Publication schedule
  • №2 April 2024
  • №3 May 2024

Articles by keywords "struct"

Enhancing lightweight concrete strength through modified zeolite-alkaline porous aggregate: composition optimization and structural application

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 1
  • 41
  • 635
  • Pages: 12507-12507

Bearing capacity of steel-reinforced concrete floor elements before the operation period

Building Materials
  • Year: 2024
  • Volume: 17
  • Issue: 1
  • 94
  • 449
  • Pages: 12501-12501

Stabilization of expansive soil with lime and brick dust

Grounds and foundations, underground structures
  • Year: 2023
  • Issue: 8
  • 54
  • 436
  • Pages: 12401-12401

Environmental analysis of residential exterior wall construction in temperate climate

Building constructions, buildings and structures
  • Year: 2023
  • Issue: 8
  • 37
  • 388
  • Pages: 12410-12410

Concrete heat liberation in thermal stressed state analysis

Building Materials
  • Year: 2023
  • Issue: 8
  • 44
  • 373
  • Pages: 12409-12409

Optimum space frames with rectangular plans

Structural mechanics
  • Year: 2023
  • Issue: 8
  • 20
  • 347
  • Pages: 12408-12408

Temperature mode of a room at integrated regulation of split systems

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2023
  • Issue: 7
  • 53
  • 442
  • Pages: 12310-12310

Self-healing concrete utilizing low calcium fly ash, recycled aggregate, and macro synthetic fibers: autogenous behavior and properties

Building Materials
  • Year: 2023
  • Issue: 7
  • 91
  • 598
  • Pages: 12302-12302

Fiber optics based system of monitoring load-bearing building structures

Structural mechanics
  • Year: 2023
  • Issue: 7
  • 108
  • 846
  • Pages: 12301-12301

Performance of aluminium shaving waste and silica fume blended mortar

Building Materials
  • Year: 2023
  • Issue: 6
  • 32
  • 429
  • Pages: 12209-12209

Mechanical and microstructural properties of self-healing concrete based on Hay Bacillus

Building Materials
  • Year: 2023
  • Issue: 6
  • 41
  • 567
  • Pages: 12204-12204

Alkali-activated bentonite clay-limestone cements

Building Materials
  • Year: 2023
  • Issue: 6
  • 30
  • 470
  • Pages: 12206-12206

Structural behavior of concrete arches reinforced with glass textiles

Building Materials
  • Year: 2023
  • Issue: 6
  • 58
  • 635
  • Pages: 12202-12202

Processes of foaming and formation of the structure of porous glass ceramics from siliceous rocks

Building Materials
  • Year: 2023
  • Issue: 5
  • 45
  • 605
  • Pages: 12109-12109

Shrinkage of ultra-high performance concrete with superabsorbent polymers

Building Materials
  • Year: 2023
  • Issue: 5
  • 44
  • 567
  • Pages: 12108-12108

Structural and phase features of ceramics from loam and incinerated sewage sludge ash

Building Materials
  • Year: 2023
  • Issue: 5
  • 35
  • 567
  • Pages: 12110-12110

Calculation method for sound insulation of lightweight enclosures at low frequencies

Building constructions, buildings and structures
  • Year: 2023
  • Issue: 5
  • 61
  • 591
  • Pages: 12103-12103

Soil-structure interaction: theoretical research, in-situ observations, and practical applications

Grounds and foundations, underground structures
  • Year: 2023
  • Issue: 4
  • 46
  • 577
  • Pages: 12005-12005

Phase structure of cement pastes with antifreeze agents

Building Materials
  • Year: 2023
  • Issue: 4
  • 34
  • 660
  • Pages: 12007-12007

Stress-strain state of elastic shell based on mixed finite element

Structural mechanics
  • Year: 2023
  • Issue: 4
  • 61
  • 685
  • Pages: 12003-12003

Strength and crack-resistance of concrete with fibre fillers and modifying nano-additives

Building Materials
  • Year: 2023
  • Issue: 3
  • 45
  • 766
  • Pages: 11909-11909

Tank shell stability: refined design schemes

Structural mechanics
  • Year: 2023
  • Issue: 3
  • 56
  • 868
  • Pages: 11906-11906

Numerical buckling calculation method for composite rods with semi-rigid ties

Structural mechanics
  • Year: 2023
  • Issue: 3
  • 48
  • 946
  • Pages: 11904-11904

Method for determining the thermal fluctuation constants of the generalized Zhurkov equation

Structural mechanics
  • Year: 2023
  • Issue: 2
  • 33
  • 900
  • Pages: 11804-11804

Regularity of natural oscillations characteristics change of tall earth dams

Hydraulic engineering
  • Year: 2023
  • Issue: 2
  • 58
  • 846
  • Pages: 11807-11807

Modelling of thin-walled members with restrained torsion considering the section properties

Structural mechanics
  • Year: 2023
  • Issue: 2
  • 57
  • 987
  • Pages: 11806-11806

Performance of waste foundry sand concrete in sulfate environment

Building Materials
  • Year: 2023
  • Issue: 2
  • 63
  • 920
  • Pages: 11801-11801

Diagnostics and reconstruction of bearing units

Building Materials
  • Year: 2023
  • Issue: 1
  • 38
  • 836
  • Pages: 11705-11705

Peculiarities of hydration and frost resistance of cement with natural zeolite additive

Building Materials
  • Year: 2023
  • Issue: 1
  • 45
  • 1016
  • Pages: 11711-11711

Energy efficiency of underground structures in harsh climatic conditions

Energy efficiency and thermal protection of buildings
  • Year: 2023
  • Issue: 1
  • 60
  • 880
  • Pages: 11710-11710

An improved lateral restrained local fuse used in concentric braces

Building constructions, buildings and structures
  • Year: 2022
  • Issue: 8
  • 39
  • 830
  • Pages: 11609-11609

Thermal mode of a room with integrated regulation of microclimate systems

Energy efficiency and thermal protection of buildings
  • Year: 2022
  • Issue: 8
  • 61
  • 753
  • Pages: 11610-11610

Temperature effects on the design parameters of a geothermal pile

Grounds and foundations, underground structures
  • Year: 2022
  • Issue: 8
  • 90
  • 1090
  • Pages: 11606-11606

Porous glass ceramics from siliceous rocks with high operating temperature

Building Materials
  • Year: 2022
  • Issue: 8
  • 64
  • 860
  • Pages: 11615-11615

Structure and properties of cement systems with additives of calcined clay and carbonate rocks

Building Materials
  • Year: 2022
  • Issue: 8
  • 92
  • 1042
  • Pages: 11602-11602

Seismic damage mechanism of weak beam-column joint frames

Building constructions, buildings and structures
  • Year: 2022
  • Issue: 8
  • 114
  • 1122
  • Pages: 11601-11601

Durable concrete in sewerage using non-grinded rice husk ash and water-permeable mould

Building Materials
  • Year: 2022
  • Issue: 7
  • 32
  • 1103
  • Pages: 11511-11511

Bond testing of salty-sand concrete reinforced with different rebars

Building Materials
  • Year: 2022
  • Issue: 6
  • 85
  • 1275
  • Pages: 11407-11407

Forced vibrations of a box element of a multi-story building under dynamic impact

Monitoring and testing of buildings and structures
  • Year: 2022
  • Issue: 6
  • 54
  • 922
  • Pages: 11406-11406

Blended binder based on Portland cement and recycled concrete powder

Building Materials
  • Year: 2022
  • Issue: 5
  • 72
  • 1333
  • Pages: 11306-11306

Magnesia cement in the MgO-CO2-H2O system

Building Materials
  • Year: 2022
  • Issue: 5
  • 32
  • 1001
  • Pages: 11311-11311

Impact of pond ash as fine aggregate on mechanical and microstructural properties of geopolymer concrete

Building Materials
  • Year: 2022
  • Issue: 5
  • 71
  • 1148
  • Pages: 11305-11305

Metamorphic rocks for manufactured sand and coarse aggregate for concrete and mortar

Building Materials
  • Year: 2022
  • Issue: 5
  • 46
  • 1318
  • Pages: 11308-11308

Rubber concrete beams under the action of transverse bending

Structural mechanics
  • Year: 2022
  • Issue: 5
  • 76
  • 1304
  • Pages: 11301-11301

Numerical modeling of basalt roll fire-protection for light steel thin-walled structures

Fire safety in construction
  • Year: 2022
  • Issue: 4
  • 61
  • 940
  • Pages: 11215-11215

Thermal resistance of fire retardant materials

Fire safety in construction
  • Year: 2022
  • Issue: 4
  • 47
  • 1156
  • Pages: 11213-11213

Telescopic water intake with stilling well

Water supply, sewerage, construction systems of water resources protection
  • Year: 2022
  • Issue: 4
  • 41
  • 1211
  • Pages: 11209-11209

Bearing capacity of riveted connections of mineral wool sandwich panels

Building Materials
  • Year: 2022
  • Issue: 4
  • 48
  • 1142
  • Pages: 11202-11202

High-strength steel effects on the behavior of special shear walls

Structural mechanics
  • Year: 2022
  • Issue: 3
  • 54
  • 1142
  • Pages: 11102-11102

Mooring system optimization for marine floating hydrotechnical structures

Hydraulic engineering
  • Year: 2022
  • Issue: 3
  • 75
  • 1270
  • Pages: 11112-11112

Structural health monitoring by merging dynamic response data

Structural mechanics
  • Year: 2022
  • Issue: 3
  • 59
  • 1248
  • Pages: 11111-11111

Production of Portland cement using fluorine gypsum – hydrofluoric acid waste

Building Materials
  • Year: 2022
  • Issue: 3
  • 51
  • 1292
  • Pages: 11113-11113

Limit states design theory based on critical energy levels criterion in force method form

Structural mechanics
  • Year: 2022
  • Issue: 3
  • 92
  • 1317
  • Pages: 11101-11101

Nanostructured high-performance concretes based on low-strength aggregates

Building Materials
  • Year: 2022
  • Issue: 2
  • 71
  • 1272
  • Pages: 11015-11015

The behaviour of thin-walled beam with restrained torsion

Structural mechanics
  • Year: 2022
  • Issue: 2
  • 76
  • 1387
  • Pages: 11009-11009

Target reliability of alternative fundamental combinations in Eurocode EN1990

Building constructions, buildings and structures
  • Year: 2022
  • Issue: 1
  • 66
  • 2110
  • Pages: 10912-10912

Algorithm for building structures optimization based on Lagrangian functions

Structural mechanics
  • Year: 2022
  • Issue: 1
  • 87
  • 1701
  • Pages: 10910-10910

Factors and mechanisms of nanomodification cement systems in the technological life cycle

Building Materials
  • Year: 2022
  • Issue: 1
  • 44
  • 1576
  • Pages: 10906-10906

Long–term behavior of composite steel plate-concrete slabs incorporating waste plastic fibers

Building Materials
  • Year: 2022
  • Issue: 1
  • 36
  • 1293
  • Pages: 10904-10904

Corrosion resistance of steel structures in marine conditions

Building constructions, buildings and structures
  • Year: 2021
  • Issue: 8
  • 176
  • 2126
  • Pages: 10815-10815

Strength of earth dams considering elastic-plastic properties of soil

Hydraulic engineering
  • Year: 2021
  • Issue: 8
  • 64
  • 1431
  • Pages: 10813-10813

Effective seismic response control of buildings with sliding bearings

Structural mechanics
  • Year: 2021
  • Issue: 8
  • 46
  • 1444
  • Pages: 10809-10809

Physical and mechanical properties of construction and demolition waste

Structural mechanics
  • Year: 2021
  • Issue: 8
  • 106
  • 1656
  • Pages: 10804-10804

Performance of structurally viable green concrete derived from natural Pozzolan and Nanosilica

Building Materials
  • Year: 2021
  • Issue: 7
  • 53
  • 1312
  • Pages: 10710-10710

Methodology for solving parametric optimization problems of steel structures

Structural mechanics
  • Year: 2021
  • Issue: 7
  • 88
  • 1600
  • Pages: 10705-10705

Structural reliability analysis using evidence theory and fuzzy probability distributions

Structural mechanics
  • Year: 2021
  • Issue: 7
  • 87
  • 2105
  • Pages: 10704-10704

Behavior of RC beams with different bond strength

Structural mechanics
  • Year: 2021
  • Issue: 7
  • 75
  • 1399
  • Pages: 10702-10702

The dependence of the gathering characteristics of nanocarbon cement on the parameters of its production process

Building Materials
  • Year: 2021
  • Issue: 6
  • 38
  • 1322
  • Pages: 10615-10615

Corrosive behavior of low-alloy structural steels

Structural mechanics
  • Year: 2021
  • Issue: 6
  • 25
  • 1910
  • Pages: 10613-10613

Analytical approach to stress-strain analysis of right and oblique helicoid structures

Structural mechanics
  • Year: 2021
  • Issue: 6
  • 52
  • 1583
  • Pages: 10609-10609

Formation of a software calculation model for restoring building structures after a fire

Structural mechanics
  • Year: 2021
  • Issue: 6
  • 58
  • 1376
  • Pages: 10603-10603

Resistance to temperature and humidity changes of construction plywood and thermal-insulation boards

Building Materials
  • Year: 2021
  • Issue: 5
  • 68
  • 1536
  • Pages: 10506-10506

Thin-walled compressed steel constructions under fire load

Building constructions, buildings and structures
  • Year: 2021
  • Issue: 5
  • 97
  • 1551
  • Pages: 10514-10514

Plastic behavior particularities of structures subjected to seismic loads

Structural mechanics
  • Year: 2021
  • Issue: 5
  • 93
  • 2274
  • Pages: 10513-10513

A deformed state of the composite frame with phased installation

Building Materials
  • Year: 2021
  • Issue: 5
  • 40
  • 1394
  • Pages: 10512-10512

Deflection of a cladding panel of fully tempered glass in curtain wall system

Building constructions, buildings and structures
  • Year: 2021
  • Issue: 4
  • 107
  • 2052
  • Pages: 10403-10403

Thermal mode of a room with integrated regulation of cooling systems

Energy efficiency and thermal protection of buildings
  • Year: 2021
  • Issue: 3
  • 75
  • 1792
  • Pages: 10312-10312

Composition and properties of cement system with glutaraldehyde

Building Materials
  • Year: 2021
  • Issue: 3
  • 50
  • 1855
  • Pages: 10307-10307

Elasto-plastic progressive collapse analysis based on the integration of the equations of motion

Structural mechanics
  • Year: 2021
  • Issue: 2
  • 133
  • 2118
  • Pages: 10214-10214

Low-heat steaming treatment of concrete with polycarboxylate superplasticizers

Building Materials
  • Year: 2021
  • Issue: 2
  • 42
  • 1712
  • Pages: 10213-10213

Analytical calculation of deflection of a planar truss with a triple lattice

Structural mechanics
  • Year: 2021
  • Issue: 2
  • 55
  • 1731
  • Pages: 10211-10211

Setting seismic input characteristics required for designing

Structural mechanics
  • Year: 2021
  • Issue: 2
  • 57
  • 1754
  • Pages: 10209-10209

Methodology for calculation and design of earthquake-resistant vibroisolated turbine foundations

Grounds and foundations, underground structures
  • Year: 2021
  • Issue: 2
  • 147
  • 2069
  • Pages: 10205-10205

Bearing capacity of eccentrically compressed bisteel columns

Structural mechanics
  • Year: 2021
  • Issue: 2
  • 98
  • 2149
  • Pages: 10201-10201

Stochastic model of the construction process implemented with application of sliding formwork

Building constructions, buildings and structures
  • Year: 2021
  • Issue: 1
  • 74
  • 1874
  • Pages: 10111-10111

Sodium alginate emulsions for asphalt concrete modifiers encapsulating: structural rheological properties

Building Materials
  • Year: 2021
  • Issue: 1
  • 85
  • 1798
  • Pages: 10104-10104

Cold-formed steel joints with partial warping restraint

Structural mechanics
  • Year: 2021
  • Issue: 1
  • 99
  • 1786
  • Pages: 10101-10101

Mechanical properties of sustainable wooden structures reinforced with Basalt Fiber Reinforced Polymer

Building Materials
  • Year: 2020
  • Issue: 8
  • 82
  • 1836
  • Pages: 10012-10012

Hydration and structure formation of chloride-activated cement paste

Building Materials
  • Year: 2020
  • Issue: 8
  • 57
  • 2089
  • Pages: 10009-10009

The formation mechanism of the porous structure of glass ceramics from siliceous rock

Building Materials
  • Year: 2020
  • Issue: 8
  • 90
  • 1913
  • Pages: 10006-10006

Frictional contact problem in building constructions analysis

Structural mechanics
  • Year: 2020
  • Issue: 8
  • 100
  • 1951
  • Pages: 10001-10001

Deformations during drying of wooden corner elements of I-beams

Structural mechanics
  • Year: 2020
  • Issue: 7
  • 45
  • 1656
  • Pages: 9913-9913

Flange connections with high-strength bolts with technological heredity of bolts

Structural mechanics
  • Year: 2020
  • Issue: 7
  • 87
  • 2089
  • Pages: 9912-9912

Behavior of B-C connections damaged by thermal shock

Structural mechanics
  • Year: 2020
  • Issue: 7
  • 34
  • 1600
  • Pages: 9910-9910

Bending torsion in Γ-shaped rigid and warping hinge joints

Structural mechanics
  • Year: 2020
  • Issue: 7
  • 81
  • 1716
  • Pages: 9909-9909

Improved gradient projection method for parametric optimisation of bar structures

Structural mechanics
  • Year: 2020
  • Issue: 6
  • 61
  • 1758
  • Pages: 9812-9812

The shear behavior of CFRP strengthened RC beams

Structural mechanics
  • Year: 2020
  • Issue: 6
  • 63
  • 1624
  • Pages: 9810-9810

Stress-strain state of Insulated Glass Unit in structural glazing systems

Structural mechanics
  • Year: 2020
  • Issue: 6
  • 70
  • 2208
  • Pages: 9808-9808

Theory of determining the frequency of natural oscillations of span structures

Structural mechanics
  • Year: 2020
  • Issue: 6
  • 69
  • 1924
  • Pages: 9803-9803

Mechanical-thermal characteristics of foamed ultra-lightweight composites

Building Materials
  • Year: 2020
  • Issue: 6
  • 111
  • 2214
  • Pages: 9802-9802

Centrifugal modeling of underground polymer pipes under temperature effect

Water supply, sewerage, construction systems of water resources protection
  • Year: 2020
  • Issue: 6
  • 107
  • 2028
  • Pages: 9801-9801

Behavior of CFRP strengthened columns damaged by thermal shock

Structural mechanics
  • Year: 2020
  • Issue: 5
  • 48
  • 1727
  • Pages: 9708-9708

Stress-strain state of the precast monolithic bent element

Structural mechanics
  • Year: 2020
  • Issue: 5
  • 40
  • 1757
  • Pages: 9706-9706

Actual thermophysical characteristics of autoclaved aerated concrete

Energy efficiency and thermal protection of buildings
  • Year: 2020
  • Issue: 4
  • 284
  • 3152
  • Pages: 129-137

Spatial natural vibrations of viscoelastic axisymmetric structures

Structural mechanics
  • Year: 2020
  • Issue: 4
  • 54
  • 1789
  • Pages: 118-128

Impact of anchored CFRP on the torsional and bending behaviour of RC beams

Structural mechanics
  • Year: 2020
  • Issue: 4
  • 61
  • 2029
  • Pages: 79-93

Monitoring of the natural frequencies of Chirkey arch dam

Hydraulic engineering
  • Year: 2020
  • Issue: 4
  • 112
  • 2054
  • Pages: 15-20

Attenuation of the soil vibration amplitude at pile driving

Grounds and foundations, underground structures
  • Year: 2020
  • Issue: 3
  • 125
  • 2493
  • Pages: 49-56

Single burning item test for timber with fire protection

Fire safety in construction
  • Year: 2020
  • Issue: 3
  • 152
  • 3190
  • Pages: 19-30

Behavior of strengthened concrete beams damaged by thermal shock

Building constructions, buildings and structures
  • Year: 2020
  • Issue: 2
  • 178
  • 2431
  • Pages: 93-107

The strength of short compressed concrete elements in a fiberglass shell

Building Materials
  • Year: 2020
  • Issue: 2
  • 263
  • 2737
  • Pages: 3-10

The influence of polyfunctional modifier additives on properties of cement-ash fine-grained concrete

Building Materials
  • Year: 2020
  • Issue: 1
  • 152
  • 2488
  • Pages: 121-133

Load-carrying capacity of timber-concrete composite panels

Structural mechanics
  • Year: 2020
  • Issue: 1
  • 167
  • 3374
  • Pages: 60-70

Long span bridges buffeting response to wind turbulence

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2020
  • Issue: 1
  • 149
  • 2587
  • Pages: 35-49

Technical diagnostics of reinforced concrete structures using intelligent systems

Building constructions, buildings and structures
  • Year: 2020
  • Issue: 1
  • 291
  • 3567
  • Pages: 13-26

Failure simulation of a RC multi-storey building frame with prestressed girders

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 8
  • 211
  • 2883
  • Pages: 155-162

Effects of model-based design and loading on responses of base-isolated structures

Structural mechanics
  • Year: 2019
  • Issue: 8
  • 86
  • 2121
  • Pages: 142-154

Stress-strain state of a glass panel with adhesive point fixings

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 8
  • 105
  • 2232
  • Pages: 127-141

Road organo-mineral mixtures based on oil sludge

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2019
  • Issue: 8
  • 118
  • 2348
  • Pages: 114-125

CFD simulation of the convective flows in the vertical caverns

Energy efficiency and thermal protection of buildings
  • Year: 2019
  • Issue: 8
  • 104
  • 2873
  • Pages: 76-83

Timber frame buildings with efficient junction designs for earthquake-prone areas

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 8
  • 158
  • 2930
  • Pages: 84-95

Bending and torsion behaviour of CFRP strengthened RC beams

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 8
  • 160
  • 2942
  • Pages: 48-62

Strength and microstructure of alkali-activated natural pozzolan and limestone powder mortar

Building Materials
  • Year: 2019
  • Issue: 8
  • 151
  • 2523
  • Pages: 36-47

Dynamic deformation of a beam at sudden structural transformation of foundation

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 7
  • 144
  • 4041
  • Pages: 129-144

An improved membrane element for high-rise building with shear walls

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 7
  • 91
  • 2186
  • Pages: 121-128

The impact of cable spacing on the behavior of cable-stayed bridges

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2019
  • Issue: 7
  • 95
  • 2099
  • Pages: 49-59

Dynamics of a physically nonlinear viscoelastic cylindrical shell with a concentrated mass

Structural mechanics
  • Year: 2019
  • Issue: 7
  • 89
  • 2544
  • Pages: 39-48

Optimization of steel beam structures for frame buildings subject to their safety requirements

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 7
  • 226
  • 3002
  • Pages: 3-15

Resistance of cement stone in sanitation solutions

Building Materials
  • Year: 2019
  • Issue: 6
  • 107
  • 2543
  • Pages: 72-84

Behavior of two-way slabs subjected to drop-weight

Building Materials
  • Year: 2019
  • Issue: 6
  • 111
  • 2281
  • Pages: 62-71

Microstructure and strength of iron-filing Portland cement paste and mortar

Building Materials
  • Year: 2019
  • Issue: 6
  • 138
  • 2448
  • Pages: 28-36

Structure, composition and properties of geopolymers from mineral wool waste

Building Materials
  • Year: 2019
  • Issue: 6
  • 271
  • 3139
  • Pages: 3-14

Physical and mechanical properties of cement stone with superabsorbent polyacrylate solutions

Building Materials
  • Year: 2019
  • Issue: 5
  • 103
  • 2433
  • Pages: 179-186

Modelling of contact interaction of structures with the base under dynamic loading

Structural mechanics
  • Year: 2019
  • Issue: 5
  • 130
  • 2512
  • Pages: 167-178

Nonlinear deformation and stability of geometrically exact elastic arches

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 5
  • 187
  • 3041
  • Pages: 39-51

Clay-cement-concrete diaphragm — justifying calculation for new-built constructions

Hydraulic engineering
  • Year: 2019
  • Issue: 5
  • 197
  • 2806
  • Pages: 16-25

Polystyrene paint with reduced contents of volatile compounds

Building Materials
  • Year: 2019
  • Issue: 4
  • 104
  • 2527
  • Pages: 25-41

Factors affecting the ultrasonic disaggregation of powders

Building Materials
  • Year: 2019
  • Issue: 4
  • 110
  • 2752
  • Pages: 14-24

Static accounting of highest modes in problems of structural dynamics

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 4
  • 305
  • 3695
  • Pages: 3-13

The compatibility of deformation of the hollow-core slab with beams

Structural mechanics
  • Year: 2019
  • Issue: 3
  • 75
  • 2457
  • Pages: 93-102

Behaviour of axisymmetric thick plates resting against conical surface

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 2
  • 98
  • 2859
  • Pages: 92-104

Cracking of tunnel bottom structure influenced by carbonaceous slate stratum

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2019
  • Issue: 2
  • 51
  • 2201
  • Pages: 83-91

Stress distribution in ash and slag mixtures

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2019
  • Issue: 2
  • 73
  • 2360
  • Pages: 72-82

Manufacturing structural building components from round timber with heartwood rot

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 2
  • 64
  • 2489
  • Pages: 11-19

Analysis of some results in determining the aerodynamic characteristics of multistorey building

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 3
  • 40
  • 2035
  • Pages: 50-52

Destruction of building materials in terms of the method of crystallization in gels

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 3
  • 9
  • 1850
  • Pages: 53-60

Business plan for an investment and construction project based on economic and mathematical models

Technology and organization of construction
  • Year: 2009
  • Issue: 3
  • 20
  • 1915
  • Pages: 61-64

Compressive stability of composite columns made of high-strength steel profiles

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 3
  • 23
  • 1894
  • Pages: 42-49

Protection of frame buildings from progressive collapse

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 3
  • 93
  • 2303
  • Pages: 38-41

Influence of high temperatures of fire on building structures

Fire safety in construction
  • Year: 2009
  • Issue: 4
  • 147
  • 2424
  • Pages: 41-43

Column joint with a beamless slab in a monolithic building

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 3
  • 39
  • 2081
  • Pages: 33-37

Complex use of monolithic foam concrete for construction in hard-to-rich areas of energy resources production

Technology and organization of construction
  • Year: 2009
  • Issue: 4
  • 15
  • 1963
  • Pages: 16-20

Underground automated parkings in the centre of city

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 4
  • 33
  • 2006
  • Pages: 11-15

Humic substances as risk factor for underground structures

Monitoring and testing of buildings and structures
  • Year: 2009
  • Issue: 5
  • 34
  • 2009
  • Pages: 10-17

Strengthening of building structures using post-stressed reinforced concrete

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 3
  • 44
  • 2250
  • Pages: 29-32

The spatial rigidity assurance of coating in light-gauge thin structure buidings

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 6
  • 41
  • 2162
  • Pages: 12-15

Calculation of concrete structures strengthening with compound materials

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 3
  • 30
  • 1979
  • Pages: 25-28

Strengthening of reinforced concrete structures using polymer compounds

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 3
  • 38
  • 2216
  • Pages: 22-24

Injection as a method of strengthening stone structures

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 3
  • 31
  • 2092
  • Pages: 17-21

Pipe protecting screen use in the construction of underground structures in Saint-Petersburg

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 7
  • 18
  • 1913
  • Pages: 6-9

Favorable composition of concrete for the waterproof structures manufacture of on the system "Rascor"

Building Materials
  • Year: 2009
  • Issue: 3
  • 8
  • 1675
  • Pages: 11-16

The estimation of level of the reliability in view of organizational and technological parameters of building of the linearly and extensive constructions

Technology and organization of construction
  • Year: 2009
  • Issue: 8
  • 13
  • 1728
  • Pages: 62-64

Method of constructive anisotropy for the orthotropic and isotropic ribbed shells

Structural mechanics
  • Year: 2009
  • Issue: 8
  • 13
  • 1909
  • Pages: 40-46

Nanomodified magnesian schungite protective concrete

Building Materials
  • Year: 2010
  • Issue: 2
  • 5
  • 1998
  • Pages: 49-55

Reconstruction of St. Petersburg roofs based on light steel thin-walled structures and de-icing system

Building constructions, buildings and structures
  • Year: 2010
  • Issue: 2
  • 30
  • 2002
  • Pages: 59-64

Strengthening of building structures using carbon composite materials

Building constructions, buildings and structures
  • Year: 2010
  • Issue: 2
  • 70
  • 2769
  • Pages: 19-22

Use features of resistive electrocontact method for control of steel structures deflected mode

Monitoring and testing of buildings and structures
  • Year: 2010
  • Issue: 3
  • 26
  • 2007
  • Pages: 32-34

Importance of diagnostic characters and diagnostic value of technical inspection for estimation of building structures elements state

Monitoring and testing of buildings and structures
  • Year: 2010
  • Issue: 3
  • 44
  • 2197
  • Pages: 27-31

The main directions of building processes reliability improving

Technology and organization of construction
  • Year: 2010
  • Issue: 4
  • 27
  • 1820
  • Pages: 59-60

Magnetic suspension in soundproofing cabins for confidential talks

Ecological safety of construction
  • Year: 2010
  • Issue: 4
  • 4
  • 1955
  • Pages: 33-77

Fixed textile shutters

Technology and organization of construction
  • Year: 2010
  • Issue: 4
  • 13
  • 1816
  • Pages: 13-16

Monolithic constructions made of light nanoconcrete by the example of 5-story multilayer parking

Building constructions, buildings and structures
  • Year: 2010
  • Issue: 5
  • 11
  • 1987
  • Pages: 12-15

Fire resistance of reinforced concrete constructions: models and methods of calculation

Fire safety in construction
  • Year: 2010
  • Issue: 6
  • 80
  • 2076
  • Pages: 58-61

Use of resistive electrocontact method for monitoring of steel constructions state

Monitoring and testing of buildings and structures
  • Year: 2010
  • Issue: 7
  • 14
  • 2035
  • Pages: 21-24

Specifity of survey of reinforced concrete structures under agressive water action

Monitoring and testing of buildings and structures
  • Year: 2010
  • Issue: 7
  • 25
  • 1955
  • Pages: 35-40

About the survey of building structures with signs of biodeterioration

Monitoring and testing of buildings and structures
  • Year: 2010
  • Issue: 7
  • 31
  • 2085
  • Pages: 41-46

Examination and reinforcement technologies for masonry structures

Monitoring and testing of buildings and structures
  • Year: 2010
  • Issue: 7
  • 53
  • 2099
  • Pages: 14-20

General problems of technical diagnosis of non-metal building structures in explotable buildings and erections

Monitoring and testing of buildings and structures
  • Year: 2010
  • Issue: 7
  • 43
  • 2187
  • Pages: 4-9

About the price formation on the survey market

Monitoring and testing of buildings and structures
  • Year: 2010
  • Issue: 7
  • 30
  • 2067
  • Pages: 53-56

Evaluation of the damping effect of the base on the vibrations of the structure (deterministic, probabilistic and possibilistic approach)

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 9
  • 18
  • 2141
  • Pages: 85-96

Installation for the thermoplastic preparation

Building Materials
  • Year: 2009
  • Issue: 2
  • 4
  • 1778
  • Pages: 59-60

Nanobeton use in monolithic large-span ribbed floors with post-stress

Building Materials
  • Year: 2009
  • Issue: 2
  • 16
  • 2247
  • Pages: 54-58

Increase in double-wall constructions acoustic isolation due to the use of soundproof bridges

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 2
  • 13
  • 1899
  • Pages: 46-53

Characteristics of the sorption module of a hydraulic structure for cleaning cemetery sewage flow

Hydraulic engineering
  • Year: 2009
  • Issue: 2
  • 10
  • 2144
  • Pages: 43-45

Causes of the unfavorable state of basements in St. Petersburg

Monitoring and testing of buildings and structures
  • Year: 2009
  • Issue: 2
  • 11
  • 1962
  • Pages: 31-42

Climate systems and the formation of pathogenic minerals in the human body

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2009
  • Issue: 2
  • 8
  • 1821
  • Pages: 23-30

Climate systems with heat pumps and water loop

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2009
  • Issue: 2
  • 12
  • 1874
  • Pages: 19-22

Calculation of monolithic residential buildings for progressive collapse in the computer complex “SCAD Office”

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 2
  • 25
  • 2088
  • Pages: 13-18

Application of numerical modeling at technology designing of heating and solidification of concrete in monolithic structures

Building Materials
  • Year: 2011
  • Issue: 2
  • 20
  • 1802
  • Pages: 24-28

Research of characteristics of nanomodified dry building mixes

Building Materials
  • Year: 2011
  • Issue: 2
  • 14
  • 2055
  • Pages: 29-32

Integrated system SCAD Office for the load-bearing structure calculation and design. New version, new features.

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 2
  • 13
  • 2034
  • Pages: 10-12

In response to professor Karpov, V.V. (About the scientific priority of the structural anisotropy method for ribbed shells as well as on functional, describing the material’s creeping)

Building constructions, buildings and structures
  • Year: 2011
  • Issue: 3
  • 17
  • 1692
  • Pages: 75-80

Node connections of cold-formed steel structures

Building constructions, buildings and structures
  • Year: 2011
  • Issue: 3
  • 30
  • 2175
  • Pages: 47-52

Mathematical modelling and calculation of hydraulic engineering constructions such as dam-plate in view of hydrodynamical pressure of water and seismic loading

Hydraulic engineering
  • Year: 2011
  • Issue: 3
  • 57
  • 2490
  • Pages: 59-70

Finite element calculation model of thin-walled cold-formed profile in software package SCAD Office

Structural mechanics
  • Year: 2011
  • Issue: 3
  • 26
  • 1971
  • Pages: 36-46

Use of ashes and ash-and-slad wastes in construction

Building Materials
  • Year: 2011
  • Issue: 4
  • 89
  • 3717
  • Pages: 16-21

On the Choice of Concrete Strength Inspection Methods of Ready-built Structures

Monitoring and testing of buildings and structures
  • Year: 2011
  • Issue: 4
  • 56
  • 2948
  • Pages: 10-15

Partially rib precast and cast-in-situ floors with cellular-concrete blocks

Structural mechanics
  • Year: 2011
  • Issue: 6
  • 126
  • 3059
  • Pages: 50-55

Installation errors in calculating large-panel buildings

Building constructions, buildings and structures
  • Year: 2011
  • Issue: 6
  • 21
  • 2474
  • Pages: 35-40

Calculation algorithm of steel-reinforced concrete water passages

Hydraulic engineering
  • Year: 2011
  • Issue: 6
  • 20
  • 2244
  • Pages: 41-49

Building side area minimization at the expense of optimization the schedule of movement of workers

Technology and organization of construction
  • Year: 2011
  • Issue: 7
  • 18
  • 1945
  • Pages: 76-81

Composite quality index of steel auxiliary bar structures

Monitoring and testing of buildings and structures
  • Year: 2011
  • Issue: 7
  • 12
  • 2013
  • Pages: 62-70

Building systems technical condition assessment based on the multilevel probabilistic analysis

Monitoring and testing of buildings and structures
  • Year: 2011
  • Issue: 7
  • 15
  • 2344
  • Pages: 45-51

Monitoring of unique buildings with using of dynamic parameters according to GOST R 53778-2010

Monitoring and testing of buildings and structures
  • Year: 2011
  • Issue: 7
  • 26
  • 2088
  • Pages: 33-39

Infared image inspection of ground hydraulic constructions slopes fastening reinforced concrete slabs

Monitoring and testing of buildings and structures
  • Year: 2011
  • Issue: 7
  • 13
  • 2261
  • Pages: 26-32

Test methods of corrosion state of reinforced concrete structures

Monitoring and testing of buildings and structures
  • Year: 2011
  • Issue: 7
  • 35
  • 2435
  • Pages: 18-25

Method of specific energy for determination mechanical characteristics of structural steel

Structural mechanics
  • Year: 2011
  • Issue: 7
  • 7
  • 2080
  • Pages: 11-17

A silicate brick in external walls constructions of apartment houses: condition analysis, durability forecast and methods of its increasing

Building Materials
  • Year: 2011
  • Issue: 8
  • 27
  • 2207
  • Pages: 35-40

Frost-protected shallow foundation: work in seasonally-freezing grounds, practice of thermal calculation

Grounds and foundations, underground structures
  • Year: 2011
  • Issue: 8
  • 32
  • 3020
  • Pages: 13-18

The estimation of enclosing structures edge zones influence on thermal performance and energy efficiency of buildings

Energy efficiency and thermal protection of buildings
  • Year: 2011
  • Issue: 8
  • 16
  • 2346
  • Pages: 5-12

On the basic principles of quality assurance of construction. International experience

Technology and organization of construction
  • Year: 2009
  • Issue: 1
  • 15
  • 1813
  • Pages: 55-56

Vibration tests on fragments of monolithic building until destruction

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 1
  • 17
  • 2257
  • Pages: 14-21

Generalized criteria for the optimal choice of technologies and machines

Technology and organization of construction
  • Year: 2009
  • Issue: 1
  • 8
  • 1735
  • Pages: 32-39

Inspection methods of reinforcement parameters of concrete structures

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 1
  • 58
  • 2617
  • Pages: 4-13

The dispersed reinforcement usage in the hydraulic structures construction

Hydraulic engineering
  • Year: 2009
  • Issue: 1
  • 18
  • 2192
  • Pages: 28-32

Testing of calculation method of the enclosing structures temperature-humidity conditions on the results of indoor climate in-situ measurements

Energy efficiency and thermal protection of buildings
  • Year: 2012
  • Issue: 2
  • 14
  • 2198
  • Pages: 18-23

Automation of the consolidated statement generation of materials in the reinforced concrete structures design

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 1
  • 11
  • 1951
  • Pages: 26-27

The model of intellectual support of decision-making in building structures condition management

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 3
  • 10
  • 2100
  • Pages: 74-82

Effect of acoustic holes on sound isolation of building structures

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 1
  • 16
  • 2010
  • Pages: 17-21

Frame systems used in enclosure structure in construction from monolithic autoclaved aerated concrete

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 1
  • 13
  • 1993
  • Pages: 13-16

The use of CAD for solving research problems in the power pole design

Building constructions, buildings and structures
  • Year: 2009
  • Issue: 1
  • 6
  • 1878
  • Pages: 6-12

Composition and properties of ceramic heat insulating building materials made ofthe masses of low temperature foaming on the basis of clay raw material

Building Materials
  • Year: 2012
  • Issue: 3
  • 13
  • 2201
  • Pages: 35-40

The economic effect of increasing the level of NPP construction project development and implementation

Technology and organization of construction
  • Year: 2008
  • Issue: 2
  • 4
  • 1648
  • Pages: 54-56

On the issue of durability and energy efficiency of modern enclosing wall structures of residential, administrative and industrial buildings

Energy efficiency and thermal protection of buildings
  • Year: 2008
  • Issue: 2
  • 60
  • 2864
  • Pages: 50-53

Control methods for strength of ceramic bricks in the inspection of buildings

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 3
  • 85
  • 3138
  • Pages: 29-34

Study of concrete strength heterogeneity in monolithic structures

Building Materials
  • Year: 2012
  • Issue: 3
  • 21
  • 2339
  • Pages: 12-18

Reliability of earth dams on compound base

Grounds and foundations, underground structures
  • Year: 2012
  • Issue: 4
  • 34
  • 2241
  • Pages: 2-9

On the vibrations localization in building structures

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 5
  • 22
  • 2176
  • Pages: 60-64

The method of corrosion crack opening evaluation for the reinforced concrete structures technical state assessment

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 5
  • 30
  • 2160
  • Pages: 6-11

Numerical evaluating strength reliability of penstocks under hydraulic hammer

Hydraulics and Engineering Hydrology
  • Year: 2012
  • Issue: 6
  • 13
  • 2175
  • Pages: 29-35

Rational construction method for linearly extended structures based on alterative options

Technology and organization of construction
  • Year: 2012
  • Issue: 7
  • 10
  • 1794
  • Pages: 89-92

Estimating reliability of buildings and structures according to the methods of the risk of unserviceability

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 7
  • 28
  • 2091
  • Pages: 76-88

Testing the technical condition of maintained building structures

Monitoring and testing of buildings and structures
  • Year: 2012
  • Issue: 7
  • 47
  • 2588
  • Pages: 70-75

The ultimate bearing capacity of ice beams

Structural mechanics
  • Year: 2013
  • Issue: 1
  • 19
  • 2337
  • Pages: 65-74

Stability assessment of concrete structures on not bedrock foundation

Grounds and foundations, underground structures
  • Year: 2013
  • Issue: 1
  • 16
  • 2012
  • Pages: 57-64

Fatigue assessment of tubular structures

Monitoring and testing of buildings and structures
  • Year: 2013
  • Issue: 1
  • 13
  • 2283
  • Pages: 39-47

External reinforcing of fiber concrete constructions by carbon fiber tapes

Building constructions, buildings and structures
  • Year: 2013
  • Issue: 1
  • 27
  • 1958
  • Pages: 21-26

The methodology of determining the corrosion of steel structures

Monitoring and testing of buildings and structures
  • Year: 2013
  • Issue: 1
  • 37
  • 2330
  • Pages: 12-20

Express-method for scour control

Building Materials
  • Year: 2008
  • Issue: 2
  • 5
  • 1885
  • Pages: 39-44

Water quality protection in the coastal artificial water areas

Hydraulic engineering
  • Year: 2013
  • Issue: 2
  • 11
  • 2121
  • Pages: 75-80

Urban development monitoring, including the use of information technology

Architecture and Urban planning
  • Year: 2012
  • Issue: 9
  • 25
  • 1697
  • Pages: 3-8

Numerical analysis of the effect of freezing ground in the laying zone pads on heat loss of channelless pipelines laid out without canals

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2013
  • Issue: 2
  • 13
  • 2111
  • Pages: 19-24

Multiparameter structure optimization of the cellular silicate concrete

Building Materials
  • Year: 2013
  • Issue: 3
  • 6
  • 2064
  • Pages: 15-23

Discharge capacity of sluiceway channel of water intake structure for diversion power plant in winter

Hydraulic engineering
  • Year: 2013
  • Issue: 4
  • 12
  • 2267
  • Pages: 60-69

The elementary mathematical model of sustainable enclosing structure

Energy efficiency and thermal protection of buildings
  • Year: 2016
  • Issue: 8
  • 39
  • 2351
  • Pages: 86-91

Increasing stability of flexible dam-foundations in engineering protection of buildings from flooding

Hydraulic engineering
  • Year: 2013
  • Issue: 4
  • 19
  • 2379
  • Pages: 51-59

Design of tower type structures to dynamic effects taking into account flexibility of the pile foundation and the base

Grounds and foundations, underground structures
  • Year: 2013
  • Issue: 4
  • 41
  • 2333
  • Pages: 46-50

Self-compacting concrete with limestone powder for transport infrastructure

Building Materials
  • Year: 2016
  • Issue: 8
  • 74
  • 2847
  • Pages: 76-85

The effect of construction joints and cracks on the stress-strain state of the arch-gravity dam

Hydraulic engineering
  • Year: 2013
  • Issue: 5
  • 14
  • 2093
  • Pages: 76-85

An assessment of stress-strain state of earth dams with account of elastic-plastic, moist properties of soil and large strains

Hydraulic engineering
  • Year: 2013
  • Issue: 5
  • 28
  • 2325
  • Pages: 59-68

The model of the space-time analogy in the optimization of the renovation order of buildings

Technology and organization of construction
  • Year: 2013
  • Issue: 7
  • 19
  • 2219
  • Pages: 51-57

The service life estimation method for the structural elements of residential buildings

Monitoring and testing of buildings and structures
  • Year: 2013
  • Issue: 7
  • 24
  • 2787
  • Pages: 40-50

Moisture sorption models for wood

Structural mechanics
  • Year: 2016
  • Issue: 8
  • 38
  • 2486
  • Pages: 26-36

Influence of circuit temperature during the construction of the voltage in load-bearing structure

Building constructions, buildings and structures
  • Year: 2008
  • Issue: 2
  • 24
  • 2037
  • Pages: 8-16

Buildings and structures survey: conference as a way of solving problems

Monitoring and testing of buildings and structures
  • Year: 2013
  • Issue: 7
  • 10
  • 2186
  • Pages: 4-6

Geothermal heat pump in the passive house concept

Energy efficiency and thermal protection of buildings
  • Year: 2016
  • Issue: 8
  • 49
  • 2687
  • Pages: 18-25

An energy efficiency evaluation of architectural and construction solutions of an initial design stage in Autodesk REVIT Architecture

Energy efficiency and thermal protection of buildings
  • Year: 2013
  • Issue: 8
  • 36
  • 2518
  • Pages: 64-73

Universal method for calculation of reliable completion times

Technology and organization of construction
  • Year: 2016
  • Issue: 7
  • 23
  • 2155
  • Pages: 70-80

Overall instability and optimization of bar structures with random defects in case of constraints on faultless operation probability

Structural mechanics
  • Year: 2013
  • Issue: 9
  • 11
  • 2294
  • Pages: 30-41

Non-uniform torsion of thin-walled open-section multi-span beams

Structural mechanics
  • Year: 2016
  • Issue: 7
  • 63
  • 2736
  • Pages: 55-69

Optimization of frame structures with possibility оf emergency actions

Structural mechanics
  • Year: 2013
  • Issue: 9
  • 30
  • 2408
  • Pages: 23-29

Dynamic Interaction between Ice and Inclined Structure

Hydraulic engineering
  • Year: 2014
  • Issue: 1
  • 35
  • 2975
  • Pages: 71-79

Predicting the Durability of Concrete Structures, including Sulfate Corrosion of Concrete

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 1
  • 40
  • 2778
  • Pages: 41-52

Exergoeconomic model of a central air conditioning system

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2016
  • Issue: 7
  • 23
  • 2236
  • Pages: 22-30

Structural Analysis of Buildings at Explosive Actions in SCAD

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 1
  • 67
  • 3063
  • Pages: 12-22

Numerical analysis of the impact of engineering constructions on heat loss of channel-free heat pipelines

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2014
  • Issue: 2
  • 11
  • 2174
  • Pages: 5-13

Chemical method of assessing the degree of biodegradation of wooden structural elements

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 3
  • 20
  • 2363
  • Pages: 77-89

Optional reference method to determine frost resistance of concrete

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 3
  • 21
  • 2295
  • Pages: 71-76

Analysis of structural-phase state of monoaluminate calcium

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 3
  • 9
  • 2154
  • Pages: 56-62

Ice induced vibrations of offshore structures

Hydraulic engineering
  • Year: 2014
  • Issue: 4
  • 36
  • 2438
  • Pages: 72-88

The load-bearing capacity of hanging piles by the strength criterion of a pile or soil material

Grounds and foundations, underground structures
  • Year: 2016
  • Issue: 7
  • 57
  • 2771
  • Pages: 3-12

Structures vibration induced by ice action

Hydraulic engineering
  • Year: 2014
  • Issue: 4
  • 17
  • 2289
  • Pages: 63-71

Field measurement of waves for defining loads on marine hydraulic structures

Hydraulic engineering
  • Year: 2014
  • Issue: 4
  • 21
  • 2547
  • Pages: 49-62

Inspection of pile foundation before constructing additional storeys оn existing buildings

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 4
  • 43
  • 2546
  • Pages: 17-27

Method of thermotechnical uniformity coefficient evaluation by analyzing thermograms

Structural mechanics
  • Year: 2016
  • Issue: 6
  • 18
  • 2328
  • Pages: 60-67

Computer modeling of tasks in dynamics of viscoelastic thinwalled elements in structures of variable thickness

Structural mechanics
  • Year: 2014
  • Issue: 5
  • 12
  • 1992
  • Pages: 83-94

Allowing for changes in the calculated scheme during the analysis of structural behaviour

Building constructions, buildings and structures
  • Year: 2014
  • Issue: 5
  • 35
  • 2279
  • Pages: 15-26

Compatibility of portland cement and polycarboxylate-based superplasticizers in high-strength concrete for precast constructions

Building Materials
  • Year: 2016
  • Issue: 6
  • 48
  • 2711
  • Pages: 12-22

An effective method of explosive compaction of hydraulic structures foundations

Hydraulic engineering
  • Year: 2014
  • Issue: 6
  • 10
  • 2449
  • Pages: 32-39

Management and reliability of construction programs

Technology and organization of construction
  • Year: 2014
  • Issue: 7
  • 28
  • 2037
  • Pages: 74-79

Experience of introduction of fine-grained concrete when producing road plates

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2014
  • Issue: 7
  • 26
  • 2487
  • Pages: 46-54

About some features of nanotechnology in plasticization

Building Materials
  • Year: 2008
  • Issue: 1
  • 9
  • 1733
  • Pages: 30-32

Average density and porosity of high-strength lightweight concrete

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 7
  • 26
  • 2441
  • Pages: 31-37

"Inspection of buildings and structures: problems and solutions" – conference resume

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 7
  • 21
  • 2172
  • Pages: 3-4

Structural sawn timber: resource enhancement

Building Materials
  • Year: 2016
  • Issue: 5
  • 16
  • 2218
  • Pages: 67-76

Economic evaluation of calendar plans for the construction of nuclear power plants

Technology and organization of construction
  • Year: 2008
  • Issue: 1
  • 4
  • 1579
  • Pages: 51-52

Problems of completion of nuclear power plant units after long-term conservation

Building constructions, buildings and structures
  • Year: 2008
  • Issue: 1
  • 20
  • 1640
  • Pages: 42-43

Improved numerical methods in reliability analysis of suspension roof joints

Structural mechanics
  • Year: 2016
  • Issue: 5
  • 21
  • 2892
  • Pages: 27-41

Increase in fire resistance of building expansion joints via intumescent sealant composition

Fire safety in construction
  • Year: 2014
  • Issue: 8
  • 30
  • 2474
  • Pages: 20-24

Radius estimation of camouflage cavity in the explosion of the heating element spherical charge in the rocks

Structural mechanics
  • Year: 2008
  • Issue: 1
  • 8
  • 1786
  • Pages: 44-50

A diagram method of describing the process of non-stationary heat transfer

Energy efficiency and thermal protection of buildings
  • Year: 2015
  • Issue: 8
  • 102
  • 3179
  • Pages: 68-82

Thermal characteristics of the external walling made of cold-formed steel studs and polystyrene concrete

Energy efficiency and thermal protection of buildings
  • Year: 2015
  • Issue: 8
  • 44
  • 2869
  • Pages: 44-55

Buildings with suspended structures in seismic areas

Building constructions, buildings and structures
  • Year: 2016
  • Issue: 5
  • 52
  • 2664
  • Pages: 17-26

Substantiation of an express-method for determining the freeze-thaw resistance of cellular materials

Monitoring and testing of buildings and structures
  • Year: 2015
  • Issue: 8
  • 12
  • 2275
  • Pages: 7-19

IX International congress “Energy efficiency. XXI century”

Energy efficiency and thermal protection of buildings
  • Year: 2015
  • Issue: 8
  • 12
  • 2254
  • Pages: 3-6

Structure and properties of textile reinforced concrete

Building Materials
  • Year: 2015
  • Issue: 7
  • 105
  • 2555
  • Pages: 50-56

Stress and strain state of road slabs during production and use in the Western Siberia conditions

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2015
  • Issue: 7
  • 32
  • 2311
  • Pages: 39-49

The main aspects of the value-oriented management of investment and construction housing projects

Technology and organization of construction
  • Year: 2015
  • Issue: 7
  • 43
  • 2116
  • Pages: 18-29

Analysis of local stability of the rectangular tubes filled with concrete

Building constructions, buildings and structures
  • Year: 2016
  • Issue: 4
  • 37
  • 2363
  • Pages: 59-68

The conference “Inspection of buildings and structures: problems and solutions”

Monitoring and testing of buildings and structures
  • Year: 2015
  • Issue: 6
  • 19
  • 2233
  • Pages: 4-7

Behaviour analysis of load-bearing aluminium members

Structural mechanics
  • Year: 2015
  • Issue: 5
  • 20
  • 2360
  • Pages: 86-96

Thermophysical field testing of residential buildings made of autoclaved aerated concrete blocks

Energy efficiency and thermal protection of buildings
  • Year: 2016
  • Issue: 4
  • 84
  • 3276
  • Pages: 10-25

Evaluation of installation efforts in metal coatings, allowing for assembly process

Structural mechanics
  • Year: 2015
  • Issue: 4
  • 10
  • 2283
  • Pages: 28-37

Structural health monitoring of a concrete-filled tube column

Building constructions, buildings and structures
  • Year: 2019
  • Issue: 1
  • 73
  • 2588
  • Pages: 136-145

Experimental justification of a way to increase complex technological effectiveness of steel rod structure

Structural mechanics
  • Year: 2015
  • Issue: 2
  • 5
  • 2079
  • Pages: 86-99

Development of Methodology for Time Management of Construction Projects

Technology and organization of construction
  • Year: 2016
  • Issue: 2
  • 96
  • 2461
  • Pages: 102-112

Modeling a set of concrete strength in the program ELCUT at warming of monolithic structures by wire

Technology and organization of construction
  • Year: 2015
  • Issue: 2
  • 33
  • 3027
  • Pages: 33-45

Prospects of metal as a construction material

Building constructions, buildings and structures
  • Year: 2015
  • Issue: 2
  • 37
  • 2322
  • Pages: 4-5

Accounting for the elements stiffness change in the course of erection and operation

Structural mechanics
  • Year: 2015
  • Issue: 1
  • 32
  • 2777
  • Pages: 6-14

Damage identity in fatigue assessment of structures

Building constructions, buildings and structures
  • Year: 2016
  • Issue: 1
  • 17
  • 2810
  • Pages: 82-88

Optimal design of 3d frame structures taking into account the stress and multiple natural frequency constraints

Structural mechanics
  • Year: 2016
  • Issue: 1
  • 33
  • 2748
  • Pages: 74-81

BIM in the assessment of labor protection

Technology and organization of construction
  • Year: 2017
  • Issue: 1
  • 115
  • 3009
  • Pages: 77-88

Design features of facade cassettes from thin ceramics

Building constructions, buildings and structures
  • Year: 2017
  • Issue: 1
  • 47
  • 3030
  • Pages: 64-76

Deformation of concrete creep in the thermal stress state calculation of massive concrete and reinforced concrete structures

Structural mechanics
  • Year: 2017
  • Issue: 1
  • 41
  • 2978
  • Pages: 56-63

Lifetime of earth dams

Hydraulic engineering
  • Year: 2017
  • Issue: 1
  • 60
  • 3080
  • Pages: 34-43

Computational modelling of random distribution of stresses for wooden structures

Structural mechanics
  • Year: 2017
  • Issue: 1
  • 34
  • 2434
  • Pages: 23-33

Evaluation methods of asphalt pavement service life

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2017
  • Issue: 2
  • 92
  • 2396
  • Pages: 42-56

Deformations of the periodic truss with diagonal lattice

Structural mechanics
  • Year: 2017
  • Issue: 3
  • 17
  • 2166
  • Pages: 61-67

The thermo-stressed state in massive concrete structures

Structural mechanics
  • Year: 2017
  • Issue: 3
  • 48
  • 2382
  • Pages: 51-60

Disaggregation of ultrafine powders in conditions of ultrasonic cavitation

Building Materials
  • Year: 2017
  • Issue: 3
  • 28
  • 2286
  • Pages: 21-29

Computation of mooring quay in the form of pile grillage

Hydraulic engineering
  • Year: 2017
  • Issue: 3
  • 39
  • 2565
  • Pages: 10-20

Recycling of spent battery electrolytes for construction material production

Building Materials
  • Year: 2017
  • Issue: 3
  • 35
  • 2072
  • Pages: 3-9

Mechanical properties of nanocarbon modified cement

Building Materials
  • Year: 2017
  • Issue: 4
  • 47
  • 2400
  • Pages: 54-61

Design of steel beams cross three directions with sprengel

Structural mechanics
  • Year: 2017
  • Issue: 4
  • 17
  • 2037
  • Pages: 46-53

Buildings quasi-stationary thermal behavior

Energy efficiency and thermal protection of buildings
  • Year: 2017
  • Issue: 4
  • 20
  • 2115
  • Pages: 28-35

Program Evaluation and Review Technique as the tool for time control

Technology and organization of construction
  • Year: 2017
  • Issue: 4
  • 67
  • 2266
  • Pages: 12-19

Design methods of timber-concrete composite ceiling structure

Building constructions, buildings and structures
  • Year: 2017
  • Issue: 5
  • 38
  • 2395
  • Pages: 88-95

Effect of rustication joints on air mode in ventilated facade

Energy efficiency and thermal protection of buildings
  • Year: 2017
  • Issue: 5
  • 40
  • 2472
  • Pages: 40-48

Stress-strain state of precast and cast-in place buildings

Structural mechanics
  • Year: 2017
  • Issue: 6
  • 32
  • 2140
  • Pages: 175-184

Stress-strain state of composite reinforced concrete slab elements under fire activity

Fire safety in construction
  • Year: 2017
  • Issue: 6
  • 53
  • 2404
  • Pages: 161-174

Influence of superplasticizers on the concrete mix properties

Building Materials
  • Year: 2017
  • Issue: 6
  • 72
  • 2693
  • Pages: 140-146

The forming cyclic loads on the offshore structures during ice field edge fracture

Hydraulic engineering
  • Year: 2017
  • Issue: 6
  • 16
  • 2193
  • Pages: 118-139

Reasons of delays in construction projects

Technology and organization of construction
  • Year: 2017
  • Issue: 6
  • 116
  • 2304
  • Pages: 61-69

Level ice interactions with multi-legged offshore structures

Hydraulic engineering
  • Year: 2017
  • Issue: 6
  • 26
  • 2221
  • Pages: 43-52

The periodic temperature oscillations in a cylindrical profile with a large thickness

Energy efficiency and thermal protection of buildings
  • Year: 2019
  • Issue: 1
  • 31
  • 2588
  • Pages: 51-58

Oriented particle boards: effect of the tangential load component

Structural mechanics
  • Year: 2017
  • Issue: 6
  • 12
  • 2004
  • Pages: 33-42

Strength and deformation characteristics of ash and slag mixture

Building Materials
  • Year: 2017
  • Issue: 6
  • 50
  • 2303
  • Pages: 3-16

Selection criteria of space planning and structural solutions of low-rise buildings

Technology and organization of construction
  • Year: 2017
  • Issue: 7
  • 48
  • 2280
  • Pages: 84-93

Impact of forest fires on buildings and structures

Fire safety in construction
  • Year: 2017
  • Issue: 7
  • 72
  • 2435
  • Pages: 15-22

Dynamic stability of the lattice truss of the bridge taking into account local oscillations

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2017
  • Issue: 8
  • 25
  • 2387
  • Pages: 266-278

Purification of hot water by zeolite modified with manganese dioxide

Energy efficiency and thermal protection of buildings
  • Year: 2017
  • Issue: 8
  • 15
  • 2585
  • Pages: 201-213

Thermal cracking resistance in massive foundation slabs in the building period

Grounds and foundations, underground structures
  • Year: 2017
  • Issue: 8
  • 49
  • 2441
  • Pages: 193-200

Flat rod systems: optimization with overall stability control

Structural mechanics
  • Year: 2017
  • Issue: 8
  • 32
  • 2445
  • Pages: 181-192

Stress-strain state of three-layered shallow shells under conditions of nonlinear creep

Structural mechanics
  • Year: 2017
  • Issue: 8
  • 29
  • 2334
  • Pages: 156-168

Earthquake engineering optimization of structures by economic criterion

Monitoring and testing of buildings and structures
  • Year: 2017
  • Issue: 8
  • 70
  • 2837
  • Pages: 67-83

Indoor environment of a building under the conditions of tropical climate

Energy efficiency and thermal protection of buildings
  • Year: 2017
  • Issue: 8
  • 24
  • 2205
  • Pages: 50-57

The simulation models of river flow management by a system of flood control facilities

Hydraulics and Engineering Hydrology
  • Year: 2017
  • Issue: 8
  • 36
  • 2336
  • Pages: 40-49

Bearing capacity of rafter systems made of steel thin-walled structures in attic roofs

Structural mechanics
  • Year: 2017
  • Issue: 8
  • 45
  • 2394
  • Pages: 28-39

Numerical simulation of ventilated facades under extreme climate conditions

Energy efficiency and thermal protection of buildings
  • Year: 2018
  • Issue: 1
  • 81
  • 3162
  • Pages: 130-140

Organizational and technological reliability of the construction process

Technology and organization of construction
  • Year: 2018
  • Issue: 1
  • 92
  • 3023
  • Pages: 59-67

Ventilated facade integrated with the HVAC system for cold climate

Energy efficiency and thermal protection of buildings
  • Year: 2018
  • Issue: 1
  • 68
  • 3264
  • Pages: 47-58

Adaptive finite-element models in structural health monitoring systems

Technology and organization of construction
  • Year: 2018
  • Issue: 2
  • 61
  • 2361
  • Pages: 169-178

Heat dissipation of cement and calculation of crack resistance of concrete massifs

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 2
  • 52
  • 2548
  • Pages: 128-135

Influence of heat conducting inclusions on reliability of the system “sandwich panel – metal frame”

Energy efficiency and thermal protection of buildings
  • Year: 2018
  • Issue: 2
  • 40
  • 2617
  • Pages: 116-127

The behavior of concentric brace with bounded fuse

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 2
  • 16
  • 2223
  • Pages: 16-29

Alternative engineering of steel girder cages by geometrical methods

Structural mechanics
  • Year: 2018
  • Issue: 2
  • 60
  • 2155
  • Pages: 3-15

The formation of the seabed surface relief near the gravitational object

Hydraulic engineering
  • Year: 2018
  • Issue: 3
  • 26
  • 2308
  • Pages: 120-131

Behavior of a hollowed-wood ventilated façade during temperature changes

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 3
  • 37
  • 2188
  • Pages: 103-111

Fire protective dry plaster composition for structures in hydrocarbon fire

Fire safety in construction
  • Year: 2018
  • Issue: 3
  • 79
  • 2510
  • Pages: 86-94

Thermal cracking resistance in massive steel-reinforced concrete structures

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 3
  • 32
  • 2225
  • Pages: 45-53

Strength of composite steel and concrete beams of highperformance concrete

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 3
  • 77
  • 2361
  • Pages: 36-44

Diagnostics of fatigue fractures of building structures elements

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 4
  • 36
  • 2283
  • Pages: 195-203

Construction of autonomous buildings with wind power plants

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2018
  • Issue: 4
  • 57
  • 2414
  • Pages: 171-180

Seismic design optimization considering base-isolation system

Technology and organization of construction
  • Year: 2018
  • Issue: 4
  • 43
  • 2260
  • Pages: 138-150

Engineering solutions for the social housing, integrated into urban environment

Architecture and Urban planning
  • Year: 2018
  • Issue: 4
  • 68
  • 2172
  • Pages: 104-118

Influence of stiffness of node on stability and strength of thin-walled structure

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 4
  • 59
  • 2468
  • Pages: 48-61

Min-cut algorithm for network schedule by merging the vertices

Technology and organization of construction
  • Year: 2018
  • Issue: 4
  • 15
  • 1972
  • Pages: 37-47

Wooden beams with reinforcement along a curvilinear trajectory

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 5
  • 44
  • 2511
  • Pages: 193-201

The modeling method of discrete cracks in reinforced concrete under the torsion with bending

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 5
  • 58
  • 2738
  • Pages: 160-173

Protection of construction materials based on acrylates from biodeterioration

Building Materials
  • Year: 2018
  • Issue: 5
  • 31
  • 2175
  • Pages: 116-124

Long-range technologies of site autoclaved aerated concrete use for lagging

Building Materials
  • Year: 2008
  • Issue: 1
  • 18
  • 1735
  • Pages: 38-41

Foundation construction technology - "pile in the pipe"

Grounds and foundations, underground structures
  • Year: 2008
  • Issue: 1
  • 26
  • 1939
  • Pages: 33-37

Vacuum sound insulating structures

Building constructions, buildings and structures
  • Year: 2008
  • Issue: 1
  • 9
  • 1861
  • Pages: 22-29

Natural oscillations of a rectangular plates with two adjacent edges clamped

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 6
  • 52
  • 2492
  • Pages: 81-94

Survivability of structural systems of buildings with special effects

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 5
  • 97
  • 3237
  • Pages: 73-78

Bearing capacity of pasted anchors in the masonry walls of natural limestone

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 5
  • 29
  • 2239
  • Pages: 52-63

Reliability assessment of the construction schedule by the critical chain method

Technology and organization of construction
  • Year: 2018
  • Issue: 5
  • 155
  • 2846
  • Pages: 25-31

Heating and charring of timber constructions with thin-layer fire protection

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 5
  • 55
  • 2256
  • Pages: 3-14

Numerical modelling of tides and tsunami waves propagation

Hydraulic engineering
  • Year: 2018
  • Issue: 6
  • 36
  • 2272
  • Pages: 228-242

Finite element models in stresses for bending plates

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 6
  • 33
  • 2046
  • Pages: 170-190

Local fuse for improving concentric braces behavior

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 6
  • 21
  • 2007
  • Pages: 149-162

Nonlinear parametric oscillations of viscoelastic plate of variable thickness

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 6
  • 43
  • 2698
  • Pages: 112-126

Lightweight steel concrete structures technology with foam fiber-cement sheets

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 6
  • 115
  • 3140
  • Pages: 103-111

Strength evaluation of the Prussian vaults made from brick aggregate concrete

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 6
  • 81
  • 3200
  • Pages: 95-102

Adhesive dry mix using an amorphous aluminosilicates

Building Materials
  • Year: 2018
  • Issue: 6
  • 24
  • 2104
  • Pages: 23-29

The nonlinear stress-strain state of the concrete-filled steel tube structures

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 7
  • 33
  • 2128
  • Pages: 73-82

Structure and mineral composition of soil-cement with complex additive

Building Materials
  • Year: 2018
  • Issue: 7
  • 23
  • 2254
  • Pages: 38-48

Reliability estimation of industrial building structures

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 7
  • 61
  • 2511
  • Pages: 24-37

Compatibility of precast heavy and monolithic lightweight concretes deforming

Building Materials
  • Year: 2018
  • Issue: 8
  • 31
  • 2160
  • Pages: 162-172

Thermal protection of low-rise buildings from light steel thin-walled structures

Energy efficiency and thermal protection of buildings
  • Year: 2018
  • Issue: 8
  • 83
  • 2441
  • Pages: 140-149

Cement based foam concrete with aluminosilicate microspheres for monolithic construction

Building Materials
  • Year: 2018
  • Issue: 8
  • 55
  • 2511
  • Pages: 86-96

Fireproof suspended ceilings with high fire resistance limits

Fire safety in construction
  • Year: 2018
  • Issue: 8
  • 86
  • 2764
  • Pages: 75-85

The building extension with energy efficiency light-weight building walls

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 8
  • 77
  • 2781
  • Pages: 67-74

Scheduling workflows for scattered objects

Building constructions, buildings and structures
  • Year: 2018
  • Issue: 8
  • 41
  • 2225
  • Pages: 29-40