Articles from section "Building Materials"

Thermal conductivity reduction and acoustic insulation enhancement in nanosilica-modified lightweight porcelanite concrete

Building Materials
  • Year: 2025
  • Volume: 18
  • Issue: 5
  • 61
  • 248
  • Pages: 13703-13703

Exploring the potential of calcined montmorillonite-kaolinite clay with medium percentage of clay minerals for low-carbon cements

Building Materials
  • Year: 2025
  • Volume: 18
  • Issue: 5
  • 46
  • 230
  • Pages: 13705-13705

Effectiveness of wax additives in cast asphalt concrete mixtures

Building Materials
  • Year: 2025
  • Volume: 18
  • Issue: 4
  • 81
  • 504
  • Pages: 13607-13607

The effect of using internal curing on chloride penetration of self-compacting concrete

Building Materials
  • Year: 2025
  • Volume: 18
  • Issue: 4
  • 78
  • 476
  • Pages: 13606-13606

Production of glass-alkali binder for construction purposes by recycling of cullet

Building Materials
  • Year: 2025
  • Volume: 18
  • Issue: 4
  • 91
  • 530
  • Pages: 13602-13602

Early and long-term performance of green mortar made from the waste of electrical cables

Building Materials
  • Year: 2025
  • Volume: 18
  • Issue: 4
  • 141
  • 759
  • Pages: 13601-13601

Granular aggregate for fill mortars using blast furnace slag

Building Materials
  • Year: 2025
  • Volume: 18
  • Issue: 2
  • 156
  • 3077
  • Pages: 13405-13405

Analysis of rheological model parameters for various foamed vibration-damping materials

Building Materials
  • Year: 2025
  • Volume: 18
  • Issue: 2
  • 138
  • 3202
  • Pages: 13403-13403

Aluminum surface treatment for shear strength improvement of the laminate composites

Building Materials
  • Year: 2025
  • Volume: 18
  • Issue: 1
  • 55
  • 3067
  • Pages: 13307-13307

Influence of electric current on the mineral matrix of technogenic anhydrite

Building Materials
  • Year: 2025
  • Volume: 18
  • Issue: 1
  • 137
  • 3249
  • Pages: 13302-13302

Correlation model for cost and technical characteristics of thermal insulation material used in enclosing structure

Building Materials
  • Year: 2025
  • Volume: 18
  • Issue: 1
  • 103
  • 3149
  • Pages: 13306-13306

Ensuring uniform brightness of the afterglow surface of the hardened cement paste with photoluminescent pigment

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 8
  • 68
  • 3112
  • Pages: 13208-13208

Electrically conductive cement composites modified with weakly oxidized graphene

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 8
  • 69
  • 3407
  • Pages: 13203-13203

Strength and thermal conductivity properties of thermowood-cement composition

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 7
  • 53
  • 2712
  • Pages: 13107-13107

Ground granulated blast furnace slag and fly ash concrete

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 7
  • 93
  • 2701
  • Pages: 13103-13103

Autogenous shrinkage and early cracking of massive foundation slabs

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 6
  • 86
  • 2395
  • Pages: 13005-13005

Ultrasonic characterization of damage induced by temperature variations in concrete medium treated with nanosilica

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 5
  • 61
  • 2183
  • Pages: 12907-12907

Effect of nanosilica on properties of porcelanite aggregate concrete

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 5
  • 71
  • 2357
  • Pages: 12905-12905

Influence of silica fume addition on enhancing the autoclaved aerated concrete properties

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 4
  • 37
  • 2536
  • Pages: 12808-12808

Fire flame effect on some properties of hybrid fiber reinforced LECA lightweight self-compacting concrete

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 4
  • 33
  • 2527
  • Pages: 12806-12806

Lightweight concrete containing recycled aggregates

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 4
  • 116
  • 2762
  • Pages: 12804-12804

Non-combustible composite materials for fire curtains: thermal analysis and microscopy

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 3
  • 67
  • 2940
  • Pages: 12705-12705

Obtaining and using synthetic fluorite for Portland cement clinker production

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 3
  • 60
  • 2859
  • Pages: 12703-12703

Mechanical behavior and eco-efficiency of sisal fiber reinforced cement composites containing husk rice ash

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 3
  • 130
  • 2962
  • Pages: 12702-12702

Composite cement materials for structures foundation strengthening

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 3
  • 199
  • 3433
  • Pages: 12701-12701

The temperature nomogram to predict the maximum temperature in mass concrete

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 2
  • 55
  • 2790
  • Pages: 12605-12605

Application of fractal analysis to assess the quality of the appearance of paint and varnish coatings

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 2
  • 67
  • 2478
  • Pages: 12608-12608

Corrosion-resistant concretes for coastal underground structures

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 2
  • 84
  • 2960
  • Pages: 12606-12606

Enhancing lightweight concrete strength through modified zeolite-alkaline porous aggregate: composition optimization and structural application

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 1
  • 107
  • 3238
  • Pages: 12507-12507

Bearing capacity of steel-reinforced concrete floor elements before the operation period

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 1
  • 184
  • 3100
  • Pages: 12501-12501

Increasing the level of aging stability of bitumes modified by kaolinite

Building Materials
  • Year: 2023
  • Issue: 8
  • 42
  • 2309
  • Pages: 12413-12413

Concrete heat liberation in thermal stressed state analysis

Building Materials
  • Year: 2023
  • Issue: 8
  • 62
  • 2823
  • Pages: 12409-12409

Properties of grey marl bricks with additions of rice husks

Building Materials
  • Year: 2023
  • Issue: 8
  • 59
  • 2701
  • Pages: 12407-12407

Radiation changes in hardened Portland cement paste under the influence of gamma radiation

Building Materials
  • Year: 2023
  • Issue: 8
  • 74
  • 2942
  • Pages: 12403-12403

Cementless binder based on high-calcium fly ash with calcium nitrate additive

Building Materials
  • Year: 2023
  • Issue: 8
  • 88
  • 2884
  • Pages: 12405-12405

Self-compacting concrete with finely dispersed additives and superplasticizer

Building Materials
  • Year: 2023
  • Issue: 7
  • 273
  • 3569
  • Pages: 12306-12306

Cementless binder consisting of high-calcium fly ash, silica fume and magnesium chloride

Building Materials
  • Year: 2023
  • Issue: 7
  • 220
  • 3053
  • Pages: 12305-12305

Self-healing concrete utilizing low calcium fly ash, recycled aggregate, and macro synthetic fibers: autogenous behavior and properties

Building Materials
  • Year: 2023
  • Issue: 7
  • 261
  • 3438
  • Pages: 12302-12302

Performance of aluminium shaving waste and silica fume blended mortar

Building Materials
  • Year: 2023
  • Issue: 6
  • 47
  • 2621
  • Pages: 12209-12209

Mechanical and microstructural properties of self-healing concrete based on Hay Bacillus

Building Materials
  • Year: 2023
  • Issue: 6
  • 59
  • 3433
  • Pages: 12204-12204

Alkali-activated bentonite clay-limestone cements

Building Materials
  • Year: 2023
  • Issue: 6
  • 50
  • 2754
  • Pages: 12206-12206

Heat-conducting and dielectric characteristics of polyorganosiloxane composites

Building Materials
  • Year: 2023
  • Issue: 6
  • 37
  • 2812
  • Pages: 12203-12203

Structural behavior of concrete arches reinforced with glass textiles

Building Materials
  • Year: 2023
  • Issue: 6
  • 86
  • 3509
  • Pages: 12202-12202

Processes of foaming and formation of the structure of porous glass ceramics from siliceous rocks

Building Materials
  • Year: 2023
  • Issue: 5
  • 58
  • 2953
  • Pages: 12109-12109

Shrinkage of ultra-high performance concrete with superabsorbent polymers

Building Materials
  • Year: 2023
  • Issue: 5
  • 73
  • 3321
  • Pages: 12108-12108

Structural and phase features of ceramics from loam and incinerated sewage sludge ash

Building Materials
  • Year: 2023
  • Issue: 5
  • 45
  • 2840
  • Pages: 12110-12110

High-strength building ceramics based on fly ash – red mud mixtures

Building Materials
  • Year: 2023
  • Issue: 5
  • 103
  • 3232
  • Pages: 12104-12104

Phase structure of cement pastes with antifreeze agents

Building Materials
  • Year: 2023
  • Issue: 4
  • 41
  • 3459
  • Pages: 12007-12007

Strength and crack-resistance of concrete with fibre fillers and modifying nano-additives

Building Materials
  • Year: 2023
  • Issue: 3
  • 58
  • 3163
  • Pages: 11909-11909

Effect of external facing vapor permeability on humidification of facade materials

Building Materials
  • Year: 2023
  • Issue: 3
  • 32
  • 3106
  • Pages: 11909-11909

Strength properties of raw wood after a wildfire

Building Materials
  • Year: 2023
  • Issue: 3
  • 58
  • 3171
  • Pages: 11907-11907

Sulfate corrosion resistance of foundation concrete with nano-particles

Building Materials
  • Year: 2023
  • Issue: 3
  • 76
  • 3491
  • Pages: 11901-11901

Heavy-weight concrete with increased early strength

Building Materials
  • Year: 2023
  • Issue: 2
  • 61
  • 2961
  • Pages: 11809-11809

Influence of biological additives on the properties of cement systems

Building Materials
  • Year: 2023
  • Issue: 2
  • 67
  • 4039
  • Pages: 11803-11803

Performance of waste foundry sand concrete in sulfate environment

Building Materials
  • Year: 2023
  • Issue: 2
  • 75
  • 3294
  • Pages: 11801-11801

Long-term strength and porosity of mortars based on ettringite binder

Building Materials
  • Year: 2023
  • Issue: 2
  • 78
  • 3309
  • Pages: 11802-11802

High-performance concrete produced with locally available materials

Building Materials
  • Year: 2023
  • Issue: 1
  • 135
  • 4494
  • Pages: 11702-11702

Diagnostics and reconstruction of bearing units

Building Materials
  • Year: 2023
  • Issue: 1
  • 42
  • 3155
  • Pages: 11705-11705

Peculiarities of hydration and frost resistance of cement with natural zeolite additive

Building Materials
  • Year: 2023
  • Issue: 1
  • 60
  • 3288
  • Pages: 11711-11711

Charcoal-containing building materials for electromagnetic radiation shielding

Building Materials
  • Year: 2023
  • Issue: 1
  • 50
  • 3487
  • Pages: 11709-11709

Mineral additive for lime dry building mixtures

Building Materials
  • Year: 2023
  • Issue: 1
  • 48
  • 3580
  • Pages: 11707-11707

Anorthite-based building ceramics

Building Materials
  • Year: 2023
  • Issue: 1
  • 56
  • 3394
  • Pages: 11706-11706

Processing, characterization and hardening mechanism of one-part geopolymer cement

Building Materials
  • Year: 2022
  • Issue: 8
  • 53
  • 2777
  • Pages: 11611-11611

Size effect of cube specimen on strength of expanded clay fiber-reinforced concrete

Building Materials
  • Year: 2022
  • Issue: 8
  • 74
  • 2940
  • Pages: 11612-11612

Intumescent compounds for fireproofing of polymer pipelines

Building Materials
  • Year: 2022
  • Issue: 8
  • 41
  • 3245
  • Pages: 11607-11607

Porous glass ceramics from siliceous rocks with high operating temperature

Building Materials
  • Year: 2022
  • Issue: 8
  • 77
  • 3103
  • Pages: 11615-11615

Iraqi bentonite as natural pozzolan

Building Materials
  • Year: 2022
  • Issue: 8
  • 52
  • 3772
  • Pages: 11604-11604

Feasibility of concrete mixtures containing coarse and/or fine recycled brick aggregates

Building Materials
  • Year: 2022
  • Issue: 8
  • 93
  • 3169
  • Pages: 11603-11603

Structure and properties of cement systems with additives of calcined clay and carbonate rocks

Building Materials
  • Year: 2022
  • Issue: 8
  • 103
  • 4040
  • Pages: 11602-11602

Influence of NaOH-concentration and blast-furnace-slag on the properties of geopolymer mortars

Building Materials
  • Year: 2022
  • Issue: 7
  • 73
  • 3463
  • Pages: 11514-11514

Influence of the technological foam concrete manufacturing process on its pore structure

Building Materials
  • Year: 2022
  • Issue: 7
  • 64
  • 2916
  • Pages: 11513-11513

Durable concrete in sewerage using non-grinded rice husk ash and water-permeable mould

Building Materials
  • Year: 2022
  • Issue: 7
  • 36
  • 3343
  • Pages: 11511-11511

High performance lightweight concretes for 3D printing

Building Materials
  • Year: 2022
  • Issue: 7
  • 117
  • 3599
  • Pages: 11510-11510

Complex modified additive for concrete based on industrial waste

Building Materials
  • Year: 2022
  • Issue: 7
  • 53
  • 3058
  • Pages: 11507-11507

Water treatment residue and coal fly ash geopolymers

Building Materials
  • Year: 2022
  • Issue: 7
  • 89
  • 4286
  • Pages: 11503-11503

Comparative feasibility analysis of fly ash bricks, clay bricks and fly ash incorporated clay bricks

Building Materials
  • Year: 2022
  • Issue: 7
  • 123
  • 4335
  • Pages: 11502-11502

High-performance fine-grained nanostructured concrete based on low strength aggregates

Building Materials
  • Year: 2022
  • Issue: 6
  • 50
  • 3296
  • Pages: 11413-11413

Functional indium oxide-based thin-film coatings with variable light transmission

Building Materials
  • Year: 2022
  • Issue: 6
  • 51
  • 3109
  • Pages: 11410-11410

Bond testing of salty-sand concrete reinforced with different rebars

Building Materials
  • Year: 2022
  • Issue: 6
  • 102
  • 3865
  • Pages: 11407-11407

Influence of electromagnetic field on characteristics of crushed materials

Building Materials
  • Year: 2022
  • Issue: 6
  • 46
  • 3242
  • Pages: 11408-11408

Fracture characteristics of high-performance concrete using nano-silica

Building Materials
  • Year: 2022
  • Issue: 6
  • 63
  • 3952
  • Pages: 11402-11402

Blended binder based on Portland cement and recycled concrete powder

Building Materials
  • Year: 2022
  • Issue: 5
  • 93
  • 4190
  • Pages: 11306-11306

Magnesia cement in the MgO-CO2-H2O system

Building Materials
  • Year: 2022
  • Issue: 5
  • 48
  • 3208
  • Pages: 11311-11311

Aerated dry mix concrete for remote northern territories

Building Materials
  • Year: 2022
  • Issue: 5
  • 40
  • 3070
  • Pages: 11310-11310

Impact of pond ash as fine aggregate on mechanical and microstructural properties of geopolymer concrete

Building Materials
  • Year: 2022
  • Issue: 5
  • 86
  • 3747
  • Pages: 11305-11305

Metamorphic rocks for manufactured sand and coarse aggregate for concrete and mortar

Building Materials
  • Year: 2022
  • Issue: 5
  • 63
  • 4702
  • Pages: 11308-11308

Fluorоanhydrite based composites with the thermoplastic additive

Building Materials
  • Year: 2022
  • Issue: 4
  • 59
  • 3402
  • Pages: 11210-11210

Cement grinding aid based on glycerol-waste antifreeze

Building Materials
  • Year: 2022
  • Issue: 4
  • 57
  • 3245
  • Pages: 11214-11214

Effect of Na+ on hydration degree of alkali activated metakaolin polymer

Building Materials
  • Year: 2022
  • Issue: 4
  • 45
  • 3702
  • Pages: 11208-11208

Mechanical properties of ceramic powder based geopolymer mortars

Building Materials
  • Year: 2022
  • Issue: 4
  • 93
  • 3609
  • Pages: 11207-11207

Combination of additives to characteristics of concrete in marine works

Building Materials
  • Year: 2022
  • Issue: 4
  • 79
  • 3739
  • Pages: 11204-11204

Fine-grained cement-ash concrete for 3D-printing

Building Materials
  • Year: 2022
  • Issue: 4
  • 70
  • 3846
  • Pages: 11203-11203

Bearing capacity of riveted connections of mineral wool sandwich panels

Building Materials
  • Year: 2022
  • Issue: 4
  • 68
  • 3639
  • Pages: 11202-11202

Phase composition of belite cements of increased hydraulic activity

Building Materials
  • Year: 2022
  • Issue: 4
  • 69
  • 3291
  • Pages: 11201-11201

The clay rocks properties for the production of the ceramic bricks

Building Materials
  • Year: 2022
  • Issue: 3
  • 83
  • 4091
  • Pages: 11104-11104

3D-printable artificial marble

Building Materials
  • Year: 2022
  • Issue: 3
  • 66
  • 3394
  • Pages: 11115-11115

Production of Portland cement using fluorine gypsum – hydrofluoric acid waste

Building Materials
  • Year: 2022
  • Issue: 3
  • 82
  • 3796
  • Pages: 11113-11113

Nanostructured high-performance concretes based on low-strength aggregates

Building Materials
  • Year: 2022
  • Issue: 2
  • 75
  • 3380
  • Pages: 11015-11015

Belite-containing clinkers from phosphoric slags for refractory materials

Building Materials
  • Year: 2022
  • Issue: 2
  • 36
  • 3100
  • Pages: 11010-11010

Lightweight concrete for 3D-printing with internal curing agent for Portland cement hydration

Building Materials
  • Year: 2022
  • Issue: 1
  • 131
  • 3829
  • Pages: 10915-10915

Different types of basalt fibers for disperse reinforcing of fine-grained concrete

Building Materials
  • Year: 2022
  • Issue: 1
  • 88
  • 3874
  • Pages: 10913-10913

Effect of ferronickel slag in concrete and mortar

Building Materials
  • Year: 2022
  • Issue: 1
  • 124
  • 4677
  • Pages: 10909-10909

Influence of cement type and chemical admixtures on the durability of recycled concrete aggregates

Building Materials
  • Year: 2022
  • Issue: 1
  • 132
  • 3921
  • Pages: 10908-10908

Humidity regime in aerated concrete wall with finishing coating

Building Materials
  • Year: 2022
  • Issue: 1
  • 53
  • 4356
  • Pages: 10907-10907

Factors and mechanisms of nanomodification cement systems in the technological life cycle

Building Materials
  • Year: 2022
  • Issue: 1
  • 50
  • 4475
  • Pages: 10906-10906

Long–term behavior of composite steel plate-concrete slabs incorporating waste plastic fibers

Building Materials
  • Year: 2022
  • Issue: 1
  • 42
  • 3835
  • Pages: 10904-10904

Waste iron powder as aggregate and binder in mortar production

Building Materials
  • Year: 2021
  • Issue: 8
  • 68
  • 3820
  • Pages: 10810-10810

Mechanical properties of slag sand mixture used in road pavements

Building Materials
  • Year: 2021
  • Issue: 8
  • 85
  • 3905
  • Pages: 10806-10806

Properties of recycled aggregate pervious concrete modified with Styrene Butadiene Rubber Latex

Building Materials
  • Year: 2021
  • Issue: 8
  • 90
  • 4276
  • Pages: 10805-10805

Improvement of mechanical characteristics of mortar by using of wollastonite

Building Materials
  • Year: 2021
  • Issue: 7
  • 57
  • 3482
  • Pages: 10715-10715

Self-healing in cementitious composite containing bacteria and protective polymers at various temperatures

Building Materials
  • Year: 2021
  • Issue: 7
  • 55
  • 4084
  • Pages: 10713-10713

Properties of fine-grained concrete containing fly ash and bottom ash

Building Materials
  • Year: 2021
  • Issue: 7
  • 106
  • 3962
  • Pages: 10711-10711

Performance of structurally viable green concrete derived from natural Pozzolan and Nanosilica

Building Materials
  • Year: 2021
  • Issue: 7
  • 69
  • 3572
  • Pages: 10710-10710

Flexural properties of hogweed chips reinforced cement composites

Building Materials
  • Year: 2021
  • Issue: 7
  • 47
  • 4280
  • Pages: 10709-10709

Technogenic anhydrite binder for high-strength concrete

Building Materials
  • Year: 2021
  • Issue: 7
  • 51
  • 3518
  • Pages: 10701-10701

Layer model of elasticity modulus prediction for lightweight concretes

Building Materials
  • Year: 2021
  • Issue: 6
  • 46
  • 4185
  • Pages: 10611-10611

The dependence of the gathering characteristics of nanocarbon cement on the parameters of its production process

Building Materials
  • Year: 2021
  • Issue: 6
  • 41
  • 3296
  • Pages: 10615-10615

Performance investigation of demolition wastes-based concrete composites

Building Materials
  • Year: 2021
  • Issue: 6
  • 72
  • 4231
  • Pages: 10608-10608

Nanomodified rejuvenators and protective materials for asphalt concrete

Building Materials
  • Year: 2021
  • Issue: 6
  • 47
  • 3909
  • Pages: 10607-10607

Porosity of autoclave aerated concrete and foam concrete: origin of porosity and pore size

Building Materials
  • Year: 2021
  • Issue: 6
  • 103
  • 4326
  • Pages: 10606-10606

Composite non-autoclaved aerated concrete based on an emulsion

Building Materials
  • Year: 2021
  • Issue: 6
  • 76
  • 4887
  • Pages: 10605-10605

Resistance to temperature and humidity changes of construction plywood and thermal-insulation boards

Building Materials
  • Year: 2021
  • Issue: 5
  • 75
  • 4375
  • Pages: 10506-10506

A deformed state of the composite frame with phased installation

Building Materials
  • Year: 2021
  • Issue: 5
  • 42
  • 3500
  • Pages: 10512-10512

Production of sustainable concrete using sawdust

Building Materials
  • Year: 2021
  • Issue: 5
  • 152
  • 4727
  • Pages: 10507-10507

Self-sensing cement composite for traffic monitoring in intelligent transport system

Building Materials
  • Year: 2021
  • Issue: 5
  • 60
  • 4122
  • Pages: 10505-10505

Impact resistance of steel fiber-reinforced self-compacting concrete

Building Materials
  • Year: 2021
  • Issue: 5
  • 114
  • 4682
  • Pages: 10504-10504

Effect of sawdust ash and laterite on the electrical resistivity of concrete

Building Materials
  • Year: 2021
  • Issue: 5
  • 103
  • 4615
  • Pages: 10502-10502

Elasticity modulus of cement composites predicting using layer structure model

Building Materials
  • Year: 2021
  • Issue: 4
  • 79
  • 4037
  • Pages: 10413-10413

Ultimate load capacity of high-performance fibre-concrete hollow square columns

Building Materials
  • Year: 2021
  • Issue: 4
  • 77
  • 4195
  • Pages: 10412-10412

Determination of the multicomponent lightweight mixture optimal composition

Building Materials
  • Year: 2021
  • Issue: 4
  • 40
  • 3503
  • Pages: 10411-10411

Plastic shrinkage of concrete modified by metakaolin

Building Materials
  • Year: 2021
  • Issue: 3
  • 111
  • 4636
  • Pages: 10314-10314

Homogeneous pore distribution in foam concrete by two-stage foaming

Building Materials
  • Year: 2021
  • Issue: 3
  • 80
  • 4591
  • Pages: 10313-10313

Modeling the influence of input factors on foam concrete properties

Building Materials
  • Year: 2021
  • Issue: 3
  • 114
  • 4041
  • Pages: 10311-10310

Composition and properties of cement system with glutaraldehyde

Building Materials
  • Year: 2021
  • Issue: 3
  • 61
  • 4522
  • Pages: 10307-10307

Cement and animal bone powder on rheological characteristics of bitumen

Building Materials
  • Year: 2021
  • Issue: 3
  • 101
  • 4023
  • Pages: 10304-10304

The features of the hydration and structure formation process of modified low-clinker binders

Building Materials
  • Year: 2021
  • Issue: 3
  • 94
  • 4473
  • Pages: 10302-10302

Porous inorganic materials for fire protection of industrial structures

Building Materials
  • Year: 2021
  • Issue: 3
  • 102
  • 4452
  • Pages: 10301-10301

Low-heat steaming treatment of concrete with polycarboxylate superplasticizers

Building Materials
  • Year: 2021
  • Issue: 2
  • 50
  • 3919
  • Pages: 10213-10213

Heat release and thermal conductivity of expanded-clay concrete for 3D printer

Building Materials
  • Year: 2021
  • Issue: 2
  • 99
  • 4496
  • Pages: 10210-10210

Structure and properties of mortar printed on a 3D printer

Building Materials
  • Year: 2021
  • Issue: 2
  • 150
  • 5293
  • Pages: 10206-10206

Properties of porous glass ceramics based on siliceous rocks

Building Materials
  • Year: 2021
  • Issue: 2
  • 129
  • 4544
  • Pages: 10202-10202

Silica concrete compressive behavior under alternating magnetic field

Building Materials
  • Year: 2021
  • Issue: 1
  • 102
  • 4136
  • Pages: 10112-10112

Basalt fiber reinforced expanded clay concrete for building structures

Building Materials
  • Year: 2021
  • Issue: 1
  • 165
  • 5076
  • Pages: 10107-10107

Predicting creep deformation of asphalts modified with polymer using artificial neural networks

Building Materials
  • Year: 2021
  • Issue: 1
  • 115
  • 4486
  • Pages: 10106-10106

Bond strength in PVA fibre reinforced fly ash-based geopolymer concrete

Building Materials
  • Year: 2021
  • Issue: 1
  • 169
  • 4873
  • Pages: 10105-10105

Sodium alginate emulsions for asphalt concrete modifiers encapsulating: structural rheological properties

Building Materials
  • Year: 2021
  • Issue: 1
  • 96
  • 4250
  • Pages: 10104-10104

Poly(ethylene terephthalate) composite material with modified fly ash filler

Building Materials
  • Year: 2021
  • Issue: 1
  • 91
  • 4584
  • Pages: 10103-10103

Influence of raw greywater on compressive strength of concrete

Building Materials
  • Year: 2020
  • Issue: 8
  • 86
  • 4446
  • Pages: 10010-10010

Mechanical properties of sustainable wooden structures reinforced with Basalt Fiber Reinforced Polymer

Building Materials
  • Year: 2020
  • Issue: 8
  • 88
  • 4071
  • Pages: 10012-10012

Hydration and structure formation of chloride-activated cement paste

Building Materials
  • Year: 2020
  • Issue: 8
  • 61
  • 4348
  • Pages: 10009-10009

Effect of sorption moisture content of heavy concrete on radon emanation

Building Materials
  • Year: 2020
  • Issue: 8
  • 45
  • 3993
  • Pages: 10007-10007

The formation mechanism of the porous structure of glass ceramics from siliceous rock

Building Materials
  • Year: 2020
  • Issue: 8
  • 98
  • 4533
  • Pages: 10006-10006

Distribution of corrosion products at the steel-concrete interface of XD3 concrete samples

Building Materials
  • Year: 2020
  • Issue: 8
  • 54
  • 4087
  • Pages: 10005-10005

Durability behaviors of foam concrete made of binder composites

Building Materials
  • Year: 2020
  • Issue: 8
  • 92
  • 4536
  • Pages: 10003-10003

The effect of formworks on the temperature regime in the mass concrete

Building Materials
  • Year: 2020
  • Issue: 7
  • 105
  • 3933
  • Pages: 9911-9911

Mathematical model of concrete biological corrosion

Building Materials
  • Year: 2020
  • Issue: 7
  • 93
  • 4148
  • Pages: 9906-9906

Influence of polypropylene-fiber on the mechanical properties of self-compacting-concrete with recycled aggregates

Building Materials
  • Year: 2020
  • Issue: 7
  • 102
  • 4214
  • Pages: 9905-9905

The mechanical properties of the expandable polyurethane resin based on its volumetric expansion nature

Building Materials
  • Year: 2020
  • Issue: 6
  • 102
  • 4549
  • Pages: 9811-9811

Behavior of heat treated self-compacting mortar cured in seawater

Building Materials
  • Year: 2020
  • Issue: 6
  • 66
  • 4315
  • Pages: 9809-9809

Cement slurry from electro-phosphoric slag

Building Materials
  • Year: 2020
  • Issue: 6
  • 63
  • 4286
  • Pages: 9806-9806

Effect of multicomponent modifier on the properties of cement pastes formulated from self-compacting concrete

Building Materials
  • Year: 2020
  • Issue: 6
  • 80
  • 4526
  • Pages: 9805-9805

Mechanical activation in the production of lime-sand mixtures

Building Materials
  • Year: 2020
  • Issue: 6
  • 70
  • 3826
  • Pages: 9804-9804

Mechanical-thermal characteristics of foamed ultra-lightweight composites

Building Materials
  • Year: 2020
  • Issue: 6
  • 120
  • 4769
  • Pages: 9802-9802

Clinkerless slag-silica binder: hydration process and hardening kinetics (part 2)

Building Materials
  • Year: 2020
  • Issue: 5
  • 93
  • 3753
  • Pages: 9712-9712

Fine-grained concrete with various types of fibers

Building Materials
  • Year: 2020
  • Issue: 5
  • 162
  • 4754
  • Pages: 9702-9702

Stress-strain state of fiber cement cladding within curtain wall system

Building Materials
  • Year: 2020
  • Issue: 5
  • 100
  • 4159
  • Pages: 9709-9709

The effect of simulated ambient conditions on durability of concrete

Building Materials
  • Year: 2020
  • Issue: 4
  • 93
  • 4074
  • Pages: 138-156

Water-impact abrasion of self-compacting concrete

Building Materials
  • Year: 2020
  • Issue: 4
  • 135
  • 4347
  • Pages: 60-69

Cold-bonded fly ash aggregate concrete

Building Materials
  • Year: 2020
  • Issue: 3
  • 167
  • 5399
  • Pages: 104-118

Destruction of powder-activated concrete with fixation of destruction by a laser interferometer

Building Materials
  • Year: 2020
  • Issue: 3
  • 115
  • 5110
  • Pages: 42-48

Evaluation of the basalt fiber reinforced pumice lightweight concrete

Building Materials
  • Year: 2020
  • Issue: 2
  • 189
  • 4668
  • Pages: 81-92

Micromechanical characteristics of high-performance concrete subjected to modifications of composition and homogenization

Building Materials
  • Year: 2020
  • Issue: 2
  • 127
  • 4278
  • Pages: 145-157

The strength of short compressed concrete elements in a fiberglass shell

Building Materials
  • Year: 2020
  • Issue: 2
  • 273
  • 5316
  • Pages: 3-10

The influence of polyfunctional modifier additives on properties of cement-ash fine-grained concrete

Building Materials
  • Year: 2020
  • Issue: 1
  • 157
  • 4720
  • Pages: 121-133

Lightweight cement mortar with inorganic perlite microspheres for equipping oil and gas production wells

Building Materials
  • Year: 2020
  • Issue: 1
  • 138
  • 5847
  • Pages: 83-96

Influence of silica fume on the pervious concrete with different levels of recycled aggregates

Building Materials
  • Year: 2020
  • Issue: 1
  • 241
  • 6115
  • Pages: 71-82

Increased plasticity of nano concrete with steel fibers

Building Materials
  • Year: 2020
  • Issue: 1
  • 191
  • 5016
  • Pages: 27-34

Lightweight geopolymers made of mineral wool production waste

Building Materials
  • Year: 2020
  • Issue: 1
  • 268
  • 5864
  • Pages: 3-12

Mechanical and electrical properties of concrete modified by carbon nanoparticles

Building Materials
  • Year: 2019
  • Issue: 8
  • 188
  • 6398
  • Pages: 163-172

CO2 curing of hydrated lime modified pervious concretes

Building Materials
  • Year: 2019
  • Issue: 8
  • 91
  • 4573
  • Pages: 106-114

Сlinkerless slag-silica binder: hydration process and hardening kinetics

Building Materials
  • Year: 2019
  • Issue: 8
  • 113
  • 4880
  • Pages: 96-105

Strength and microstructure of alkali-activated natural pozzolan and limestone powder mortar

Building Materials
  • Year: 2019
  • Issue: 8
  • 157
  • 5028
  • Pages: 36-47

Reducing alkaline corrosion of basalt fiber in concrete

Building Materials
  • Year: 2019
  • Issue: 7
  • 98
  • 4283
  • Pages: 112-120

Effects of polymer modified nanoclay on the performance of asphalt mixture

Building Materials
  • Year: 2019
  • Issue: 7
  • 79
  • 4664
  • Pages: 98-111

The fine high-calcium fly ash as the basis of composite cementing material

Building Materials
  • Year: 2019
  • Issue: 7
  • 150
  • 5477
  • Pages: 60-72

Heat transfer and thermal shock of recycled glass concrete

Building Materials
  • Year: 2019
  • Issue: 7
  • 106
  • 4830
  • Pages: 27-38

Synergistic-effect of iron-filing and silica-fume on the absorption and shrinkage of cement paste

Building Materials
  • Year: 2019
  • Issue: 7
  • 96
  • 4806
  • Pages: 16-26

Resistance of cement stone in sanitation solutions

Building Materials
  • Year: 2019
  • Issue: 6
  • 108
  • 4817
  • Pages: 72-84

Behavior of two-way slabs subjected to drop-weight

Building Materials
  • Year: 2019
  • Issue: 6
  • 117
  • 4895
  • Pages: 62-71

Light heat-resistant polymer concretes based on oligooxyhydridesilmethylensiloxysilane and hollow spherical fillers

Building Materials
  • Year: 2019
  • Issue: 6
  • 86
  • 4813
  • Pages: 37-46

Microstructure and strength of iron-filing Portland cement paste and mortar

Building Materials
  • Year: 2019
  • Issue: 6
  • 141
  • 4643
  • Pages: 28-36

Method of proportioning the cement-water ratio of steam-cured concrete

Building Materials
  • Year: 2019
  • Issue: 6
  • 152
  • 4921
  • Pages: 15-27

Structure, composition and properties of geopolymers from mineral wool waste

Building Materials
  • Year: 2019
  • Issue: 6
  • 289
  • 5789
  • Pages: 3-14

Physical and mechanical properties of cement stone with superabsorbent polyacrylate solutions

Building Materials
  • Year: 2019
  • Issue: 5
  • 113
  • 4499
  • Pages: 179-186

Temperature regime during the construction massive concrete with pipe cooling

Building Materials
  • Year: 2019
  • Issue: 5
  • 113
  • 5234
  • Pages: 156-166

Water permeation simulation of autoclaved aerated concrete blocks using the Lattice Boltzmann method

Building Materials
  • Year: 2019
  • Issue: 5
  • 88
  • 4605
  • Pages: 106-114

Optimization of the structure and properties of foam-glass ceramics

Building Materials
  • Year: 2019
  • Issue: 5
  • 113
  • 4686
  • Pages: 52-60

Mechanical properties of two-stage concrete modified by silica fume

Building Materials
  • Year: 2019
  • Issue: 5
  • 227
  • 5963
  • Pages: 26-38

Reducing temperature difference in mass concrete by surface insulation

Building Materials
  • Year: 2019
  • Issue: 4
  • 163
  • 5241
  • Pages: 70-79

Factors effecting the recovery process of self-repairing concrete

Building Materials
  • Year: 2019
  • Issue: 4
  • 156
  • 5050
  • Pages: 52-59

Polystyrene paint with reduced contents of volatile compounds

Building Materials
  • Year: 2019
  • Issue: 4
  • 107
  • 4881
  • Pages: 25-41

Factors affecting the ultrasonic disaggregation of powders

Building Materials
  • Year: 2019
  • Issue: 4
  • 114
  • 5025
  • Pages: 14-24

Mechanical properties of magnesium potassium phosphate cement

Building Materials
  • Year: 2019
  • Issue: 3
  • 125
  • 7928
  • Pages: 59-65

Aggregate concrete factor (λ) for burnt clay brick aggregate concrete

Building Materials
  • Year: 2019
  • Issue: 3
  • 95
  • 4762
  • Pages: 46-58

The effect of cement replacement and homogenization procedure on concrete mechanical properties

Building Materials
  • Year: 2019
  • Issue: 2
  • 85
  • 4422
  • Pages: 46-60

The geometric shape effect of steel slit dampers in their behavior

Building Materials
  • Year: 2019
  • Issue: 3
  • 102
  • 4741
  • Pages: 3-17

Nanotechnologies in producing of concrete and solutions. Facts and comments

Building Materials
  • Year: 2009
  • Issue: 4
  • 25
  • 3619
  • Pages: 39-40

Magnetic activation of water in the construction materials industry. Use of activated water in the production of gypsum partition plates

Building Materials
  • Year: 2009
  • Issue: 4
  • 31
  • 3849
  • Pages: 32-38

Bazalt fibrous concrete. Historical background

Building Materials
  • Year: 2009
  • Issue: 4
  • 28
  • 3893
  • Pages: 26-31

Application of extra-strong textile materials in construction

Building Materials
  • Year: 2009
  • Issue: 4
  • 139
  • 4941
  • Pages: 21-25

Hydrolyzed aluminosilicates of mudstones. Application for building waterproofing

Building Materials
  • Year: 2009
  • Issue: 5
  • 13
  • 3802
  • Pages: 52-54

The high-quality concretes. The analysis of possibilities and the practical use of nanotechnological methods

Building Materials
  • Year: 2009
  • Issue: 6
  • 48
  • 3773
  • Pages: 25-33

Shrinkage deformations of the concrete modified by chemical and fine mineral additives

Building Materials
  • Year: 2009
  • Issue: 7
  • 14
  • 3920
  • Pages: 11-21

Favorable composition of concrete for the waterproof structures manufacture of on the system "Rascor"

Building Materials
  • Year: 2009
  • Issue: 3
  • 10
  • 3435
  • Pages: 11-16

The application of fibre at the manufacturing of piles

Building Materials
  • Year: 2009
  • Issue: 8
  • 21
  • 3705
  • Pages: 6-8

The formation of microstructure of the compounded cement materials

Building Materials
  • Year: 2009
  • Issue: 8
  • 15
  • 3649
  • Pages: 13-16

Glasse magnesite as a new facing material

Building Materials
  • Year: 2010
  • Issue: 1
  • 9
  • 3799
  • Pages: 32-37

Heat-insulating materials in civil engineering. Stone cotton or fiber glass: the comparative analysis

Building Materials
  • Year: 2010
  • Issue: 1
  • 15
  • 3937
  • Pages: 26-31

Nanomodified magnesian schungite protective concrete

Building Materials
  • Year: 2010
  • Issue: 2
  • 5
  • 3892
  • Pages: 49-55

Soundproofing panel with a maximum soundproofing ability

Building Materials
  • Year: 2010
  • Issue: 2
  • 10
  • 3554
  • Pages: 56-58

Effective integral powder waterproofer "PRIM-1" for composite materials on basis of mazut and burnt lime reaction products

Building Materials
  • Year: 2010
  • Issue: 3
  • 12
  • 3903
  • Pages: 48-51

Installation for the thermoplastic preparation

Building Materials
  • Year: 2009
  • Issue: 2
  • 4
  • 3477
  • Pages: 59-60

Nanobeton use in monolithic large-span ribbed floors with post-stress

Building Materials
  • Year: 2009
  • Issue: 2
  • 16
  • 4087
  • Pages: 54-58

Application of numerical modeling at technology designing of heating and solidification of concrete in monolithic structures

Building Materials
  • Year: 2011
  • Issue: 2
  • 23
  • 3598
  • Pages: 24-28

Research of characteristics of nanomodified dry building mixes

Building Materials
  • Year: 2011
  • Issue: 2
  • 15
  • 3952
  • Pages: 29-32

Moisture conditions of modern structures made of autoclaved aerated concrete in operation period

Building Materials
  • Year: 2011
  • Issue: 2
  • 7
  • 3870
  • Pages: 33-38

About the quality and longevity of facing of laminose stone walls

Building Materials
  • Year: 2011
  • Issue: 2
  • 17
  • 4031
  • Pages: 42-47

Use of ashes and ash-and-slad wastes in construction

Building Materials
  • Year: 2011
  • Issue: 4
  • 105
  • 6135
  • Pages: 16-21

A silicate brick in external walls constructions of apartment houses: condition analysis, durability forecast and methods of its increasing

Building Materials
  • Year: 2011
  • Issue: 8
  • 31
  • 4246
  • Pages: 35-40

The use of Norilsk region’s sulfur and hes ash for hydraulic engineering and reconstruction

Building Materials
  • Year: 2011
  • Issue: 8
  • 7
  • 4074
  • Pages: 29-34

Composition and properties of foam glass crystal materials from compound of broken glass and high calcium slag

Building Materials
  • Year: 2011
  • Issue: 8
  • 22
  • 3917
  • Pages: 25-28

Activation efficiency of gauged water by carbon nanoparticles

Building Materials
  • Year: 2009
  • Issue: 1
  • 6
  • 3495
  • Pages: 40-45

Determining the rational technological parameters of heatresistant concrete produced with sodium silicate binder

Building Materials
  • Year: 2012
  • Issue: 3
  • 14
  • 4180
  • Pages: 63-68

Fiber concrete containing composite binders and technogenic sands of Kursk magnetic anomaly for flexural structures

Building Materials
  • Year: 2012
  • Issue: 3
  • 12
  • 4256
  • Pages: 41-47

Composition and properties of ceramic heat insulating building materials made ofthe masses of low temperature foaming on the basis of clay raw material

Building Materials
  • Year: 2012
  • Issue: 3
  • 13
  • 4135
  • Pages: 35-40

Tangential adhesion strength of cement mortars in masonry

Building Materials
  • Year: 2012
  • Issue: 3
  • 24
  • 4533
  • Pages: 19-28

Study of concrete strength heterogeneity in monolithic structures

Building Materials
  • Year: 2012
  • Issue: 3
  • 23
  • 4304
  • Pages: 12-18

Application of the film-forming material for increasing concrete articles firmness in cold continental climate

Building Materials
  • Year: 2012
  • Issue: 8
  • 8
  • 3608
  • Pages: 79-84

The effectiveness of setting and hardening accelerators for sprayed concrete

Building Materials
  • Year: 2012
  • Issue: 8
  • 14
  • 4164
  • Pages: 72-78

Concrete hardening accelerator containing galvanic sludge

Building Materials
  • Year: 2012
  • Issue: 8
  • 11
  • 3925
  • Pages: 67-71

High-strength fiber concrete for industrial and civil construction

Building Materials
  • Year: 2012
  • Issue: 8
  • 30
  • 3894
  • Pages: 61-66

Particularities of chemical modifiers selection for fabricating concrete articles by extrusion technology

Building Materials
  • Year: 2012
  • Issue: 8
  • 12
  • 3854
  • Pages: 54-60

Next generation concrete on the basis of fine-grained dry powder mixes

Building Materials
  • Year: 2012
  • Issue: 8
  • 263
  • 5237
  • Pages: 47-53

Investigation of carboxylate plasticizer modification potential in modified fine-grained concrete mixes

Building Materials
  • Year: 2012
  • Issue: 8
  • 24
  • 4356
  • Pages: 42-46

Dry mixes containing local materials of Penza region

Building Materials
  • Year: 2012
  • Issue: 8
  • 7
  • 4012
  • Pages: 37-41

Theoretical preconditions for optimization of composition and technological parameters of the plaster for walls made of aerated concrete blocks

Building Materials
  • Year: 2012
  • Issue: 8
  • 12
  • 3921
  • Pages: 30-36

Physical and mechanical properties of composite materials of different compositions based on waste products

Building Materials
  • Year: 2012
  • Issue: 9
  • 32
  • 4494
  • Pages: 14-22

Express-method for scour control

Building Materials
  • Year: 2008
  • Issue: 2
  • 5
  • 3786
  • Pages: 39-44

A new high performance neutron-absorbing materials based on the mineral binder and polymer components

Building Materials
  • Year: 2012
  • Issue: 9
  • 9
  • 4170
  • Pages: 9-13

Application of calorimetry for prognosticating strength increase of fast-curing cement systems

Building Materials
  • Year: 2013
  • Issue: 3
  • 29
  • 4099
  • Pages: 36-42

Temperature reduction during brucite-based magnesia cement production

Building Materials
  • Year: 2013
  • Issue: 3
  • 13
  • 4284
  • Pages: 29-35

Characteristics of the magnetic control of separable ferrous impurities contained in raw construction materials

Building Materials
  • Year: 2013
  • Issue: 3
  • 9
  • 4204
  • Pages: 24-28

Multiparameter structure optimization of the cellular silicate concrete

Building Materials
  • Year: 2013
  • Issue: 3
  • 6
  • 4002
  • Pages: 15-23

Self-compacting concrete with limestone powder for transport infrastructure

Building Materials
  • Year: 2016
  • Issue: 8
  • 88
  • 5155
  • Pages: 76-85

Hybrid wood-polymer composites in civil engineering

Building Materials
  • Year: 2016
  • Issue: 8
  • 72
  • 5011
  • Pages: 45-57

Use of wastes of rubble crushing in self-compacting concrete

Building Materials
  • Year: 2013
  • Issue: 7
  • 20
  • 4302
  • Pages: 26-31

Properties of silica fume procured from natural diatomite and its usage in the production of vacuum insulation panels

Building Materials
  • Year: 2013
  • Issue: 7
  • 29
  • 4181
  • Pages: 15-25

Application of stones of high voidage in the facing layer of the multilayer walls

Building Materials
  • Year: 2013
  • Issue: 8
  • 139
  • 6144
  • Pages: 14-23

Bitumen-rubber mixture for effective vibration damping sheet

Building Materials
  • Year: 2013
  • Issue: 8
  • 20
  • 4385
  • Pages: 7-13

Investigation of fresh and hardened properties of Calcium sulfoaluminate (CSA) cement blends

Building Materials
  • Year: 2014
  • Issue: 3
  • 52
  • 5203
  • Pages: 63-70

Experimental research and finite element analysis of elastic and strength properties of fiberglass composite material

Building Materials
  • Year: 2014
  • Issue: 3
  • 95
  • 4858
  • Pages: 25-39

Organo-mineral additives based on oil and gas complex waste to building materials

Building Materials
  • Year: 2016
  • Issue: 7
  • 18
  • 4521
  • Pages: 13-21

Estimating consumer product characteristics of highly filled polymer-mineral composite material based on polyvinyl chloride and waste TPP

Building Materials
  • Year: 2014
  • Issue: 3
  • 15
  • 4320
  • Pages: 17-24

Compatibility of portland cement and polycarboxylate-based superplasticizers in high-strength concrete for precast constructions

Building Materials
  • Year: 2016
  • Issue: 6
  • 53
  • 5032
  • Pages: 12-22

Structure-forming processes of cement composites, modified by sucrose additions

Building Materials
  • Year: 2016
  • Issue: 6
  • 25
  • 4241
  • Pages: 3-11

Heat-resistant ferrochrome slag based concrete

Building Materials
  • Year: 2014
  • Issue: 7
  • 54
  • 5049
  • Pages: 38-45

About some features of nanotechnology in plasticization

Building Materials
  • Year: 2008
  • Issue: 1
  • 10
  • 3570
  • Pages: 30-32

Structural sawn timber: resource enhancement

Building Materials
  • Year: 2016
  • Issue: 5
  • 20
  • 4275
  • Pages: 67-76

Compressive strength of concrete with millet husk ash (MHA) as a partial replacement for cement

Building Materials
  • Year: 2015
  • Issue: 7
  • 61
  • 4477
  • Pages: 74-79

The influence of clay additives in Portland cement on the compressive strength of the cement stone

Building Materials
  • Year: 2015
  • Issue: 7
  • 70
  • 4733
  • Pages: 66-73

Stabilizing parquet blocks with epoxy resin

Building Materials
  • Year: 2015
  • Issue: 7
  • 19
  • 4202
  • Pages: 57-65

Structure and properties of textile reinforced concrete

Building Materials
  • Year: 2015
  • Issue: 7
  • 112
  • 4837
  • Pages: 50-56

Effects of structure type on viscoelastic properties of geosynthetics

Building Materials
  • Year: 2015
  • Issue: 4
  • 30
  • 4627
  • Pages: 11-18

Modification of the cast concrete mixture by air-entraining agents

Building Materials
  • Year: 2015
  • Issue: 4
  • 49
  • 4989
  • Pages: 3-10

Modified water-cement ratio rule for the design of air-entrained concrete

Building Materials
  • Year: 2019
  • Issue: 1
  • 59
  • 4750
  • Pages: 123-135

Effect of mechanochemical activation of binder on properties of fine-grained concrete

Building Materials
  • Year: 2015
  • Issue: 2
  • 53
  • 4703
  • Pages: 63-69

Early structure formation of foam concrete mix containing modifying admixture

Building Materials
  • Year: 2015
  • Issue: 2
  • 32
  • 4464
  • Pages: 56-62

The strength of the polymer composite (fiberglass) with interlaminar shear

Building Materials
  • Year: 2016
  • Issue: 2
  • 57
  • 4444
  • Pages: 42-50

Combined Effect of Glass Fiber and Polypropylene Fiber on Mechanical Properties of Self-Compacting Concrete

Building Materials
  • Year: 2016
  • Issue: 2
  • 50
  • 4382
  • Pages: 26-31

Experimental-statistical models of properties of modified fiberreinforced fine-grained concretes

Building Materials
  • Year: 2016
  • Issue: 2
  • 41
  • 4415
  • Pages: 13-25

Modeling of porous material fracture

Building Materials
  • Year: 2017
  • Issue: 1
  • 43
  • 5559
  • Pages: 3-22

Disaggregation of ultrafine powders in conditions of ultrasonic cavitation

Building Materials
  • Year: 2017
  • Issue: 3
  • 32
  • 4516
  • Pages: 21-29

Recycling of spent battery electrolytes for construction material production

Building Materials
  • Year: 2017
  • Issue: 3
  • 38
  • 4096
  • Pages: 3-9

Fiber fine-grained concretes with polyfunctional modifying additives

Building Materials
  • Year: 2017
  • Issue: 4
  • 43
  • 5211
  • Pages: 73-83

Mechanical properties of nanocarbon modified cement

Building Materials
  • Year: 2017
  • Issue: 4
  • 51
  • 4480
  • Pages: 54-61

Effect of the supplement based on calcium hydrosilicates on the resistance of lime coatings

Building Materials
  • Year: 2017
  • Issue: 4
  • 19
  • 4173
  • Pages: 20-27

The impact of superplasticizers on the radiation changes in Portland cement stone and concretes

Building Materials
  • Year: 2017
  • Issue: 5
  • 31
  • 4262
  • Pages: 70-87

Process of hydration and structure formation of the modified self-compacting concrete

Building Materials
  • Year: 2017
  • Issue: 5
  • 51
  • 4483
  • Pages: 14-24

Influence of superplasticizers on the concrete mix properties

Building Materials
  • Year: 2017
  • Issue: 6
  • 77
  • 5200
  • Pages: 140-146

Mechanical properties of the Crimean limestone, treated with material based on silicic acids

Building Materials
  • Year: 2019
  • Issue: 1
  • 74
  • 5422
  • Pages: 59-70

Vibroisolating properties of polyurethane elastomeric materials, used in construction

Building Materials
  • Year: 2017
  • Issue: 6
  • 62
  • 4580
  • Pages: 53-60

Mechanical characteristics of polyethylene

Building Materials
  • Year: 2017
  • Issue: 6
  • 47
  • 4257
  • Pages: 17-32

Strength and deformation characteristics of ash and slag mixture

Building Materials
  • Year: 2017
  • Issue: 6
  • 53
  • 4605
  • Pages: 3-16

Composite binders for concretes with improved shock resistance

Building Materials
  • Year: 2019
  • Issue: 1
  • 102
  • 5135
  • Pages: 28-38

Expanding cements hardening within the limited deformations conditions

Building Materials
  • Year: 2017
  • Issue: 7
  • 46
  • 4215
  • Pages: 161-170

The phase composition and properties of aluminate cements after early loading

Building Materials
  • Year: 2017
  • Issue: 7
  • 27
  • 4192
  • Pages: 114-122

Water resistance of polymer compounds

Building Materials
  • Year: 2017
  • Issue: 7
  • 62
  • 4845
  • Pages: 106-113

The effect of particulate reinforcement on strength and deformation characteristics of fine-grained concrete

Building Materials
  • Year: 2017
  • Issue: 7
  • 85
  • 4942
  • Pages: 66-75

Creep behavior of geosynthetics by temperature accelerated testing

Building Materials
  • Year: 2017
  • Issue: 8
  • 37
  • 4094
  • Pages: 255-265

Burnt rock of the coal deposits in the concrete products manufacturing

Building Materials
  • Year: 2017
  • Issue: 8
  • 35
  • 4833
  • Pages: 169-180

Lightweight concrete based on siliceous compositions of natural origin

Building Materials
  • Year: 2018
  • Issue: 1
  • 34
  • 4455
  • Pages: 121-129

Silica fumes of different types for high-performance fine-grained concrete

Building Materials
  • Year: 2018
  • Issue: 2
  • 94
  • 4952
  • Pages: 151-160

Method of forecasting the effectiveness of cationic bitumen emulsions

Building Materials
  • Year: 2018
  • Issue: 2
  • 39
  • 4245
  • Pages: 91-100

Self-compacting concrete using pretreatmented rice husk ash

Building Materials
  • Year: 2018
  • Issue: 3
  • 127
  • 7192
  • Pages: 66-76

Characteristics of the droplet motion of a liquid antifreeze reagent

Building Materials
  • Year: 2018
  • Issue: 3
  • 25
  • 4058
  • Pages: 14-26

Models of direct anchoring of reinforcement in concrete

Building Materials
  • Year: 2018
  • Issue: 3
  • 44
  • 4436
  • Pages: 3-13

Mechanical properties of synthetic fibers applied to concrete reinforcement

Building Materials
  • Year: 2018
  • Issue: 4
  • 47
  • 4535
  • Pages: 15-23

The improving of the concrete quality in a monolithic clip

Building Materials
  • Year: 2018
  • Issue: 4
  • 31
  • 4157
  • Pages: 3-14

Water vapour by diffusion and mineral wool thermal insulation materials

Building Materials
  • Year: 2018
  • Issue: 5
  • 52
  • 4677
  • Pages: 183-192

Structurization processes of cement composites modified with electrolytic additives

Building Materials
  • Year: 2018
  • Issue: 5
  • 25
  • 4080
  • Pages: 125-134

Protection of construction materials based on acrylates from biodeterioration

Building Materials
  • Year: 2018
  • Issue: 5
  • 32
  • 4420
  • Pages: 116-124

Long-range technologies of site autoclaved aerated concrete use for lagging

Building Materials
  • Year: 2008
  • Issue: 1
  • 18
  • 3494
  • Pages: 38-41

Energy intensity of parts made from polyurethane elastomers

Building Materials
  • Year: 2018
  • Issue: 5
  • 20
  • 4090
  • Pages: 102-115

Composition and rheological characteristics of bitumen in short-term and long-term aging

Building Materials
  • Year: 2018
  • Issue: 5
  • 69
  • 4481
  • Pages: 93-101

Alkali-activated slag binders from rock-wool production wastes

Building Materials
  • Year: 2018
  • Issue: 6
  • 87
  • 4585
  • Pages: 219-227

Composite binders for concrete of protective structures

Building Materials
  • Year: 2018
  • Issue: 6
  • 59
  • 4952
  • Pages: 208-218

Efficiency of activation of mineral binders in vortex-layer devices

Building Materials
  • Year: 2018
  • Issue: 6
  • 44
  • 4362
  • Pages: 191-198

Interaction process on the phases interface “bitumen – dispersed phase from cement stone”

Building Materials
  • Year: 2018
  • Issue: 6
  • 28
  • 5291
  • Pages: 60-67

Adhesive dry mix using an amorphous aluminosilicates

Building Materials
  • Year: 2018
  • Issue: 6
  • 25
  • 4202
  • Pages: 23-29

Mathematical modeling of the colmatation of concrete pores during corrosion

Building Materials
  • Year: 2018
  • Issue: 7
  • 77
  • 4775
  • Pages: 198-207

Method of calculating the optimal sand content in normal-weight concrete

Building Materials
  • Year: 2018
  • Issue: 7
  • 31
  • 3678
  • Pages: 186-197

Thermal-insulation boards from fibrous plant wastes and urea-formaldehyde binder

Building Materials
  • Year: 2018
  • Issue: 7
  • 37
  • 4574
  • Pages: 136-147

Parameter of thermal resistance of bamboo multilayer wall

Building Materials
  • Year: 2018
  • Issue: 7
  • 92
  • 5610
  • Pages: 92-101

Filled epoxy composites based on polyfraction microcalcite

Building Materials
  • Year: 2018
  • Issue: 7
  • 28
  • 4421
  • Pages: 83-89

Strength and phase composition of autoclaved material: an approximation

Building Materials
  • Year: 2018
  • Issue: 7
  • 31
  • 4083
  • Pages: 63-72

Structure and mineral composition of soil-cement with complex additive

Building Materials
  • Year: 2018
  • Issue: 7
  • 29
  • 4574
  • Pages: 38-48

Laminar polymer composites for wooden structures

Building Materials
  • Year: 2018
  • Issue: 7
  • 51
  • 4944
  • Pages: 3-11

Properties and thermal insulation performance of light-weight concrete

Building Materials
  • Year: 2018
  • Issue: 8
  • 115
  • 4985
  • Pages: 173-191

Compatibility of precast heavy and monolithic lightweight concretes deforming

Building Materials
  • Year: 2018
  • Issue: 8
  • 35
  • 4245
  • Pages: 162-172

Concrete with recycled polyethylene terephthalate fiber

Building Materials
  • Year: 2018
  • Issue: 8
  • 239
  • 5912
  • Pages: 109-118

Rheological behavior of 3D printable cement paste: criterial evaluation

Building Materials
  • Year: 2018
  • Issue: 8
  • 116
  • 4544
  • Pages: 97-101

Cement based foam concrete with aluminosilicate microspheres for monolithic construction

Building Materials
  • Year: 2018
  • Issue: 8
  • 68
  • 4699
  • Pages: 86-96

Biostable silicic rock-based glass ceramic foams

Building Materials
  • Year: 2018
  • Issue: 8
  • 79
  • 4228
  • Pages: 48-56

Fiber concrete for the construction industry

Building Materials
  • Year: 2018
  • Issue: 8
  • 138
  • 5466
  • Pages: 41-47