Publication schedule
-
№2 April 2023
-
№3 May 2023
-
№4 July 2023
Articles by keywords "concrete"
High-performance concrete produced with locally available materials
- Year: 2023
- Issue: 1
- 43
- 273
- Pages: 11702-11702
Elliptical underground concrete block bridge with minimal weight
- Year: 2023
- Issue: 1
- 19
- 205
- Pages: 11713-11713
Peculiarities of hydration and frost resistance of cement with natural zeolite additive
- Year: 2023
- Issue: 1
- 10
- 208
- Pages: 11711-11711
Size effect of cube specimen on strength of expanded clay fiber-reinforced concrete
- Year: 2022
- Issue: 8
- 44
- 286
- Pages: 11612-11612
Feasibility of concrete mixtures containing coarse and/or fine recycled brick aggregates
- Year: 2022
- Issue: 8
- 56
- 294
- Pages: 11603-11603
Seismic damage mechanism of weak beam-column joint frames
- Year: 2022
- Issue: 8
- 67
- 392
- Pages: 11601-11601
Compressive strength prediction model of lightweight high-strength concrete
- Year: 2022
- Issue: 7
- 43
- 366
- Pages: 11512-11512
Durable concrete in sewerage using non-grinded rice husk ash and water-permeable mould
- Year: 2022
- Issue: 7
- 20
- 388
- Pages: 11511-11511
High performance lightweight concretes for 3D printing
- Year: 2022
- Issue: 7
- 38
- 346
- Pages: 11510-11510
Stress-strain state of CFRD with a decrease in friction at the face-sidewall contact
- Year: 2022
- Issue: 7
- 38
- 330
- Pages: 11506-11506
Complex modified additive for concrete based on industrial waste
- Year: 2022
- Issue: 7
- 29
- 307
- Pages: 11507-11507
High-performance fine-grained nanostructured concrete based on low strength aggregates
- Year: 2022
- Issue: 6
- 33
- 438
- Pages: 11413-11413
Bond testing of salty-sand concrete reinforced with different rebars
- Year: 2022
- Issue: 6
- 60
- 501
- Pages: 11407-11407
Fracture characteristics of high-performance concrete using nano-silica
- Year: 2022
- Issue: 6
- 32
- 587
- Pages: 11402-11402
Blended binder based on Portland cement and recycled concrete powder
- Year: 2022
- Issue: 5
- 53
- 584
- Pages: 11306-11306
The calculation of the dynamic characteristics of the spillway of the dam
- Year: 2022
- Issue: 5
- 56
- 515
- Pages: 11312-11312
Thermal stresses at the early stage of the hardening of steel-fiber reinforced concrete
- Year: 2022
- Issue: 5
- 40
- 497
- Pages: 11304-11304
Aerated dry mix concrete for remote northern territories
- Year: 2022
- Issue: 5
- 26
- 472
- Pages: 11310-11310
Impact of pond ash as fine aggregate on mechanical and microstructural properties of geopolymer concrete
- Year: 2022
- Issue: 5
- 48
- 513
- Pages: 11305-11305
Metamorphic rocks for manufactured sand and coarse aggregate for concrete and mortar
- Year: 2022
- Issue: 5
- 36
- 599
- Pages: 11308-11308
Energy performance of buildings made of textile-reinforced concrete (TRC) sandwich panels
- Year: 2022
- Issue: 5
- 48
- 539
- Pages: 11303-11303
Rubber concrete beams under the action of transverse bending
- Year: 2022
- Issue: 5
- 61
- 621
- Pages: 11301-11301
Structural performance of corroded RC beams without shear reinforcement
- Year: 2022
- Issue: 4
- 69
- 689
- Pages: 11211-11211
Flexural behavior of 60 m UHPC pre-stressed box girder
- Year: 2022
- Issue: 4
- 61
- 756
- Pages: 11212-11212
High-strength steel effects on the behavior of special shear walls
- Year: 2022
- Issue: 3
- 42
- 602
- Pages: 11102-11102
Behavior of heat damaged reinforced recycled aggregate concrete beams repaired with NSM-CFRP strips
- Year: 2022
- Issue: 3
- 42
- 766
- Pages: 11106-11106
Performance improvement model of cement pavement in seasonal-frost regions
- Year: 2022
- Issue: 3
- 36
- 683
- Pages: 11108-11108
Flexural behavior of partially composite concrete-encased steel tubular beams
- Year: 2022
- Issue: 3
- 52
- 659
- Pages: 11105-11105
Production of Portland cement using fluorine gypsum – hydrofluoric acid waste
- Year: 2022
- Issue: 3
- 34
- 655
- Pages: 11113-11113
Nanostructured high-performance concretes based on low-strength aggregates
- Year: 2022
- Issue: 2
- 66
- 730
- Pages: 11015-11015
Application of artificial neural networks for prediction of concrete properties
- Year: 2022
- Issue: 2
- 52
- 740
- Pages: 11007-11007
Impact of elevated temperature on the shear behavior of strengthened RC beams
- Year: 2022
- Issue: 2
- 68
- 709
- Pages: 11002-11002
Lightweight concrete for 3D-printing with internal curing agent for Portland cement hydration
- Year: 2022
- Issue: 1
- 90
- 903
- Pages: 10915-10915
Different types of basalt fibers for disperse reinforcing of fine-grained concrete
- Year: 2022
- Issue: 1
- 63
- 1008
- Pages: 10913-10913
The strength of fly ash concrete of experimental design
- Year: 2022
- Issue: 1
- 82
- 964
- Pages: 10911-10911
Influence of cement type and chemical admixtures on the durability of recycled concrete aggregates
- Year: 2022
- Issue: 1
- 103
- 914
- Pages: 10908-10908
Humidity regime in aerated concrete wall with finishing coating
- Year: 2022
- Issue: 1
- 37
- 783
- Pages: 10907-10907
The shear behavior of Anchored CFRP Strengthened RC beams
- Year: 2022
- Issue: 1
- 53
- 878
- Pages: 10905-10905
Deformation criteria for reinforced concrete frames under accidental actions
- Year: 2022
- Issue: 1
- 249
- 1306
- Pages: 10902-10902
Differential characteristics of concrete in centrifugally spun and vibrospun building structures
- Year: 2021
- Issue: 8
- 72
- 1065
- Pages: 10812-10812
Properties of recycled aggregate pervious concrete modified with Styrene Butadiene Rubber Latex
- Year: 2021
- Issue: 8
- 62
- 867
- Pages: 10805-10805
Physical and mechanical properties of construction and demolition waste
- Year: 2021
- Issue: 8
- 86
- 953
- Pages: 10804-10804
Isotropic damage model to simulate failure in reinforced concrete beam
- Year: 2021
- Issue: 7
- 38
- 1202
- Pages: 10714-10714
Self-healing in cementitious composite containing bacteria and protective polymers at various temperatures
- Year: 2021
- Issue: 7
- 33
- 1393
- Pages: 10713-10713
Properties of fine-grained concrete containing fly ash and bottom ash
- Year: 2021
- Issue: 7
- 72
- 1063
- Pages: 10711-10711
Performance of structurally viable green concrete derived from natural Pozzolan and Nanosilica
- Year: 2021
- Issue: 7
- 42
- 808
- Pages: 10710-10710
Flexural properties of hogweed chips reinforced cement composites
- Year: 2021
- Issue: 7
- 31
- 1393
- Pages: 10709-10709
Ultra high-performance fiber reinforced concrete panel subjected to high velocity impact
- Year: 2021
- Issue: 7
- 95
- 856
- Pages: 10703-10703
Technogenic anhydrite binder for high-strength concrete
- Year: 2021
- Issue: 7
- 43
- 740
- Pages: 10701-10701
Layer model of elasticity modulus prediction for lightweight concretes
- Year: 2021
- Issue: 6
- 38
- 1475
- Pages: 10611-10611
Performance of composite connections strengthened with CFRP laminate
- Year: 2021
- Issue: 6
- 87
- 891
- Pages: 10614-10614
Impact of elevated temperature on the behavior of strengthened RC beams with CFRP
- Year: 2021
- Issue: 6
- 23
- 722
- Pages: 10612-10612
The combination of bamboo grid and concrete pile as soil reinforcement under the embankment
- Year: 2021
- Issue: 6
- 46
- 1467
- Pages: 10610-10610
Performance investigation of demolition wastes-based concrete composites
V.S. Lesovik
A.A. Ahmed
R.S. Fediuk
B. Kozlenko
Y.H. Mugahed Amran
A.Kh. Alaskhanov
M.A. Asaad
G. Murali
V.A. Uvarov
- Year: 2021
- Issue: 6
- 49
- 943
- Pages: 10608-10608
Nanomodified rejuvenators and protective materials for asphalt concrete
- Year: 2021
- Issue: 6
- 37
- 853
- Pages: 10607-10607
Porosity of autoclave aerated concrete and foam concrete: origin of porosity and pore size
- Year: 2021
- Issue: 6
- 73
- 1535
- Pages: 10606-10606
Composite non-autoclaved aerated concrete based on an emulsion
- Year: 2021
- Issue: 6
- 38
- 1486
- Pages: 10605-10605
Behavior of composite steel plate-sustainable concrete slabs under impact loading
- Year: 2021
- Issue: 6
- 45
- 1483
- Pages: 10604-10604
A deformed state of the composite frame with phased installation
- Year: 2021
- Issue: 5
- 35
- 934
- Pages: 10512-10512
Impact resistance of steel fiber-reinforced self-compacting concrete
- Year: 2021
- Issue: 5
- 80
- 1164
- Pages: 10504-10504
Effect of sawdust ash and laterite on the electrical resistivity of concrete
- Year: 2021
- Issue: 5
- 88
- 1083
- Pages: 10502-10502
The impact of depth on shear behavior of strengthened beams
- Year: 2021
- Issue: 5
- 90
- 1638
- Pages: 10501-10501
Elasticity modulus of cement composites predicting using layer structure model
- Year: 2021
- Issue: 4
- 59
- 1291
- Pages: 10413-10413
Ultimate load capacity of high-performance fibre-concrete hollow square columns
- Year: 2021
- Issue: 4
- 65
- 1401
- Pages: 10412-10412
Freeze-thaw damage model for cement pavements in seasonal frost regions
- Year: 2021
- Issue: 4
- 72
- 1302
- Pages: 10406-10406
The location of supports under the monolithic reinforced concrete slabs optimization
- Year: 2021
- Issue: 4
- 78
- 1169
- Pages: 10404-10404
Homogeneous pore distribution in foam concrete by two-stage foaming
R.E. Lukpanov
D. Dyussembinov
Ye.B. Utepov
D.O. Bazarbayev
D.V. Tsygulyov
S.B. Yenkebayev
Zh.A. Shakhmov
- Year: 2021
- Issue: 3
- 63
- 1536
- Pages: 10313-10313
Modeling the influence of input factors on foam concrete properties
- Year: 2021
- Issue: 3
- 94
- 1288
- Pages: 10311-10310
Composition and properties of cement system with glutaraldehyde
- Year: 2021
- Issue: 3
- 44
- 1296
- Pages: 10307-10307
Mechanical safety of reinforced concrete frames under complex emergency actions
- Year: 2021
- Issue: 3
- 104
- 1344
- Pages: 10306-10306
Reinforced concrete beams strength under power and environmental influences
- Year: 2021
- Issue: 3
- 233
- 1814
- Pages: 10303-10303
Elasto-plastic progressive collapse analysis based on the integration of the equations of motion
- Year: 2021
- Issue: 2
- 111
- 1513
- Pages: 10214-10214
Low-heat steaming treatment of concrete with polycarboxylate superplasticizers
- Year: 2021
- Issue: 2
- 39
- 1250
- Pages: 10213-10213
Tendencies in developing structural designs of non-soil seepage-control structures of embankment dams
- Year: 2021
- Issue: 2
- 73
- 1223
- Pages: 10212-10212
Heat release and thermal conductivity of expanded-clay concrete for 3D printer
- Year: 2021
- Issue: 2
- 69
- 1690
- Pages: 10210-10210
Structure and properties of mortar printed on a 3D printer
- Year: 2021
- Issue: 2
- 103
- 1543
- Pages: 10206-10206
Performance of two-way hinges in reinforced concrete structures
- Year: 2021
- Issue: 2
- 123
- 1835
- Pages: 10204-10204
Stochastic model of the construction process implemented with application of sliding formwork
- Year: 2021
- Issue: 1
- 62
- 1285
- Pages: 10111-10111
Silica concrete compressive behavior under alternating magnetic field
- Year: 2021
- Issue: 1
- 85
- 1398
- Pages: 10112-10112
Strength of concrete columns reinforced with Glass fiber reinforced polymer
- Year: 2021
- Issue: 1
- 113
- 1744
- Pages: 10108-10108
Basalt fiber reinforced expanded clay concrete for building structures
- Year: 2021
- Issue: 1
- 132
- 1847
- Pages: 10107-10107
Predicting creep deformation of asphalts modified with polymer using artificial neural networks
- Year: 2021
- Issue: 1
- 88
- 1427
- Pages: 10106-10106
Bond strength in PVA fibre reinforced fly ash-based geopolymer concrete
- Year: 2021
- Issue: 1
- 120
- 1639
- Pages: 10105-10105
Sodium alginate emulsions for asphalt concrete modifiers encapsulating: structural rheological properties
- Year: 2021
- Issue: 1
- 78
- 1260
- Pages: 10104-10104
Behavior of light-gauge steel beams filled with recycled concrete
- Year: 2021
- Issue: 1
- 257
- 3604
- Pages: 10102-10102
Influence of raw greywater on compressive strength of concrete
- Year: 2020
- Issue: 8
- 70
- 1477
- Pages: 10010-10010
Effect of sorption moisture content of heavy concrete on radon emanation
- Year: 2020
- Issue: 8
- 39
- 1199
- Pages: 10007-10007
Distribution of corrosion products at the steel-concrete interface of XD3 concrete samples
- Year: 2020
- Issue: 8
- 43
- 1278
- Pages: 10005-10005
The influence of reinforcing joints on the fire resistance of reinforced concrete structures
- Year: 2020
- Issue: 8
- 118
- 1499
- Pages: 10004-10004
Durability behaviors of foam concrete made of binder composites
V.S. Lesovik
E.S. Glagolev
V.V. Voronov
L.Kh. Zagorodnyuk
R.S. Fediuk
A. Baranov
A.Kh. Alaskhanov
A.P. Svintsov
- Year: 2020
- Issue: 8
- 83
- 1441
- Pages: 10003-10003
The effect of formworks on the temperature regime in the mass concrete
- Year: 2020
- Issue: 7
- 82
- 1395
- Pages: 9911-9911
Antiskid prediction model for cement pavements in seasonal frost regions
- Year: 2020
- Issue: 6
- 74
- 1361
- Pages: 9807-9807
Effect of multicomponent modifier on the properties of cement pastes formulated from self-compacting concrete
- Year: 2020
- Issue: 6
- 59
- 1485
- Pages: 9805-9805
Theory of determining the frequency of natural oscillations of span structures
- Year: 2020
- Issue: 6
- 64
- 1427
- Pages: 9803-9803
Behavior of CFRP strengthened columns damaged by thermal shock
- Year: 2020
- Issue: 5
- 43
- 1231
- Pages: 9708-9708
Stress-strain state of the precast monolithic bent element
- Year: 2020
- Issue: 5
- 40
- 1320
- Pages: 9706-9706