Articles by keywords "FORM"
Durability of ultra-high-performance concrete with silica fume and rice husk ash
- Year: 2025
- Volume: 18
- Issue: 8
- 109
- 733
- Pages: 14003-14003
Structural behavior of ultra-high performance concrete beams with different rebar and fiber reinforcement ratios
- Year: 2025
- Volume: 18
- Issue: 7
- 50
- 596
- Pages: 13908-13908
Variation of stress-strain state of rockfill dam affected by creeping
- Year: 2025
- Volume: 18
- Issue: 7
- 39
- 553
- Pages: 13906-13906
The expansion deformation characteristics of expansive soil under acid pollution
- Year: 2025
- Volume: 18
- Issue: 6
- 49
- 756
- Pages: 13809-13809
Evaluating the structural safety of steel frames using a probabilistic robustness index
- Year: 2025
- Volume: 18
- Issue: 5
- 65
- 1135
- Pages: 13709-13709
Method for developing a corporate BIM classification system
- Year: 2025
- Volume: 18
- Issue: 4
- 86
- 1323
- Pages: 13609-13609
Nonlinear seismic response of a reinforced concrete large-panel precast building
- Year: 2025
- Volume: 18
- Issue: 3
- 117
- 3933
- Pages: 13508-13508
Composite wooden beams performance under short-term loading
- Year: 2025
- Volume: 18
- Issue: 3
- 78
- 3769
- Pages: 13506-13506
Simplified finite element model for rectangular CFST columns strength calculation under eccentric compression
- Year: 2025
- Volume: 18
- Issue: 2
- 122
- 4263
- Pages: 13406-13406
Axial capacity and ductility of reinforced concrete columns with strip plate steel and conventional stirrup reinforcements
- Year: 2025
- Volume: 18
- Issue: 1
- 137
- 4392
- Pages: 13304-13304
Dynamic behavior of power transmission line supports under wind influence
- Year: 2025
- Volume: 18
- Issue: 1
- 104
- 4630
- Pages: 13301-13301
Ensuring uniform brightness of the afterglow surface of the hardened cement paste with photoluminescent pigment
- Year: 2024
- Volume: 17
- Issue: 8
- 72
- 4191
- Pages: 13208-13208
Loads on hydraulic engineering and berthing structures of the coastal zone of the Neva Bay
- Year: 2024
- Volume: 17
- Issue: 8
- 75
- 3947
- Pages: 13206-13206
Method of integrated consideration of factors for calculation of anchor system of pontoons
- Year: 2024
- Volume: 17
- Issue: 7
- 43
- 3114
- Pages: 13108-13108
Response spectra at elevations of station dam equipment installation
- Year: 2024
- Volume: 17
- Issue: 6
- 50
- 2771
- Pages: 13006-13006
Soil information model for prediction the soil properties characteristics
- Year: 2024
- Volume: 17
- Issue: 5
- 60
- 3019
- Pages: 12909-12909
The beam finite element with five nodal degrees of freedom
- Year: 2024
- Volume: 17
- Issue: 4
- 111
- 3820
- Pages: 12802-12802
Performance of TGk dowel connector plates in wooden structure joints under long-term load
- Year: 2024
- Volume: 17
- Issue: 2
- 46
- 3108
- Pages: 12610-12610
Application of fractal analysis to assess the quality of the appearance of paint and varnish coatings
- Year: 2024
- Volume: 17
- Issue: 2
- 68
- 3479
- Pages: 12608-12608
Consolidation of water-saturated viscoelastic subgrade
- Year: 2024
- Volume: 17
- Issue: 1
- 109
- 4455
- Pages: 12502-12502
Fiber optics based system of monitoring load-bearing building structures
- Year: 2023
- Issue: 7
- 285
- 4922
- Pages: 12301-12301
Accounting of plastic deformations in the calculation of frames using the displacement method
- Year: 2023
- Issue: 6
- 57
- 3648
- Pages: 12210-12210
Shrinkage of ultra-high performance concrete with superabsorbent polymers
- Year: 2023
- Issue: 5
- 83
- 4338
- Pages: 12108-12108
Method for determining the thermal fluctuation constants of the generalized Zhurkov equation
- Year: 2023
- Issue: 2
- 39
- 4354
- Pages: 11804-11804
Modelling of thin-walled members with restrained torsion considering the section properties
- Year: 2023
- Issue: 2
- 80
- 4775
- Pages: 11806-11806
High-performance concrete produced with locally available materials
- Year: 2023
- Issue: 1
- 138
- 5596
- Pages: 11702-11702
Numerical analysis of the buried fiber concrete slabs dynamics under blast loads
- Year: 2023
- Issue: 1
- 107
- 5026
- Pages: 11703-11703
Effect of uncertainties of shear wall on reliability of rehabilitated structure
- Year: 2023
- Issue: 1
- 117
- 4931
- Pages: 11701-11701
Elastic-plastic deformation of a round plate reinforced with stiffeners
- Year: 2022
- Issue: 8
- 60
- 4626
- Pages: 11613-11613
Intumescent compounds for fireproofing of polymer pipelines
- Year: 2022
- Issue: 8
- 44
- 4241
- Pages: 11607-11607
Compressive strength prediction model of lightweight high-strength concrete
- Year: 2022
- Issue: 7
- 102
- 4812
- Pages: 11512-11512
High performance lightweight concretes for 3D printing
- Year: 2022
- Issue: 7
- 119
- 4468
- Pages: 11510-11510
High-performance fine-grained nanostructured concrete based on low strength aggregates
- Year: 2022
- Issue: 6
- 50
- 4061
- Pages: 11413-11413
The influence of the sky radiative temperature on the building energy performance
- Year: 2022
- Issue: 6
- 91
- 4429
- Pages: 11412-11412
Assessment of crack resistance of ultra-high earth core rockfill dam by pore pressure
- Year: 2022
- Issue: 6
- 69
- 4483
- Pages: 11411-11411
Forced vibrations of a box element of a multi-story building under dynamic impact
- Year: 2022
- Issue: 6
- 69
- 3850
- Pages: 11406-11406
Fracture characteristics of high-performance concrete using nano-silica
- Year: 2022
- Issue: 6
- 71
- 4920
- Pages: 11402-11402
The calculation of the dynamic characteristics of the spillway of the dam
- Year: 2022
- Issue: 5
- 109
- 3986
- Pages: 11312-11312
Effect of temperature on permanent deformation of polymer-modified asphalt mixture
- Year: 2022
- Issue: 5
- 66
- 5183
- Pages: 11309-11309
Thermal stresses at the early stage of the hardening of steel-fiber reinforced concrete
- Year: 2022
- Issue: 5
- 64
- 4896
- Pages: 11304-11304
Numerical modeling of basalt roll fire-protection for light steel thin-walled structures
- Year: 2022
- Issue: 4
- 85
- 3563
- Pages: 11215-11215
Flexural behavior of 60 m UHPC pre-stressed box girder
- Year: 2022
- Issue: 4
- 106
- 4999
- Pages: 11212-11212
Mooring system optimization for marine floating hydrotechnical structures
- Year: 2022
- Issue: 3
- 95
- 4419
- Pages: 11112-11112
Nanostructured high-performance concretes based on low-strength aggregates
- Year: 2022
- Issue: 2
- 76
- 4185
- Pages: 11015-11015
The behaviour of thin-walled beam with restrained torsion
- Year: 2022
- Issue: 2
- 92
- 5226
- Pages: 11009-11009
Effect of irregularity on seismic design parameters of RC-infilled structures
- Year: 2021
- Issue: 8
- 79
- 4583
- Pages: 10807-10807
Arbitrary quadrangular finite element for plates with shear deformations
- Year: 2021
- Issue: 7
- 64
- 4669
- Pages: 10707-10707
Ultra high-performance fiber reinforced concrete panel subjected to high velocity impact
- Year: 2021
- Issue: 7
- 119
- 4747
- Pages: 10703-10703
Layer model of elasticity modulus prediction for lightweight concretes
- Year: 2021
- Issue: 6
- 46
- 4971
- Pages: 10611-10611
Resistance to temperature and humidity changes of construction plywood and thermal-insulation boards
- Year: 2021
- Issue: 5
- 76
- 5518
- Pages: 10506-10506
Thin-walled compressed steel constructions under fire load
- Year: 2021
- Issue: 5
- 107
- 4836
- Pages: 10514-10514
Elasticity modulus of cement composites predicting using layer structure model
- Year: 2021
- Issue: 4
- 81
- 4866
- Pages: 10413-10413
Ultimate load capacity of high-performance fibre-concrete hollow square columns
- Year: 2021
- Issue: 4
- 77
- 5096
- Pages: 10412-10412
Freeze-thaw damage model for cement pavements in seasonal frost regions
- Year: 2021
- Issue: 4
- 89
- 5510
- Pages: 10406-10406
Setting seismic input characteristics required for designing
- Year: 2021
- Issue: 2
- 66
- 5374
- Pages: 10209-10209
Integration of digital twin and BIM technologies within factories of the future
- Year: 2021
- Issue: 1
- 555
- 7852
- Pages: 10114-10114
Stochastic model of the construction process implemented with application of sliding formwork
- Year: 2021
- Issue: 1
- 89
- 4969
- Pages: 10111-10111
Cold-formed steel joints with partial warping restraint
- Year: 2021
- Issue: 1
- 106
- 5416
- Pages: 10101-10101
Hydration and structure formation of chloride-activated cement paste
- Year: 2020
- Issue: 8
- 61
- 5307
- Pages: 10009-10009
Impact of loading rate on asphalt concrete deformation and failure
- Year: 2020
- Issue: 8
- 100
- 5102
- Pages: 10008-10008
Free vibration of axially loaded multi-cracked Timoshenko beams
- Year: 2020
- Issue: 8
- 107
- 5881
- Pages: 10002-10002
The effect of formworks on the temperature regime in the mass concrete
- Year: 2020
- Issue: 7
- 111
- 4762
- Pages: 9911-9911
Transition factor between elastic and deformation moduli for dispersive soils
- Year: 2020
- Issue: 7
- 66
- 4972
- Pages: 9907-9907
Behavior of concrete beams reinforced with fiberglass composite rebar under load
- Year: 2020
- Issue: 5
- 142
- 5383
- Pages: 9703-9703
A probabilistic approach to estimation of the ultimate load of end-bearing piles on settlement criterion
- Year: 2020
- Issue: 4
- 85
- 5609
- Pages: 70-78
Deformed state of the bases buildings and structures from weak viscoelastic soils
- Year: 2020
- Issue: 3
- 95
- 5113
- Pages: 119-130
Micromechanical characteristics of high-performance concrete subjected to modifications of composition and homogenization
- Year: 2020
- Issue: 2
- 127
- 4984
- Pages: 145-157
Finite element modeling of cold-formed steel deck in bending
- Year: 2020
- Issue: 2
- 191
- 5159
- Pages: 129-144
Properties of cement-bound mixes depending on technological factors
- Year: 2020
- Issue: 1
- 129
- 4916
- Pages: 147-155
Earthquake resistance of buildings on thawing permafrost grounds
- Year: 2020
- Issue: 1
- 160
- 5949
- Pages: 50-59
Dynamic deformation of a beam at sudden structural transformation of foundation
- Year: 2019
- Issue: 7
- 156
- 6806
- Pages: 129-144
Optimization of steel beam structures for frame buildings subject to their safety requirements
- Year: 2019
- Issue: 7
- 243
- 6583
- Pages: 3-15
Ductility and moment redistribution capacity of two-span RC beams
- Year: 2019
- Issue: 6
- 174
- 5565
- Pages: 104-118
Microstructure and strength of iron-filing Portland cement paste and mortar
- Year: 2019
- Issue: 6
- 141
- 5465
- Pages: 28-36
Mechanical properties of magnesium potassium phosphate cement
- Year: 2019
- Issue: 3
- 127
- 8992
- Pages: 59-65
The effect of cement replacement and homogenization procedure on concrete mechanical properties
- Year: 2019
- Issue: 2
- 88
- 5228
- Pages: 46-60
The mathematical simulator of deformation of nonlinear elastic ribbed shells under big displacements
- Year: 2009
- Issue: 6
- 15
- 4737
- Pages: 16-24
Shrinkage deformations of the concrete modified by chemical and fine mineral additives
- Year: 2009
- Issue: 7
- 14
- 4600
- Pages: 11-21
Nonlinear equations of ribbed shells balance taking into account the different properties of material
- Year: 2010
- Issue: 2
- 9
- 4803
- Pages: 36-44
Nonlinear equations of ribbed shells motion taking into account the different properties of the material. II
- Year: 2010
- Issue: 2
- 7
- 4772
- Pages: 45-48
Designing of steel frameworks from thin-walled cold-formed profiles in SCAD Office
- Year: 2010
- Issue: 8
- 40
- 4940
- Pages: 38-46
Finite element modelling of open section perforated thin-walled studs made from thin-walled steel profiles
- Year: 2011
- Issue: 3
- 16
- 4386
- Pages: 32-35
Building systems technical condition assessment based on the multilevel probabilistic analysis
- Year: 2011
- Issue: 7
- 17
- 5021
- Pages: 45-51
The finite elements for design of building walling made of thin-walled beams
- Year: 2011
- Issue: 8
- 61
- 5821
- Pages: 69-80
Mathematical deformation models of variable thickness shells with calculation of different materials` behaviour
- Year: 2012
- Issue: 1
- 13
- 4970
- Pages: 79-90
The Finite Elements Research for Calculation of Thin-Walled Bar Systems
- Year: 2012
- Issue: 1
- 52
- 5813
- Pages: 53-73
The complex assessment of a thermal performance of the building envelope
- Year: 2012
- Issue: 7
- 28
- 4687
- Pages: 43-49
Application of the film-forming material for increasing concrete articles firmness in cold continental climate
- Year: 2012
- Issue: 8
- 8
- 4269
- Pages: 79-84
Influence of flange width and wall parameters on effectiveness of cold-formed steel Sigma-profile in bending behavior
- Year: 2013
- Issue: 1
- 17
- 4856
- Pages: 97-102
Variational functionals for two-dimensional equilibrium and stability problems of Cosserat-Timoshenko elastic rods
- Year: 2013
- Issue: 1
- 25
- 5467
- Pages: 87-96
Geoinformation methods of identifying locations for prospective HPP
- Year: 2013
- Issue: 4
- 30
- 5094
- Pages: 70-82
Calculation of reliability of foundation bed in the deformations at the operational stage
- Year: 2013
- Issue: 4
- 23
- 4987
- Pages: 12-21
Bearing capacity of compressed continuous and perforated thinwalled steel members of C-shaped cold-formed profiles
- Year: 2013
- Issue: 5
- 38
- 5383
- Pages: 44-51
Analysis of the resistance of thin-walled cold-formed compressed steel members with closed cross-sections. Part 1
- Year: 2013
- Issue: 5
- 18
- 4902
- Pages: 38-43
Development of methodological support of the automated hydropower potential calculation using geographic information systems
- Year: 2013
- Issue: 6
- 29
- 4779
- Pages: 62-76
Numerical analysis of large deformation by finite element method
- Year: 2013
- Issue: 9
- 57
- 5476
- Pages: 64-68
Non-uniform torsion of thin-walled open-section multi-span beams
- Year: 2016
- Issue: 7
- 66
- 6037
- Pages: 55-69
The Calculation of Foundation Bed Reliability by Bearing Capacity (Shift) during Operation
- Year: 2014
- Issue: 1
- 11
- 4741
- Pages: 90-100
Experimental Investigation considering the Stressed State of some Essential Constructions of Large Hydropower Buildings
- Year: 2014
- Issue: 1
- 21
- 4752
- Pages: 59-70
Analysis of the Resistance of Thin-Walled Cold-Formed Compressed Steel Members with Closed Cross-sections. Part 2
- Year: 2014
- Issue: 1
- 16
- 5324
- Pages: 53-58
Detecting prospective regions in the Russian Federation for hydroelectric development based on analytic hierarchy process
- Year: 2014
- Issue: 4
- 20
- 4803
- Pages: 39-48
Method of thermotechnical uniformity coefficient evaluation by analyzing thermograms
- Year: 2016
- Issue: 6
- 19
- 5598
- Pages: 60-67
Bending, torsion and asymptotic analysis of the cantilever bar
- Year: 2014
- Issue: 5
- 20
- 4847
- Pages: 37-43
Quadrilateral shell finite element for analysis of thin-walled reinforced concrete structures
- Year: 2014
- Issue: 5
- 17
- 4742
- Pages: 27-36
Experimental study of tsunami-type waves impact on soil at foundations of offshore gravity platforms
- Year: 2014
- Issue: 6
- 22
- 6035
- Pages: 4-12
Adaptability to manufacture varieties of modern disassembled formwork systems
- Year: 2014
- Issue: 7
- 25
- 4592
- Pages: 80-88
Effect of viscosity of petroleum products on deformation properties of concrete
- Year: 2014
- Issue: 7
- 31
- 5482
- Pages: 16-22
Multifactorial forecast of thermal behavior in building envelope elements
- Year: 2014
- Issue: 8
- 33
- 5168
- Pages: 25-37
Improving the thermal performance of the building envelopes with the use of foam glass-ceramics
- Year: 2015
- Issue: 8
- 56
- 4952
- Pages: 56-67
Assessment of the mechanical properties of brick masonry by a flat-jack method
- Year: 2015
- Issue: 8
- 44
- 5449
- Pages: 20-29
Reticular-stretched thermoprofile: a numerical and analytical study
- Year: 2015
- Issue: 5
- 12
- 5187
- Pages: 74-85
Selection of protective measures against scouring at the foundations of offshore gravity platforms
- Year: 2015
- Issue: 3
- 45
- 5046
- Pages: 79-88
Deformation monitoring of building foundations by hydrostatic leveling
- Year: 2015
- Issue: 3
- 64
- 5833
- Pages: 21-28
Durability and Deformability of Braced Bending Elements with External Sheet Rreinforcement
- Year: 2016
- Issue: 3
- 32
- 5170
- Pages: 3-15
Calculation method of bending plates with assuming shear deformations
- Year: 2019
- Issue: 1
- 68
- 5676
- Pages: 107-122
Modeling a set of concrete strength in the program ELCUT at warming of monolithic structures by wire
- Year: 2015
- Issue: 2
- 43
- 6013
- Pages: 33-45
Numerical Investigations of Notched C-Profile Compressed Members with Initial Imperfections
- Year: 2016
- Issue: 2
- 38
- 5855
- Pages: 92-101
Finite element models for the analysis of nonlinear deformation of shells stepwise-variable thickness with holes, channels and cavities
- Year: 2015
- Issue: 1
- 37
- 5885
- Pages: 56-69
Design of cold-formed tension members using the CFSteel software
- Year: 2016
- Issue: 1
- 84
- 6451
- Pages: 42-59
Stress-strain state and performance of a high rockfill dam with a grout curtain
- Year: 2017
- Issue: 1
- 17
- 5619
- Pages: 44-55
Qualified method of layer-by-layer summation to define the settlement of foundation
- Year: 2017
- Issue: 4
- 54
- 5139
- Pages: 36-45
The impact of superplasticizers on the radiation changes in Portland cement stone and concretes
- Year: 2017
- Issue: 5
- 32
- 5022
- Pages: 70-87
Oriented particle boards: effect of the tangential load component
- Year: 2017
- Issue: 6
- 16
- 5208
- Pages: 33-42
Determination of soil deformation moduli after National Building Codes of Russia and Germany
- Year: 2017
- Issue: 7
- 59
- 5158
- Pages: 139-149
The effect of particulate reinforcement on strength and deformation characteristics of fine-grained concrete
- Year: 2017
- Issue: 7
- 86
- 5754
- Pages: 66-75
Thermal cracking resistance in massive foundation slabs in the building period
- Year: 2017
- Issue: 8
- 65
- 5290
- Pages: 193-200
Earthquake engineering optimization of structures by economic criterion
- Year: 2017
- Issue: 8
- 83
- 5791
- Pages: 67-83
Ventilated facade integrated with the HVAC system for cold climate
- Year: 2018
- Issue: 1
- 80
- 6474
- Pages: 47-58
Deformation compatibility of masonry and composite materials
- Year: 2018
- Issue: 2
- 46
- 5463
- Pages: 136-150
Influence of heat conducting inclusions on reliability of the system “sandwich panel – metal frame”
- Year: 2018
- Issue: 2
- 43
- 5249
- Pages: 116-127
Behavior of a hollowed-wood ventilated façade during temperature changes
- Year: 2018
- Issue: 3
- 43
- 4812
- Pages: 103-111
The seismic stability of facade system with facing by composite panels
- Year: 2018
- Issue: 4
- 112
- 5819
- Pages: 62-72
Influence of the compensating device parameters on the underwater pipeline stability
- Year: 2018
- Issue: 4
- 15
- 4564
- Pages: 24-36
FEM modeling of external walls made of autoclaved aerated concrete blocks
- Year: 2018
- Issue: 5
- 41
- 6128
- Pages: 202-211
Installation diagram of the lattice truss with an arbitrary number of panels
- Year: 2018
- Issue: 5
- 14
- 5233
- Pages: 174-182
Computational modelling of stiffness and strength properties of the contact seam
- Year: 2018
- Issue: 5
- 28
- 5188
- Pages: 149-159
Composition calculation and cracking estimation of concrete at early ages
- Year: 2018
- Issue: 6
- 57
- 5735
- Pages: 136-148
Improvement of the soil deformation modulus using an expandable polyurethane resin
- Year: 2018
- Issue: 7
- 162
- 6394
- Pages: 222-234
Optimization of hybrid I-beams using modified particle swarm method
- Year: 2018
- Issue: 7
- 38
- 5040
- Pages: 175-185
Water permeability of the polymer screen with a system of slits of hydraulic structures
- Year: 2018
- Issue: 7
- 24
- 4581
- Pages: 148-164
Thermal-insulation boards from fibrous plant wastes and urea-formaldehyde binder
- Year: 2018
- Issue: 7
- 39
- 5378
- Pages: 136-147
Suspension structure with cross-laminated timber deck panels
- Year: 2018
- Issue: 7
- 48
- 5827
- Pages: 126-132
Implementation of pulse heat supply for dependent connection of customers
- Year: 2018
- Issue: 7
- 54
- 4920
- Pages: 114-125
The nonlinear stress-strain state of the concrete-filled steel tube structures
- Year: 2018
- Issue: 7
- 35
- 4861
- Pages: 73-82
Properties and thermal insulation performance of light-weight concrete
- Year: 2018
- Issue: 8
- 116
- 5806
- Pages: 173-191