Articles by keywords "method"
Method for developing a corporate BIM classification system
- Year: 2025
- Volume: 18
- Issue: 4
- 82
- 1108
- Pages: 13609-13609
Rectangular flat finite element for modeling the process of crack formation
- Year: 2025
- Volume: 18
- Issue: 3
- 122
- 3761
- Pages: 13502-13502
An investigation on the nonlinear dynamic behavior of reinforced concrete shear wall under seismic loading
- Year: 2025
- Volume: 18
- Issue: 2
- 115
- 3756
- Pages: 13409-13409
Bending of orthotropic scalene triangle plates: finite difference modeling
M.S. Beketova
Zh.S. Nuguzhinov
V.I. Travush
N.I. Vatin
S.K. Akhmediyev
I.A. Kurokhtina
R.A. Shagiyeva
V.F. Mikhailov
O. Khabidolda
- Year: 2025
- Volume: 18
- Issue: 2
- 115
- 3920
- Pages: 13407-13407
Simplified finite element model for rectangular CFST columns strength calculation under eccentric compression
- Year: 2025
- Volume: 18
- Issue: 2
- 116
- 3976
- Pages: 13406-13406
Natural vibrations of buried pipeline section
- Year: 2025
- Volume: 18
- Issue: 1
- 92
- 3888
- Pages: 13305-13305
Artificial intelligence models for determining the strength of centrally compressed pipe-concrete columns with square cross-section
- Year: 2024
- Volume: 17
- Issue: 6
- 52
- 3216
- Pages: 13008-13008
Response spectra at elevations of station dam equipment installation
- Year: 2024
- Volume: 17
- Issue: 6
- 50
- 2510
- Pages: 13006-13006
Simplified method for estimating the first natural frequency of a symmetric arch truss
- Year: 2024
- Volume: 17
- Issue: 6
- 137
- 4011
- Pages: 13001-13001
Providing free vibrations and stability of a multi-span beam under temperature changes by selecting the support system
- Year: 2024
- Volume: 17
- Issue: 4
- 102
- 3109
- Pages: 12810-12810
Numerical prediction of crack formation in historic masonry buildings
- Year: 2024
- Volume: 17
- Issue: 4
- 82
- 3511
- Pages: 12805-12805
Three-field FEM for analysis of thin elastic shells
- Year: 2024
- Volume: 17
- Issue: 3
- 70
- 3466
- Pages: 12710-12710
Dynamic characteristics of a reinforced concrete frame under vibration load conditions
- Year: 2024
- Volume: 17
- Issue: 2
- 80
- 4203
- Pages: 12607-12607
Determining parameters of high-velocity open water flow
- Year: 2024
- Volume: 17
- Issue: 1
- 48
- 3106
- Pages: 12508-12508
Concrete face rockfill dam located on deformed foundation: stress-strain state
- Year: 2023
- Issue: 8
- 89
- 3457
- Pages: 12402-12402
Digital models for retrospective analysis of the structure of currents in the Neva Bay
- Year: 2023
- Issue: 8
- 59
- 3110
- Pages: 12411-12411
Clay soil stiffness under consolidated isotropic drained triaxial tests
- Year: 2023
- Issue: 5
- 89
- 3947
- Pages: 12106-12106
Triangular prism finite element based on piecewise constant stress approximations
- Year: 2023
- Issue: 5
- 65
- 3864
- Pages: 12105-12105
Parametric oscillations of a viscous-elastic orthotropic shell of variable thickness
- Year: 2023
- Issue: 4
- 75
- 3594
- Pages: 12010-12010
Soil-structure interaction: theoretical research, in-situ observations, and practical applications
- Year: 2023
- Issue: 4
- 71
- 3790
- Pages: 12005-12005
Behavior of timber-timber composite structure connected by inclined screws
- Year: 2023
- Issue: 4
- 95
- 3785
- Pages: 12004-12004
Strength and crack-resistance of concrete with fibre fillers and modifying nano-additives
- Year: 2023
- Issue: 3
- 61
- 3877
- Pages: 11909-11909
Numerical buckling calculation method for composite rods with semi-rigid ties
- Year: 2023
- Issue: 3
- 68
- 4687
- Pages: 11904-11904
Hexagonal rod pyramid: deformations and natural oscillation frequency
- Year: 2023
- Issue: 3
- 40
- 4474
- Pages: 11903-11903
Elliptical underground concrete block bridge with minimal weight
- Year: 2023
- Issue: 1
- 72
- 3562
- Pages: 11713-11713
Peculiarities of hydration and frost resistance of cement with natural zeolite additive
- Year: 2023
- Issue: 1
- 60
- 3901
- Pages: 11711-11711
Energy efficiency of underground structures in harsh climatic conditions
- Year: 2023
- Issue: 1
- 82
- 3947
- Pages: 11710-11710
Temperature effects on the design parameters of a geothermal pile
- Year: 2022
- Issue: 8
- 99
- 4152
- Pages: 11606-11606
Influence of the technological foam concrete manufacturing process on its pore structure
- Year: 2022
- Issue: 7
- 64
- 3532
- Pages: 11513-11513
Stress-strain state of CFRD with a decrease in friction at the face-sidewall contact
- Year: 2022
- Issue: 7
- 61
- 3963
- Pages: 11506-11506
Assessment of crack resistance of ultra-high earth core rockfill dam by pore pressure
- Year: 2022
- Issue: 6
- 69
- 4272
- Pages: 11411-11411
The calculation of the dynamic characteristics of the spillway of the dam
- Year: 2022
- Issue: 5
- 109
- 3762
- Pages: 11312-11312
Rubber concrete beams under the action of transverse bending
- Year: 2022
- Issue: 5
- 95
- 5298
- Pages: 11301-11301
Structural performance of corroded RC beams without shear reinforcement
- Year: 2022
- Issue: 4
- 115
- 4246
- Pages: 11211-11211
Combination of additives to characteristics of concrete in marine works
- Year: 2022
- Issue: 4
- 82
- 4512
- Pages: 11204-11204
Analytical estimation of the first natural frequency and analysis of a planar regular truss oscillation spectrum
- Year: 2022
- Issue: 3
- 64
- 4445
- Pages: 11114-11114
Mooring system optimization for marine floating hydrotechnical structures
- Year: 2022
- Issue: 3
- 94
- 4163
- Pages: 11112-11112
Structural health monitoring by merging dynamic response data
- Year: 2022
- Issue: 3
- 77
- 4706
- Pages: 11111-11111
Limit states design theory based on critical energy levels criterion in force method form
- Year: 2022
- Issue: 3
- 100
- 5009
- Pages: 11101-11101
Performance of elastomeric seismic isolators under long-period earthquakes
- Year: 2022
- Issue: 2
- 265
- 5743
- Pages: 11014-11014
The site effect investigation using nonlinear and Iranian seismic code methods in Babol city
- Year: 2022
- Issue: 2
- 50
- 4692
- Pages: 11008-11008
Finite element models based on the approximation of discontinuous stress fields
- Year: 2022
- Issue: 2
- 77
- 5236
- Pages: 11004-11004
Algorithm for building structures optimization based on Lagrangian functions
- Year: 2022
- Issue: 1
- 97
- 5050
- Pages: 10910-10910
Interaction and control measures of shallow-buried shield twin tunnels with small clear-distance
- Year: 2021
- Issue: 8
- 133
- 4536
- Pages: 10801-10801
Arbitrary quadrangular finite element for plates with shear deformations
- Year: 2021
- Issue: 7
- 64
- 4455
- Pages: 10707-10707
Algorithm of correcting bimoments in calculations of thin-walled bar systems
- Year: 2021
- Issue: 7
- 36
- 4378
- Pages: 10706-10706
Methodology for solving parametric optimization problems of steel structures
- Year: 2021
- Issue: 7
- 107
- 5396
- Pages: 10705-10705
Performance of composite connections strengthened with CFRP laminate
- Year: 2021
- Issue: 6
- 97
- 4330
- Pages: 10614-10614
Assessment of wave impact on hydraulic structures of the Flood Prevention Facility Complex of St. Petersburg obtained from field observations
- Year: 2021
- Issue: 5
- 69
- 3972
- Pages: 10510-10510
Ultimate load capacity of high-performance fibre-concrete hollow square columns
- Year: 2021
- Issue: 4
- 77
- 4894
- Pages: 10412-10412
Dynamic tests and monitoring of the dynamic state of buildings and structures based on microseismic vibrations
- Year: 2021
- Issue: 4
- 44
- 4460
- Pages: 10410-10410
The location of supports under the monolithic reinforced concrete slabs optimization
- Year: 2021
- Issue: 4
- 96
- 5689
- Pages: 10404-10404
Pump-hose systems with universal fire barrels for extinguishing buildings
- Year: 2021
- Issue: 3
- 78
- 4422
- Pages: 10305-10302
Elasto-plastic progressive collapse analysis based on the integration of the equations of motion
- Year: 2021
- Issue: 2
- 157
- 5496
- Pages: 10214-10214
Numerical investigation of truss-shaped braces in eccentrically braced steel frames
- Year: 2021
- Issue: 2
- 64
- 5065
- Pages: 10208-10208
Performance of two-way hinges in reinforced concrete structures
- Year: 2021
- Issue: 2
- 143
- 6104
- Pages: 10204-10204
Behavior of light-gauge steel beams filled with recycled concrete
- Year: 2021
- Issue: 1
- 275
- 7820
- Pages: 10102-10102
Frictional contact problem in building constructions analysis
- Year: 2020
- Issue: 8
- 110
- 5454
- Pages: 10001-10001
Flange connections with high-strength bolts with technological heredity of bolts
- Year: 2020
- Issue: 7
- 106
- 5554
- Pages: 9912-9912
Earth pressure reduction on retaining walls using EPS geofoam
- Year: 2020
- Issue: 7
- 151
- 6024
- Pages: 9904-9904
Numerical simulation of concrete dam during heavy rain
- Year: 2020
- Issue: 7
- 125
- 5000
- Pages: 9903-9903
Improved gradient projection method for parametric optimisation of bar structures
- Year: 2020
- Issue: 6
- 66
- 4761
- Pages: 9812-9812
Stress-strain state of Insulated Glass Unit in structural glazing systems
- Year: 2020
- Issue: 6
- 88
- 5791
- Pages: 9808-9808
Stress-strain state of fiber cement cladding within curtain wall system
- Year: 2020
- Issue: 5
- 100
- 4765
- Pages: 9709-9709
Method of plates stability analysis based on the moments approximations
- Year: 2020
- Issue: 3
- 79
- 5432
- Pages: 90-103
Computational modeling of yielding octagonal connection for concentrically braced frames
- Year: 2020
- Issue: 2
- 150
- 5917
- Pages: 31-53
Finite element modeling of cold-formed steel deck in bending
- Year: 2020
- Issue: 2
- 190
- 4948
- Pages: 129-144
Effects of model-based design and loading on responses of base-isolated structures
- Year: 2019
- Issue: 8
- 89
- 5127
- Pages: 142-154
An improved membrane element for high-rise building with shear walls
- Year: 2019
- Issue: 7
- 93
- 4977
- Pages: 121-128
Equilibrium finite elements for plane problems of the elasticity theory
- Year: 2019
- Issue: 7
- 99
- 5751
- Pages: 80-97
Dynamics of a physically nonlinear viscoelastic cylindrical shell with a concentrated mass
- Year: 2019
- Issue: 7
- 92
- 5778
- Pages: 39-48
Modelling of contact interaction of structures with the base under dynamic loading
- Year: 2019
- Issue: 5
- 134
- 5686
- Pages: 167-178
Mixed finite-element method in V.I. Slivker’s semi-shear thin-walled bar theory
- Year: 2019
- Issue: 5
- 171
- 5614
- Pages: 79-93
Factors effecting the recovery process of self-repairing concrete
- Year: 2019
- Issue: 4
- 156
- 5727
- Pages: 52-59
Static accounting of highest modes in problems of structural dynamics
- Year: 2019
- Issue: 4
- 317
- 6715
- Pages: 3-13
Numerical studies of long-wave processes in the reaches of hydrosystems and reservoirs
- Year: 2019
- Issue: 3
- 82
- 4700
- Pages: 123-135
The semi-shear theory of V.I. Slivker for the stability problems of thin-walled bars
- Year: 2019
- Issue: 3
- 139
- 6251
- Pages: 66-79
Destruction of building materials in terms of the method of crystallization in gels
- Year: 2009
- Issue: 3
- 13
- 4072
- Pages: 53-60
The high-quality concretes. The analysis of possibilities and the practical use of nanotechnological methods
- Year: 2009
- Issue: 6
- 50
- 4286
- Pages: 25-33
Ultrasonic method used for the estimation of damage zone in reinforced concrete after the fire
- Year: 2009
- Issue: 7
- 81
- 4966
- Pages: 38-40
Method of constructive anisotropy for the orthotropic and isotropic ribbed shells
- Year: 2009
- Issue: 8
- 15
- 4390
- Pages: 40-46
Numerical simulation of the influence of soil core on the bearing capacity of pipe pile
- Year: 2010
- Issue: 2
- 50
- 4338
- Pages: 27-35
Use features of resistive electrocontact method for control of steel structures deflected mode
- Year: 2010
- Issue: 3
- 29
- 4329
- Pages: 32-34
Monolithic constructions made of light nanoconcrete by the example of 5-story multilayer parking
- Year: 2010
- Issue: 5
- 15
- 4620
- Pages: 12-15
Use of resistive electrocontact method for monitoring of steel constructions state
- Year: 2010
- Issue: 7
- 15
- 4367
- Pages: 21-24
Sliding girt with fluoroplastic for earthquake-proof building
- Year: 2011
- Issue: 3
- 30
- 4922
- Pages: 53-58
Mathematical modelling and calculation of hydraulic engineering constructions such as dam-plate in view of hydrodynamical pressure of water and seismic loading
- Year: 2011
- Issue: 3
- 66
- 5137
- Pages: 59-70
Substantive provisions of Numeral-analytical boundary elements method
- Year: 2011
- Issue: 4
- 15
- 5194
- Pages: 33-39
On the Choice of Concrete Strength Inspection Methods of Ready-built Structures
- Year: 2011
- Issue: 4
- 61
- 5726
- Pages: 10-15
Calculation algorithm of steel-reinforced concrete water passages
- Year: 2011
- Issue: 6
- 24
- 4758
- Pages: 41-49
Working operations of simple technological processes in construction industry ordering
- Year: 2011
- Issue: 7
- 25
- 4369
- Pages: 87-99
Building systems technical condition assessment based on the multilevel probabilistic analysis
- Year: 2011
- Issue: 7
- 17
- 4815
- Pages: 45-51
Monitoring of unique buildings with using of dynamic parameters according to GOST R 53778-2010
- Year: 2011
- Issue: 7
- 28
- 4688
- Pages: 33-39
Test methods of corrosion state of reinforced concrete structures
- Year: 2011
- Issue: 7
- 41
- 4945
- Pages: 18-25
Method of specific energy for determination mechanical characteristics of structural steel
- Year: 2011
- Issue: 7
- 9
- 4900
- Pages: 11-17
Foam concrete of certain average density for thermal insulation of attic floors
- Year: 2011
- Issue: 8
- 24
- 4525
- Pages: 19-24
Strengthening of the beam structures taking into account repair and mounting forcesinfluence
- Year: 2012
- Issue: 1
- 8
- 4533
- Pages: 98-105
Evaluating drainage outflow from residential and industrial areas of North-West Russia
- Year: 2012
- Issue: 4
- 21
- 4514
- Pages: 46-51
Numerical evaluating strength reliability of penstocks under hydraulic hammer
- Year: 2012
- Issue: 6
- 17
- 4578
- Pages: 29-35
Dynamic monitoring of building structures on the example of the concert hall "Pushkinskiy" ramp in Moscow
- Year: 2012
- Issue: 7
- 26
- 4554
- Pages: 58-62
Particularities of chemical modifiers selection for fabricating concrete articles by extrusion technology
- Year: 2012
- Issue: 8
- 12
- 4341
- Pages: 54-60
Addition to the method of dimensional analysis in hydraulic problems
- Year: 2013
- Issue: 2
- 13
- 4445
- Pages: 41-47
About analysis of large problems of structural mechanics on multi-core computers
- Year: 2013
- Issue: 5
- 24
- 4988
- Pages: 116-124
Automated organization production and mounting of glass curtain walls
- Year: 2013
- Issue: 7
- 22
- 4651
- Pages: 58-66
The model of the space-time analogy in the optimization of the renovation order of buildings
- Year: 2013
- Issue: 7
- 21
- 4277
- Pages: 51-57
Settlement and experimental control of energy saving for buildings
- Year: 2013
- Issue: 8
- 13
- 4615
- Pages: 24-30
Universal method for calculation of reliable completion times
- Year: 2016
- Issue: 7
- 30
- 4462
- Pages: 70-80
Non-uniform torsion of thin-walled open-section multi-span beams
- Year: 2016
- Issue: 7
- 66
- 5837
- Pages: 55-69
Stress finite element models for determining the frequencies of free oscillations
- Year: 2016
- Issue: 7
- 35
- 5290
- Pages: 39-54
Experimental Investigation considering the Stressed State of some Essential Constructions of Large Hydropower Buildings
- Year: 2014
- Issue: 1
- 21
- 4559
- Pages: 59-70
Structural Analysis of Buildings at Explosive Actions in SCAD
- Year: 2014
- Issue: 1
- 87
- 5816
- Pages: 12-22
Optional reference method to determine frost resistance of concrete
- Year: 2014
- Issue: 3
- 25
- 5102
- Pages: 71-76
Experimental research and finite element analysis of elastic and strength properties of fiberglass composite material
- Year: 2014
- Issue: 3
- 100
- 5423
- Pages: 25-39
Field measurement of waves for defining loads on marine hydraulic structures
- Year: 2014
- Issue: 4
- 27
- 4836
- Pages: 49-62
Influence of structural parameters of the masonry on effective elastic properties and strength
- Year: 2014
- Issue: 5
- 18
- 4688
- Pages: 95-106
Computer modeling of tasks in dynamics of viscoelastic thinwalled elements in structures of variable thickness
- Year: 2014
- Issue: 5
- 16
- 4572
- Pages: 83-94
Bending, torsion and asymptotic analysis of the cantilever bar
- Year: 2014
- Issue: 5
- 20
- 4660
- Pages: 37-43
Quadrilateral shell finite element for analysis of thin-walled reinforced concrete structures
- Year: 2014
- Issue: 5
- 17
- 4559
- Pages: 27-36
An effective method of explosive compaction of hydraulic structures foundations
- Year: 2014
- Issue: 6
- 12
- 4880
- Pages: 32-39
Application of the variation method to assess stability of waterlogged soil masses
- Year: 2014
- Issue: 6
- 19
- 4867
- Pages: 24-31
Adaptability to manufacture varieties of modern disassembled formwork systems
- Year: 2014
- Issue: 7
- 25
- 4403
- Pages: 80-88
Calculations of strengthened open profile thin-walled element enclosing structures
- Year: 2014
- Issue: 8
- 14
- 4878
- Pages: 49-56
Calculation of optimized methods of the river underwater pipeline backfill with the use of APMWinMachine 9.7
- Year: 2016
- Issue: 5
- 9
- 5338
- Pages: 42-66
Multifactorial forecast of thermal behavior in building envelope elements
- Year: 2014
- Issue: 8
- 33
- 4963
- Pages: 25-37
Analysis of local stability of the rectangular tubes filled with concrete
- Year: 2016
- Issue: 4
- 41
- 4889
- Pages: 59-68
Analysis of the buckling of spatial truss with cross lattice
- Year: 2016
- Issue: 4
- 33
- 5502
- Pages: 52-58
The conference “Inspection of buildings and structures: problems and solutions”
- Year: 2015
- Issue: 6
- 20
- 4782
- Pages: 4-7
Reticular-stretched thermoprofile: a numerical and analytical study
- Year: 2015
- Issue: 5
- 12
- 4996
- Pages: 74-85
Analysis of the deflection of a strut-type lattice girder truss
- Year: 2015
- Issue: 5
- 25
- 5887
- Pages: 58-65
Soil thrust boring plant of static action with ring spacers of horizontal wells
- Year: 2015
- Issue: 2
- 13
- 5063
- Pages: 100-107
Method of initial functions in model of compression linearly deformable layered foundation under normal local load
- Year: 2015
- Issue: 1
- 26
- 5107
- Pages: 91-96
Bending of geometrically nonlinear cantilever beam. Results obtained by Cosserat – Timoshenko and Kirchhoff’s rod theories
- Year: 2015
- Issue: 1
- 170
- 8387
- Pages: 39-55
The exact formulas for calculating deflection and forces in the rods of the ’Molodechno’ truss with an arbitrary number of panels
- Year: 2016
- Issue: 1
- 24
- 5892
- Pages: 33-41
The functional of additional energy for stability analysis of spatial rod systems
- Year: 2017
- Issue: 2
- 31
- 4953
- Pages: 18-32
Design methods of timber-concrete composite ceiling structure
- Year: 2017
- Issue: 5
- 47
- 5530
- Pages: 88-95
Creep behavior of geosynthetics by temperature accelerated testing
- Year: 2017
- Issue: 8
- 40
- 4694
- Pages: 255-265
Flat rod systems: optimization with overall stability control
- Year: 2017
- Issue: 8
- 36
- 5520
- Pages: 181-192
Stress-strain state of three-layered shallow shells under conditions of nonlinear creep
- Year: 2017
- Issue: 8
- 39
- 5314
- Pages: 156-168
Bearing capacity of rafter systems made of steel thin-walled structures in attic roofs
- Year: 2017
- Issue: 8
- 53
- 5473
- Pages: 28-39
Method for noise calculation under specular and diffuse reflection of sound
- Year: 2018
- Issue: 1
- 23
- 5108
- Pages: 13-22
Alternative engineering of steel girder cages by geometrical methods
- Year: 2018
- Issue: 2
- 66
- 4917
- Pages: 3-15
Min-cut algorithm for network schedule by merging the vertices
- Year: 2018
- Issue: 4
- 16
- 4381
- Pages: 37-47
Reliability assessment of the construction schedule by the critical chain method
- Year: 2018
- Issue: 5
- 182
- 5689
- Pages: 25-31
Heating and charring of timber constructions with thin-layer fire protection
- Year: 2018
- Issue: 5
- 60
- 4970
- Pages: 3-14
Optimization of hybrid I-beams using modified particle swarm method
- Year: 2018
- Issue: 7
- 38
- 4842
- Pages: 175-185
Suspension structure with cross-laminated timber deck panels
- Year: 2018
- Issue: 7
- 47
- 5629
- Pages: 126-132
Stress-strain behavior of welded joints in railway girders
- Year: 2018
- Issue: 8
- 48
- 4492
- Pages: 119-129
Additional load on barrel vaults of architectural monuments
- Year: 2018
- Issue: 8
- 39
- 8102
- Pages: 15-28