: 2019
- Issue: 6
- 149
- 3427
- Pages: 15-27
Physical and mechanical properties of cement stone with superabsorbent polyacrylate solutions
- Year: 2019
- Issue: 5
- 107
- 3016
- Pages: 179-186
Clay-cement-concrete diaphragm — justifying calculation for new-built constructions
- Year: 2019
- Issue: 5
- 201
- 3546
- Pages: 16-25
The modeling method of discrete cracks and rigidity in reinforced concrete
- Year: 2019
- Issue: 4
- 217
- 3885
- Pages: 60-69
Aggregate concrete factor (λ) for burnt clay brick aggregate concrete
- Year: 2019
- Issue: 3
- 94
- 3229
- Pages: 46-58
Strengthening of building structures using post-stressed reinforced concrete
- Year: 2009
- Issue: 3
- 46
- 2751
- Pages: 29-32
Strengthening of building structures using carbon composite materials
- Year: 2010
- Issue: 2
- 73
- 3455
- Pages: 19-22
Early loading of floor monolithic slabs with removable forms
- Year: 2010
- Issue: 4
- 21
- 2458
- Pages: 17-20