Articles by keywords "cement"

Axial capacity and ductility of reinforced concrete columns with strip plate steel and conventional stirrup reinforcements

Building constructions, buildings and structures
  • Year: 2025
  • Volume: 18
  • Issue: 1
  • 67
  • 298
  • Pages: 13304-13304

Dynamic behavior of a reinforced concrete slab of a pedestrian bridge with stiff rebars

Structural mechanics
  • Year: 2025
  • Volume: 18
  • Issue: 1
  • 43
  • 355
  • Pages: 13303-13303

Ensuring uniform brightness of the afterglow surface of the hardened cement paste with photoluminescent pigment

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 8
  • 41
  • 330
  • Pages: 13208-13208

Construction of coconut shell column for the enhancement of expansive soil

Grounds and foundations, underground structures
  • Year: 2024
  • Volume: 17
  • Issue: 8
  • 53
  • 549
  • Pages: 13204-13204

Electrically conductive cement composites modified with weakly oxidized graphene

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 8
  • 43
  • 566
  • Pages: 13203-13203

Strength and thermal conductivity properties of thermowood-cement composition

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 7
  • 31
  • 1043
  • Pages: 13107-13107

Dynamic responses of shallow foundations on saturated soil under impact loadings

Grounds and foundations, underground structures
  • Year: 2024
  • Volume: 17
  • Issue: 5
  • 76
  • 1024
  • Pages: 12903-12903

Structure of clay minerals of road soil-cement during complex modification

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2024
  • Volume: 17
  • Issue: 4
  • 35
  • 933
  • Pages: 12809-12809

Mechanical behavior and eco-efficiency of sisal fiber reinforced cement composites containing husk rice ash

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 3
  • 114
  • 1462
  • Pages: 12702-12702

Radiation changes in hardened Portland cement paste under the influence of gamma radiation

Building Materials
  • Year: 2023
  • Issue: 8
  • 72
  • 1506
  • Pages: 12403-12403

Performance of aluminium shaving waste and silica fume blended mortar

Building Materials
  • Year: 2023
  • Issue: 6
  • 44
  • 1285
  • Pages: 12209-12209

Alkali-activated bentonite clay-limestone cements

Building Materials
  • Year: 2023
  • Issue: 6
  • 43
  • 1338
  • Pages: 12206-12206

Triangular prism finite element based on piecewise constant stress approximations

Structural mechanics
  • Year: 2023
  • Issue: 5
  • 65
  • 1467
  • Pages: 12105-12105

Regression models of irregular vertical displacement of a roadway cross section caused by frost heaving

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2023
  • Issue: 4
  • 47
  • 1479
  • Pages: 12009-12009

Phase structure of cement pastes with antifreeze agents

Building Materials
  • Year: 2023
  • Issue: 4
  • 41
  • 1894
  • Pages: 12007-12007

Influence of biological additives on the properties of cement systems

Building Materials
  • Year: 2023
  • Issue: 2
  • 63
  • 2715
  • Pages: 11803-11803

High-performance concrete produced with locally available materials

Building Materials
  • Year: 2023
  • Issue: 1
  • 129
  • 2711
  • Pages: 11702-11702

Elliptical underground concrete block bridge with minimal weight

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2023
  • Issue: 1
  • 65
  • 1672
  • Pages: 11713-11713

Peculiarities of hydration and frost resistance of cement with natural zeolite additive

Building Materials
  • Year: 2023
  • Issue: 1
  • 54
  • 1914
  • Pages: 11711-11711

Iraqi bentonite as natural pozzolan

Building Materials
  • Year: 2022
  • Issue: 8
  • 48
  • 2050
  • Pages: 11604-11604

Structure and properties of cement systems with additives of calcined clay and carbonate rocks

Building Materials
  • Year: 2022
  • Issue: 8
  • 101
  • 2180
  • Pages: 11602-11602

Durable concrete in sewerage using non-grinded rice husk ash and water-permeable mould

Building Materials
  • Year: 2022
  • Issue: 7
  • 36
  • 1953
  • Pages: 11511-11511

Influence of electromagnetic field on characteristics of crushed materials

Building Materials
  • Year: 2022
  • Issue: 6
  • 46
  • 1890
  • Pages: 11408-11408

Forced vibrations of a box element of a multi-story building under dynamic impact

Monitoring and testing of buildings and structures
  • Year: 2022
  • Issue: 6
  • 63
  • 1776
  • Pages: 11406-11406

Aerated dry mix concrete for remote northern territories

Building Materials
  • Year: 2022
  • Issue: 5
  • 39
  • 1762
  • Pages: 11310-11310

Structural performance of corroded RC beams without shear reinforcement

Building constructions, buildings and structures
  • Year: 2022
  • Issue: 4
  • 109
  • 2206
  • Pages: 11211-11211

Cement grinding aid based on glycerol-waste antifreeze

Building Materials
  • Year: 2022
  • Issue: 4
  • 50
  • 1796
  • Pages: 11214-11214

Fine-grained cement-ash concrete for 3D-printing

Building Materials
  • Year: 2022
  • Issue: 4
  • 70
  • 2128
  • Pages: 11203-11203

Phase composition of belite cements of increased hydraulic activity

Building Materials
  • Year: 2022
  • Issue: 4
  • 65
  • 1992
  • Pages: 11201-11201

Production of Portland cement using fluorine gypsum – hydrofluoric acid waste

Building Materials
  • Year: 2022
  • Issue: 3
  • 73
  • 2284
  • Pages: 11113-11113

Nanostructured high-performance concretes based on low-strength aggregates

Building Materials
  • Year: 2022
  • Issue: 2
  • 75
  • 2098
  • Pages: 11015-11015

Application of artificial neural networks for prediction of concrete properties

Structural mechanics
  • Year: 2022
  • Issue: 2
  • 71
  • 2631
  • Pages: 11007-11007

Numerical shear of post-tensioned beams with inverted-U shaped reinforcements

Structural mechanics
  • Year: 2022
  • Issue: 2
  • 83
  • 2530
  • Pages: 11006-11006

Different types of basalt fibers for disperse reinforcing of fine-grained concrete

Building Materials
  • Year: 2022
  • Issue: 1
  • 86
  • 2456
  • Pages: 10913-10913

The strength of fly ash concrete of experimental design

Structural mechanics
  • Year: 2022
  • Issue: 1
  • 114
  • 2691
  • Pages: 10911-10911

Effect of ferronickel slag in concrete and mortar

Building Materials
  • Year: 2022
  • Issue: 1
  • 115
  • 2929
  • Pages: 10909-10909

Factors and mechanisms of nanomodification cement systems in the technological life cycle

Building Materials
  • Year: 2022
  • Issue: 1
  • 48
  • 2844
  • Pages: 10906-10906

Improvement of mechanical characteristics of mortar by using of wollastonite

Building Materials
  • Year: 2021
  • Issue: 7
  • 57
  • 2184
  • Pages: 10715-10715

Flexural properties of hogweed chips reinforced cement composites

Building Materials
  • Year: 2021
  • Issue: 7
  • 45
  • 2880
  • Pages: 10709-10709

The dependence of the gathering characteristics of nanocarbon cement on the parameters of its production process

Building Materials
  • Year: 2021
  • Issue: 6
  • 41
  • 2045
  • Pages: 10615-10615

The combination of bamboo grid and concrete pile as soil reinforcement under the embankment

Grounds and foundations, underground structures
  • Year: 2021
  • Issue: 6
  • 73
  • 2972
  • Pages: 10610-10610

Performance investigation of demolition wastes-based concrete composites

Building Materials
  • Year: 2021
  • Issue: 6
  • 71
  • 2755
  • Pages: 10608-10608

Composite non-autoclaved aerated concrete based on an emulsion

Building Materials
  • Year: 2021
  • Issue: 6
  • 70
  • 3150
  • Pages: 10605-10605

Production of sustainable concrete using sawdust

Building Materials
  • Year: 2021
  • Issue: 5
  • 139
  • 2937
  • Pages: 10507-10507

Self-sensing cement composite for traffic monitoring in intelligent transport system

Building Materials
  • Year: 2021
  • Issue: 5
  • 56
  • 2593
  • Pages: 10505-10505

Effect of sawdust ash and laterite on the electrical resistivity of concrete

Building Materials
  • Year: 2021
  • Issue: 5
  • 100
  • 2836
  • Pages: 10502-10502

Interaction of drill-injection piles with the surrounding soil

Grounds and foundations, underground structures
  • Year: 2021
  • Issue: 4
  • 108
  • 2919
  • Pages: 10407-10407

Plastic shrinkage of concrete modified by metakaolin

Building Materials
  • Year: 2021
  • Issue: 3
  • 105
  • 3128
  • Pages: 10314-10314

Modeling the influence of input factors on foam concrete properties

Building Materials
  • Year: 2021
  • Issue: 3
  • 110
  • 2726
  • Pages: 10311-10310

Composition and properties of cement system with glutaraldehyde

Building Materials
  • Year: 2021
  • Issue: 3
  • 58
  • 3003
  • Pages: 10307-10307

Cement and animal bone powder on rheological characteristics of bitumen

Building Materials
  • Year: 2021
  • Issue: 3
  • 97
  • 2668
  • Pages: 10304-10304

Tendencies in developing structural designs of non-soil seepage-control structures of embankment dams

Hydraulic engineering
  • Year: 2021
  • Issue: 2
  • 101
  • 2827
  • Pages: 10212-10212

Heat release and thermal conductivity of expanded-clay concrete for 3D printer

Building Materials
  • Year: 2021
  • Issue: 2
  • 99
  • 3177
  • Pages: 10210-10210

Structure and properties of mortar printed on a 3D printer

Building Materials
  • Year: 2021
  • Issue: 2
  • 147
  • 3503
  • Pages: 10206-10206

Performance of two-way hinges in reinforced concrete structures

Structural mechanics
  • Year: 2021
  • Issue: 2
  • 143
  • 3501
  • Pages: 10204-10204

Stabilization of lateritic soil for masonry applications

Grounds and foundations, underground structures
  • Year: 2021
  • Issue: 1
  • 113
  • 3091
  • Pages: 10109-10109

Hydration and structure formation of chloride-activated cement paste

Building Materials
  • Year: 2020
  • Issue: 8
  • 61
  • 2988
  • Pages: 10009-10009

The influence of reinforcing joints on the fire resistance of reinforced concrete structures

Building constructions, buildings and structures
  • Year: 2020
  • Issue: 8
  • 136
  • 3128
  • Pages: 10004-10004

Durability behaviors of foam concrete made of binder composites

Building Materials
  • Year: 2020
  • Issue: 8
  • 92
  • 3005
  • Pages: 10003-10003

Mathematical model of concrete biological corrosion

Building Materials
  • Year: 2020
  • Issue: 7
  • 92
  • 2781
  • Pages: 9906-9906

Cement slurry from electro-phosphoric slag

Building Materials
  • Year: 2020
  • Issue: 6
  • 61
  • 2728
  • Pages: 9806-9806

Effect of multicomponent modifier on the properties of cement pastes formulated from self-compacting concrete

Building Materials
  • Year: 2020
  • Issue: 6
  • 72
  • 2991
  • Pages: 9805-9805

Mechanical-thermal characteristics of foamed ultra-lightweight composites

Building Materials
  • Year: 2020
  • Issue: 6
  • 119
  • 3358
  • Pages: 9802-9802

Stress-strain state of the precast monolithic bent element

Structural mechanics
  • Year: 2020
  • Issue: 5
  • 43
  • 2522
  • Pages: 9706-9706

Behavior of concrete beams reinforced with fiberglass composite rebar under load

Structural mechanics
  • Year: 2020
  • Issue: 5
  • 137
  • 2818
  • Pages: 9703-9703

Fine-grained concrete with various types of fibers

Building Materials
  • Year: 2020
  • Issue: 5
  • 155
  • 3260
  • Pages: 9702-9702

Stress-strain state of fiber cement cladding within curtain wall system

Building Materials
  • Year: 2020
  • Issue: 5
  • 98
  • 2792
  • Pages: 9709-9709

Stress-strain state of bending reinforced beams with cracks

Structural mechanics
  • Year: 2020
  • Issue: 5
  • 175
  • 3612
  • Pages: 9701-9701

Cold-bonded fly ash aggregate concrete

Building Materials
  • Year: 2020
  • Issue: 3
  • 163
  • 3935
  • Pages: 104-118

Analysis of reinforced soil sustainability while tunnel construction

Grounds and foundations, underground structures
  • Year: 2020
  • Issue: 3
  • 84
  • 3376
  • Pages: 80-89

Evaluation of the basalt fiber reinforced pumice lightweight concrete

Building Materials
  • Year: 2020
  • Issue: 2
  • 188
  • 3346
  • Pages: 81-92

Micromechanical characteristics of high-performance concrete subjected to modifications of composition and homogenization

Building Materials
  • Year: 2020
  • Issue: 2
  • 127
  • 3044
  • Pages: 145-157

The geogrid-reinforced gravel base pavement model

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2020
  • Issue: 2
  • 180
  • 3396
  • Pages: 21-30

Heat protective properties of enclosure structure from thin-wall profiles with foamed concrete

Energy efficiency and thermal protection of buildings
  • Year: 2020
  • Issue: 2
  • 218
  • 3758
  • Pages: 11-20

Properties of cement-bound mixes depending on technological factors

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2020
  • Issue: 1
  • 128
  • 3274
  • Pages: 147-155

Impact behavior of rehabilitated post-tensioned slabs previously damaged by impact loading

Structural mechanics
  • Year: 2020
  • Issue: 1
  • 135
  • 3226
  • Pages: 134-146

Lightweight cement mortar with inorganic perlite microspheres for equipping oil and gas production wells

Building Materials
  • Year: 2020
  • Issue: 1
  • 135
  • 4334
  • Pages: 83-96

Mechanical and electrical properties of concrete modified by carbon nanoparticles

Building Materials
  • Year: 2019
  • Issue: 8
  • 182
  • 4964
  • Pages: 163-172

Reducing alkaline corrosion of basalt fiber in concrete

Building Materials
  • Year: 2019
  • Issue: 7
  • 97
  • 3049
  • Pages: 112-120

The fine high-calcium fly ash as the basis of composite cementing material

Building Materials
  • Year: 2019
  • Issue: 7
  • 149
  • 4059
  • Pages: 60-72

Ductility and moment redistribution capacity of two-span RC beams

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 6
  • 172
  • 3478
  • Pages: 104-118

Resistance of cement stone in sanitation solutions

Building Materials
  • Year: 2019
  • Issue: 6
  • 108
  • 3538
  • Pages: 72-84

Method of proportioning the cement-water ratio of steam-cured concrete

Building Materials
  • Year: 2019
  • Issue: 6
  • 151
  • 3617
  • Pages: 15-27

Strengthening of RC beams by ferrocement made with unconventional concrete

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 5
  • 218
  • 4492
  • Pages: 94-105

Finite element model of Reisner’s plates in stresses

Structural mechanics
  • Year: 2019
  • Issue: 5
  • 91
  • 3592
  • Pages: 61-78

Mechanical properties of two-stage concrete modified by silica fume

Building Materials
  • Year: 2019
  • Issue: 5
  • 227
  • 4455
  • Pages: 26-38

Clay-cement-concrete diaphragm — justifying calculation for new-built constructions

Hydraulic engineering
  • Year: 2019
  • Issue: 5
  • 201
  • 3800
  • Pages: 16-25

Factors effecting the recovery process of self-repairing concrete

Building Materials
  • Year: 2019
  • Issue: 4
  • 156
  • 3604
  • Pages: 52-59

Factors affecting the ultrasonic disaggregation of powders

Building Materials
  • Year: 2019
  • Issue: 4
  • 114
  • 3740
  • Pages: 14-24

Mechanical properties of magnesium potassium phosphate cement

Building Materials
  • Year: 2019
  • Issue: 3
  • 122
  • 6427
  • Pages: 59-65

The effect of cement replacement and homogenization procedure on concrete mechanical properties

Building Materials
  • Year: 2019
  • Issue: 2
  • 84
  • 3198
  • Pages: 46-60

The mathematical simulator of deformation of nonlinear elastic ribbed shells under big displacements

Structural mechanics
  • Year: 2009
  • Issue: 6
  • 15
  • 2574
  • Pages: 16-24

Calculation of concrete structures strengthening with compound materials

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 3
  • 35
  • 2657
  • Pages: 25-28

The formation of microstructure of the compounded cement materials

Building Materials
  • Year: 2009
  • Issue: 8
  • 14
  • 2598
  • Pages: 13-16

Nanomodified magnesian schungite protective concrete

Building Materials
  • Year: 2010
  • Issue: 2
  • 5
  • 2743
  • Pages: 49-55

External reinforcement of reinforced concrete column by composite coal-plastic material

Building constructions, buildings and structures
  • Year: 2010
  • Issue: 3
  • 16
  • 2781
  • Pages: 35-38

Examination and reinforcement technologies for masonry structures

Monitoring and testing of buildings and structures
  • Year: 2010
  • Issue: 7
  • 57
  • 2847
  • Pages: 14-20

The problem of bending the thick orthotropic plate of three-dimensional formulation

Structural mechanics
  • Year: 2011
  • Issue: 4
  • 26
  • 2867
  • Pages: 40-47

Monitoring of unique buildings with using of dynamic parameters according to GOST R 53778-2010

Monitoring and testing of buildings and structures
  • Year: 2011
  • Issue: 7
  • 27
  • 2943
  • Pages: 33-39

Test methods of corrosion state of reinforced concrete structures

Monitoring and testing of buildings and structures
  • Year: 2011
  • Issue: 7
  • 38
  • 3200
  • Pages: 18-25

Foam concrete of certain average density for thermal insulation of attic floors

Energy efficiency and thermal protection of buildings
  • Year: 2011
  • Issue: 8
  • 22
  • 3024
  • Pages: 19-24

Inspection methods of reinforcement parameters of concrete structures

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 1
  • 63
  • 3662
  • Pages: 4-13

The dispersed reinforcement usage in the hydraulic structures construction

Hydraulic engineering
  • Year: 2009
  • Issue: 1
  • 20
  • 2986
  • Pages: 28-32

Reliability validation of hydropower units of high-head developments

Hydraulic engineering
  • Year: 2012
  • Issue: 5
  • 21
  • 3034
  • Pages: 30-37

Influence of the operational environment on biological firmness of building composites

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 7
  • 13
  • 3125
  • Pages: 23-31

Application of the film-forming material for increasing concrete articles firmness in cold continental climate

Building Materials
  • Year: 2012
  • Issue: 8
  • 8
  • 2515
  • Pages: 79-84

Concrete hardening accelerator containing galvanic sludge

Building Materials
  • Year: 2012
  • Issue: 8
  • 11
  • 2800
  • Pages: 67-71

Next generation concrete on the basis of fine-grained dry powder mixes

Building Materials
  • Year: 2012
  • Issue: 8
  • 261
  • 4111
  • Pages: 47-53

Variational functionals for two-dimensional equilibrium and stability problems of Cosserat-Timoshenko elastic rods

Structural mechanics
  • Year: 2013
  • Issue: 1
  • 25
  • 3195
  • Pages: 87-96

Application of calorimetry for prognosticating strength increase of fast-curing cement systems

Building Materials
  • Year: 2013
  • Issue: 3
  • 28
  • 2909
  • Pages: 36-42

Temperature reduction during brucite-based magnesia cement production

Building Materials
  • Year: 2013
  • Issue: 3
  • 13
  • 3116
  • Pages: 29-35

The effect of construction joints and cracks on the stress-strain state of the arch-gravity dam

Hydraulic engineering
  • Year: 2013
  • Issue: 5
  • 15
  • 2797
  • Pages: 76-85

Stress-strain state of seepage-control wall constructed for repairs of earth rock-fill dam

Hydraulic engineering
  • Year: 2016
  • Issue: 8
  • 32
  • 3465
  • Pages: 3-17

Adaptive models of short-term surface subsidence prediction and detection of the most hazardous building position in displacement trough

Monitoring and testing of buildings and structures
  • Year: 2013
  • Issue: 9
  • 11
  • 3030
  • Pages: 10-22

Stress finite element models for determining the frequencies of free oscillations

Structural mechanics
  • Year: 2016
  • Issue: 7
  • 33
  • 3260
  • Pages: 39-54

Predicting the Durability of Concrete Structures, including Sulfate Corrosion of Concrete

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 1
  • 44
  • 3622
  • Pages: 41-52

Investigation of fresh and hardened properties of Calcium sulfoaluminate (CSA) cement blends

Building Materials
  • Year: 2014
  • Issue: 3
  • 47
  • 3732
  • Pages: 63-70

Experimental research and finite element analysis of elastic and strength properties of fiberglass composite material

Building Materials
  • Year: 2014
  • Issue: 3
  • 86
  • 3572
  • Pages: 25-39

Distribution capacity of sandy soils reinforced with geosynthetics

Structural mechanics
  • Year: 2016
  • Issue: 6
  • 34
  • 3155
  • Pages: 35-48

Structure-forming processes of cement composites, modified by sucrose additions

Building Materials
  • Year: 2016
  • Issue: 6
  • 23
  • 3042
  • Pages: 3-11

On the influence on the efficiency of anti-shrinkage additives superplasticizer

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 7
  • 25
  • 3065
  • Pages: 23-30

Effect of viscosity of petroleum products on deformation properties of concrete

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 7
  • 25
  • 3313
  • Pages: 16-22

Compressive strength of concrete with millet husk ash (MHA) as a partial replacement for cement

Building Materials
  • Year: 2015
  • Issue: 7
  • 56
  • 3135
  • Pages: 74-79

The influence of clay additives in Portland cement on the compressive strength of the cement stone

Building Materials
  • Year: 2015
  • Issue: 7
  • 69
  • 3288
  • Pages: 66-73

Factors affecting the deterioration of concrete pavement slabs

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2015
  • Issue: 7
  • 72
  • 3841
  • Pages: 30-38

Settlement calculation of clay bed reinforced with vertical elements

Grounds and foundations, underground structures
  • Year: 2015
  • Issue: 4
  • 26
  • 3071
  • Pages: 19-27

Durability and Deformability of Braced Bending Elements with External Sheet Rreinforcement

Building constructions, buildings and structures
  • Year: 2016
  • Issue: 3
  • 32
  • 3231
  • Pages: 3-15

Modified water-cement ratio rule for the design of air-entrained concrete

Building Materials
  • Year: 2019
  • Issue: 1
  • 56
  • 3481
  • Pages: 123-135

Load-to-failure bending test of wood composite beams connected by gang nail

Structural mechanics
  • Year: 2015
  • Issue: 2
  • 56
  • 3423
  • Pages: 77-85

Effect of mechanochemical activation of binder on properties of fine-grained concrete

Building Materials
  • Year: 2015
  • Issue: 2
  • 51
  • 3479
  • Pages: 63-69

Strength and deformability of concrete structures reinforced with fibre-reinforced polymer bars

Building constructions, buildings and structures
  • Year: 2016
  • Issue: 2
  • 59
  • 3255
  • Pages: 32-41

Determination of residual load-bearing capacity of concrete beams at the operation stage by the strength reinforcement and concrete criterion

Structural mechanics
  • Year: 2015
  • Issue: 1
  • 25
  • 3512
  • Pages: 15-23

Influence of mechanochemical activation on the cement hydration features

Structural mechanics
  • Year: 2016
  • Issue: 2
  • 68
  • 3363
  • Pages: 3-12

Deformation of concrete creep in the thermal stress state calculation of massive concrete and reinforced concrete structures

Structural mechanics
  • Year: 2017
  • Issue: 1
  • 48
  • 4020
  • Pages: 56-63

Stress-strain state and performance of a high rockfill dam with a grout curtain

Hydraulic engineering
  • Year: 2017
  • Issue: 1
  • 17
  • 3719
  • Pages: 44-55

Stress state of protective shells in the area of holes due to prestressed reinforcement curvature

Structural mechanics
  • Year: 2017
  • Issue: 2
  • 29
  • 3336
  • Pages: 33-41

The thermo-stressed state in massive concrete structures

Structural mechanics
  • Year: 2017
  • Issue: 3
  • 58
  • 3292
  • Pages: 51-60

Disaggregation of ultrafine powders in conditions of ultrasonic cavitation

Building Materials
  • Year: 2017
  • Issue: 3
  • 32
  • 3217
  • Pages: 21-29

Mechanical properties of nanocarbon modified cement

Building Materials
  • Year: 2017
  • Issue: 4
  • 51
  • 3212
  • Pages: 54-61

Stress-strain state of seepage-control walls in foundations of embankment dams

Hydraulic engineering
  • Year: 2017
  • Issue: 5
  • 21
  • 2798
  • Pages: 96-112

The impact of superplasticizers on the radiation changes in Portland cement stone and concretes

Building Materials
  • Year: 2017
  • Issue: 5
  • 30
  • 3022
  • Pages: 70-87

Deformations of steel roof trusses under shock emergency action

Structural mechanics
  • Year: 2017
  • Issue: 5
  • 24
  • 3018
  • Pages: 3-13

Influence of superplasticizers on the concrete mix properties

Building Materials
  • Year: 2017
  • Issue: 6
  • 77
  • 3817
  • Pages: 140-146

The phase composition and properties of aluminate cements after early loading

Building Materials
  • Year: 2017
  • Issue: 7
  • 27
  • 2973
  • Pages: 114-122

Workability of high rockfill dam with a polymer face

Hydraulic engineering
  • Year: 2017
  • Issue: 7
  • 24
  • 3479
  • Pages: 76-83

The effect of particulate reinforcement on strength and deformation characteristics of fine-grained concrete

Building Materials
  • Year: 2017
  • Issue: 7
  • 85
  • 3717
  • Pages: 66-75

Behaviour of concrete with a disperse reinforcement under dynamic loads

Monitoring and testing of buildings and structures
  • Year: 2017
  • Issue: 7
  • 30
  • 3052
  • Pages: 3-14

Burnt rock of the coal deposits in the concrete products manufacturing

Building Materials
  • Year: 2017
  • Issue: 8
  • 35
  • 3471
  • Pages: 169-180

Normal stresses of frost heaving as function of excess moisture

Grounds and foundations, underground structures
  • Year: 2017
  • Issue: 8
  • 30
  • 3143
  • Pages: 130-139

Crack self-healing in clay-сement concrete diaphragm of embankment dam

Hydraulic engineering
  • Year: 2018
  • Issue: 1
  • 52
  • 3639
  • Pages: 3-12

Heat dissipation of cement and calculation of crack resistance of concrete massifs

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 2
  • 69
  • 3554
  • Pages: 128-135

Ultra-light hybrid composite wood-polymer structural materials in construction

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 3
  • 55
  • 3234
  • Pages: 132-139

Compressed-bent masonry walls reinforced with composite materials

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 3
  • 50
  • 4909
  • Pages: 112-119

Models of direct anchoring of reinforcement in concrete

Building Materials
  • Year: 2018
  • Issue: 3
  • 43
  • 3076
  • Pages: 3-13

Fire resistant fibre reinforced vermiculite concrete with volcanic application

Fire safety in construction
  • Year: 2018
  • Issue: 4
  • 84
  • 3434
  • Pages: 181-194

Mechanical properties of synthetic fibers applied to concrete reinforcement

Building Materials
  • Year: 2018
  • Issue: 4
  • 42
  • 3250
  • Pages: 15-23

Wooden beams with reinforcement along a curvilinear trajectory

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 5
  • 48
  • 3496
  • Pages: 193-201

Structurization processes of cement composites modified with electrolytic additives

Building Materials
  • Year: 2018
  • Issue: 5
  • 23
  • 2840
  • Pages: 125-134

Lightweight steel concrete structures technology with foam fiber-cement sheets

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 6
  • 136
  • 4347
  • Pages: 103-111

Adhesive dry mix using an amorphous aluminosilicates

Building Materials
  • Year: 2018
  • Issue: 6
  • 24
  • 2884
  • Pages: 23-29

Ultimate state of the support zone of reinforced concrete beams

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 7
  • 83
  • 3096
  • Pages: 165-174

Structure and mineral composition of soil-cement with complex additive

Building Materials
  • Year: 2018
  • Issue: 7
  • 28
  • 3257
  • Pages: 38-48

Stress-strain behavior of welded joints in railway girders

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2018
  • Issue: 8
  • 46
  • 2940
  • Pages: 119-129

Rheological behavior of 3D printable cement paste: criterial evaluation

Building Materials
  • Year: 2018
  • Issue: 8
  • 116
  • 3368
  • Pages: 97-101

Fiber concrete for the construction industry

Building Materials
  • Year: 2018
  • Issue: 8
  • 132
  • 4196
  • Pages: 41-47

Сообщить автору об опечатке:

Адрес страницы с ошибкой:

Текст с ошибкой:

Ваш комментарий или корректная версия: